Netgear FVS336G-100NAS Reference Manual - Page 199
Appendix A Default Settings and Technical Specifications
View all Netgear FVS336G-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Appendix A Default Settings and Technical Specifications You can use the reset button located on the rear panel to reset all settings to their factory defaults. This is called a hard reset. • To perform a hard reset, press and hold the reset button for approximately 10 seconds (until the TEST LED blinks rapidly). Your device will return to the factory configuration settings shown in Table A-1 below. • Pressing the reset button for a shorter period of time will simply cause your device to reboot. Table A-1. VPN firewall Default Configuration Settings Feature Router Login User Login URL User Name (case sensitive) Login Password (case sensitive) Internet Connection WAN MAC Address WAN MTU Size Port Speed Local Network (LAN) Lan IP Address Subnet Mask RIP Direction RIP Version RIP Authentication DHCP Server DHCP Starting IP Address DHCP Ending IP Address Management Default Behavior https://192.168.1.1 admin password Use Default address 1500 AutoSense 192.168.1.1 255.255.255.0 None Disabled Disabled Enabled 192.168.1.2 192.168.1.100 A-1 v1.0, October 2007