Netgear FVS336G-100NAS Reference Manual - Page 170
Configuring Date and Time Service, Router Upgrade, Browse., Upload., Monitoring, Time Zone, Warning
View all Netgear FVS336G-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual After downloading an upgrade file, you may need to unzip (uncompress) it before upgrading the VPN firewall. If release notes are included in the download, read them before continuing. To upgrade the router software: 1. Select Administration > Settings Backup and Firmware Upgrade from the main menu. 2. In the Router Upgrade section, click Browse. 3. Locate the downloaded file and click Upload. This will start the software upgrade to your VPN firewall. This may take some time. At the conclusion of the upgrade, your VPN firewall will reboot. Warning: Do not try to go online, turn off the VPN firewall, shutdown the computer or do anything else to the VPN firewall until the VPN firewall finishes the upgrade! When the Test light turns off, wait a few more seconds before doing anything. 4. After the VPN firewall has rebooted, click Monitoring and confirm the new firmware version to verify that your VPN firewall now has the new software installed. Note: In some cases, such as a major upgrade, it may be necessary to erase the configuration and manually reconfigure your VPN firewall after upgrading it. Refer to the release notes included with the software to find out if this is required. Configuring Date and Time Service Date, time and NTP server designations can be reset on the Time Zone screen. Network Time Protocol (NTP) is a protocol that is used to synchronize computer clock times in a network of computers. To set Time, Date and NTP servers: 1. Select Administration > Time Zone from the main menu. The Time Zone screen is displayed. 8-16 v1.0, October 2007 Router and Network Management