Netgear FVS336G-100NAS Reference Manual - Page 165

IP_address&gt, FullyQualifiedDomainName&gt, Setting User Login Policies

Page 165 highlights

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual . Figure 8-3 2. Click the Yes radio box to enable HTTPS remote management (enabled by default). Note: For enhanced security, restrict access to as few external IP addresses as practical. See "Setting User Login Policies" on page 7-6 for instructions on restricting administrator access. Be sure to use strong passwords. 3. Click Apply to have your changes take effect. When accessing your VPN firewall from the Internet, the Secure Sockets Layer (SSL) will be enabled. You will enter https:// (not http://) and type your firewall's WAN IP address into your browser. For example, if your WAN IP address is 172.16.0.123, type the following in your browser: https://172.16.0.123 The VPN firewall's remote login URL is https:// or https://.. Note: To maintain security, the FVS336G will reject a login that uses http://address rather than the SSL https://address. Note: The first time you remotely connect to the FVS336G with a browser via SSL, you may get a warning message regarding the SSL certificate. If you are using a Windows computer with Internet Explorer 5.5 or higher, simply click Yes to accept the certificate. Router and Network Management v1.0, October 2007 8-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
Router and Network Management
8-11
v1.0, October 2007
.
2.
Click the
Yes
radio box to enable HTTPS remote management (enabled by default).
3.
Click
Apply
to have your changes take effect.
When accessing your VPN firewall from the Internet, the Secure Sockets Layer (SSL) will be
enabled. You will enter
https://
(not
http://
) and type your firewall’s WAN IP address into your
browser. For example, if your WAN IP address is 172.16.0.123, type the following in your
browser:
The VPN firewall’s remote login URL is
https://<
IP_address>
or
https://<
FullyQualifiedDomainName>
..
Figure 8-3
Note:
For enhanced security, restrict access to as few external IP addresses as
practical. See
“Setting User Login Policies” on page 7-6
for instructions on
restricting administrator access. Be sure to use strong passwords.
Note:
To maintain security, the FVS336G will reject a login that uses
http://address
rather than the SSL
https://address
.
Note:
The first time you remotely connect to the FVS336G with a browser via SSL, you
may get a warning message regarding the SSL certificate. If you are using a
Windows computer with Internet Explorer 5.5 or higher, simply click Yes to accept
the certificate.