Netgear FVS336G-100NAS Reference Manual - Page 23
Rear Panel Features
View all Netgear FVS336G-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual Table 1-1. LED Descriptions (continued) Object LINK/ACT (Link and Activity) LAN Ports SPEED LINK/ACT (Link and Activity) Activity On (Green) Blinking (Green) Off On (Green) On (Amber) Off On (Green) Blinking (Green) Off Description The WAN port has detected a link with a connected Ethernet device. Data is being transmitted or received by the WAN port. The WAN port has no link. The LAN port is operating at 1,000 Mbps. The LAN port is operating at 100 Mbps. The LAN port is operating at 10 Mbps. The WAN port has detected a link with a connected Ethernet device. Data is being transmitted or received by the WAN port. The WAN port has no link. Rear Panel Features The rear panel of the ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN includes Gigabit Ethernet LAN and WAN connections, a cable lock receptacle, power and reset switches, and an AC power connection. Figure 1-2 Viewed from left to right, the rear panel contains the following elements: 1. Factory Defaults button. Using a sharp object, press and hold this button for about ten seconds until the front panel TEST light flashes to reset the VPN firewall to factory default settings. All configuration settings will be lost and the default password will be restored. 2. LAN Ethernet ports. Four switched N-way automatic speed negotiating, Auto MDI/MDIX, Gigabit Ethernet ports with RJ-45 connectors. Introduction 1-7 v1.0, October 2007