Netgear FVS336G-100NAS Reference Manual - Page 127

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual Table 6-1. Port Forwarding Applications/TCP Port Numbers (continued) TCP Application Port Number HTTP (web) 80 POP3 (receive mail) 110 NTP (network time protocol) 123 Citrix 1494 Terminal Services 3389 VNC (virtual network computing) 5900 or 5800 a. Users can specify the port number together with the host name or IP address. 4. Click Add. The "Operation Succeeded" message appears at the top of the tab, and the new application entry is listed in the List of Configured Applications. 5. Repeat this process to add other applications for use in Port Forwarding. Adding A New Host Name Once the server IP address and port information has been configured, remote users will be able to access the private network servers using Port Forwarding. As a convenience for users, you can also specify host name to IP address resolution for the network servers. Host Name Resolution allows users to access TCP applications at familiar addresses such as mail.example.com or ftp.example.com rather than by IP addresses. To add a host name for client name resolution, follow these steps: 1. Select the Port Forwarding tab, shown in Figure 6-4. 2. If the server you want to name does not appear in the List of Configured Applications for Port Forwarding, you must add it before you can rename it. 3. In the Add New Host Name for Port Forwarding section, enter the IP address of the server you want to name. 4. In the Fully Qualified Domain Name field, enter the full server name. 5. Click Add. The "Operation Succeeded" message appears at the top of the tab, and the new entry is listed in the List of Configured Host Names. Virtual Private Networking Using SSL Connections 6-9 v1.0, October 2007