Netgear FVS336G-100NAS Reference Manual - Page 71
Creating a LAN WAN Inbound Services Rule, Apply, Outbound Services, Add LAN WAN Inbound Service
View all Netgear FVS336G-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual 2. Configure the parameters based on the descriptions in Table 4-1 on page 4-3. 3. Click Apply to save your changes and reset the fields on this screen. The new rule will be listed on the Outbound Services table. Creating a LAN WAN Inbound Services Rule This Inbound Services Rules table lists all existing rules for inbound traffic. If you have not defined any rules, no rules will be listed. By default, all inbound traffic is blocked. Remember that allowing inbound services opens holes in your firewall. Only enable those ports that are necessary for your network. To create a new inbound service rule in the LAN WAN Rules tab: 1. Click Add under the Inbound Services Table. The Add LAN WAN Inbound Service screen is displayed. Figure 4-3 2. Configure the parameters based on the descriptions in Table 4-2 on page 4-5. 3. Click Apply to save your changes and reset the fields on this screen. The new rule will be listed on the Inbound Services table. Firewall Protection and Content Filtering 4-9 v1.0, October 2007