Netgear FVS336G-100NAS Reference Manual - Page 116
RADIUS Client, Primary RADIUS Server IP address, Secret Phrase, To con the Primary RADIUS Server
View all Netgear FVS336G-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual username/password or some encrypted response using his username/password information. The gateway will try and verify this information first against a local User Database (if RADIUS-PAP is enabled) and then by relaying the information to a central authentication server such as a RADIUS server. To configure the Primary RADIUS Server: 1. Select VPN > IPsec VPN from the main menu. 2. Click the RADIUS Client tab. The RADIUS Client screen is displayed. Figure 5-15 3. To activate (enable) the Primary RADIUS server, click the Yes radio button. The primary server options become active. 4. Configure the following entries: • Primary RADIUS Server IP address. The IP address of the RADIUS server. • Secret Phrase. Transactions between the client and the RADIUS server are authenticated using a shared secret phrase, so the same Secret Phrase must be configured on both client and server. 5-28 Virtual Private Networking Using IPsec v1.0, October 2007