Netgear FVS336G-100NAS Reference Manual - Page 106
Configuring the VPN Client, Secure Gateway Tunnel
View all Netgear FVS336G-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual 2. Select the VPN Client radio button for type of VPN connection. 3. Give the client connection a name, such as "home". 4. Enter a value for the pre-shared key. 5. Check either the WAN1 or WAN2 radio box to select the WAN interface tunnel. 6. Enter the remote WAN's IP Address or Internet Name and then enter the local WAN's IP Address or Internet Name. In this example, we are using their FQDNs. (Both the local and remote addresses must be of the same type-either both must be FQDN or both must be an IP address.) 7. Click Apply to create the "home" VPN Client. The VPN Policies screen is displayed showing the VPN Client policy as enabled. 8. Click the IKE Policies tab to display the IKE Policies table and click Edit adjacent to the "home" policy to view the "home" policy details. You can augment user authentication security by enabling the XAUTH server by selecting the Edge Device radio box and then adding users to the user database (see "Extended Authentication (XAUTH) Configuration" on page 5-25 and "User Database Configuration" on page 5-27, respectively). As an alternative to the local user database, you can also choose a RADIUS server. Configuring the VPN Client From a PC with the Netgear Prosafe VPN Client installed, you can configure a VPN client policy to connect to the FVS336G. To configure your VPN client: 1. Right-click on the VPN client icon in your Windows toolbar and choose Security Policy Editor. 2. In the upper left of the Policy Editor window, click the New Document icon to open a New Connection.Give the New Connection a name, such as to_FVG. 3. From the ID Type pull-down menu, choose IP Subnet. 4. Enter the LAN IP Subnet Address and Subnet Mask of the FVS336G LAN. Check the Connect using radio box and choose Secure Gateway Tunnel from the pull-down menu. 5. From the first ID Type pull-down menus, choose Domain Name and enter the FQDN address of the FVS336G. 6. From the second ID Type pull-down menu, choose Gateway IP Address and enter the WAN IP Gateway address of the FVS336G. 5-18 Virtual Private Networking Using IPsec v1.0, October 2007