Netgear FVS336G-100NAS Reference Manual - Page 36
Other PPPoE, Account Name, Domain Name., Idle Timeout., Austria PPTP, My IP Address.
View all Netgear FVS336G-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual a. Select Other (PPPoE). Figure 2-8 b. Configure the following fields: • Account Name. Valid account name for the PPPoE connection • Domain Name. Name of your ISP's domain or your domain name if your ISP has assigned one. In most cases, you may leave this field blank. • Idle Timeout. Select Keep Connected, to keep the connection always on. To logout after the connection is idle for a period of time, click Idle Time and in the timeout field enter the number of minutes to wait before disconnecting. 6. If your ISP is Austria Telecom or any other ISP that uses PPTP as a login protocol: a. Select Austria (PPTP). b. Configure the following fields: • Account Name (also known as Host Name or System Name). Enter the valid account name for the PPTP connection (usually your email name as assigned by your ISP). Some ISPs require entering your full email address here. • Domain Name. Your domain name or workgroup name assigned by your ISP, or your ISPs domain name. You may leave this field blank. • Idle Timeout. Check the Keep Connected radio box to keep the connection always on. To logout after the connection is idle for a period of time, click Idle Time and enter the number of minutes to wait before disconnecting in the timeout field. This is useful if your ISP charges you based on the amount of time you have logged in. • My IP Address. IP address assigned by the ISP to make the connection with the ISP server. • Server IP Address. IP address of the PPTP server. 7. If your ISP is Telstra BigPond Cable: 2-10 Connecting the FVS336G to the Internet v1.0, October 2007