Netgear FVS336G-100NAS Reference Manual - Page 96
Creating a VPN Tunnel Connection to a VPN Client, VPN Wizard
View all Netgear FVS336G-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual Figure 5-6 Creating a VPN Tunnel Connection to a VPN Client You can set up multiple remote VPN Client policies through the VPN Wizard by changing the default End Point Information settings created for each policy by the wizard. A remote client policy can support up to 200 clients. The remote clients must configure the "Local Identity" field in their policy as "PolicyName.fvs_remote.com", where X stands for a number from 1 to 25. As an example, if the client-type policy on the VPN firewall is configured with "home" as the policy name, and if two users are required to connect using this policy, then the "Local Identity" in their policy should be configured as "home1.fvs_remote.com" and "home2.fvs_remote.com," respectively. To configure the VPN client: 1. Select VPN > VPN Wizard from the main menu. The VPN Wizard screen is displayed 5-8 Virtual Private Networking Using IPsec v1.0, October 2007