Netgear GSM7328Sv2 7000 Series Managed Switch version 8.0 CLI Reference Manual
Netgear GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Manual
View all Netgear GSM7328Sv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Netgear GSM7328Sv2 manual content summary:
- Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 1
ProSafe 7300S Managed Switches CLI Manual, Version 8.0 NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134 202-10528-01 July 2009 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 2
and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume to certain restrictions. Please refer to the notes in the operating instructions. The Federal Office for Telecommunications Approvals has been notified of - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 3
Product and Publication Details Model Number: Publication Date: Product Family: Product Name: Home or Business Product: Language: Publication Part Number: Publication Version Number GSM7328S, GSM7352S, GSM7328FS, GSM7328Sv2, and GSM7352Sv2 July 2009 managed switch ProSafe 7300S Series Layer-3 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 4
About This Manual This document describes command-line interface (CLI) commands you use to view and configure 7300S Series Stackable Switch software. You can access the CLI by - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 5
GSM7328FS, GSM7328Sv2, and GSM7352Sv2). Some of the commands described in this manual can only be used on GSM7328Sv2 and GSM7352Sv2 switches. These commands are documentation refers to these two switches as GSM7328Sv1 and GSM7352Sv1. Also shown are the GSM7328Sv2 and GSM7352Sv2 switches. Version - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 6
file and server names, extensions User input, IP addresses, GUI screen text Command prompt, CLI text, code URL links • Formats. This manual uses the following formats to highlight special messages: Internet, firewall, and VPN technologies, go to: http:// kbserver.netgear.com. xi v1.0, July 2009 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 7
How to Print This Manual 7300S Managed Switches CLI Manual, Version 8.0 To print this manual, your computer must have the free Adobe Acrobat reader installed in order Version Number Date Description 202-10528-01 1.0 July 2009 7300S Managed Switches CLI Manual, Version 8.0 xii v1.0, July 2009 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 8
Contents About This Manual Audience ...xi About Managed Switch Software xi Scope ...xi Chapter 1 Using the Command-Line Interface Command Syntax ...1-1 Command Conventions 1-2 Common Parameter Values 1-3 Unit/Slot/Port - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 9
Managed Switch CLI Manual, Release 8.0 Provisioning (IEEE 802.1p) Commands 3-51 Protected Ports Commands 3- of Service Commands 3-192 MAC Database Commands 3-204 ISDP Commands ...3-206 Chapter 4 Routing Commands Address Resolution Protocol (ARP) Commands 4-1 IP Routing Commands 4-8 Router - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 10
Managed Switch CLI Manual, Release 8.0 Chapter 5 IP Multicast Commands Multicast Commands ...5-1 DVMRP Commands ...5-7 PIM-DM DiffServ Policy Commands 8-19 DiffServ Service Commands 8-25 DiffServ Show Commands 8-26 MAC Access Control List (ACL) Commands 8-32 IP Access Control List (ACL) Commands - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 11
Managed Switch CLI Manual, Release 8.0 Client Commands 9-55 Packet Capture Commands 9-61 Serviceability Packet Tracing Commands 9-63 Cable Test Command TACACS+ Commands 11-67 Configuration Scripting Commands 11-71 Pre-login Banner and System Prompt Commands 11-73 Chapter 11 Log Messages - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 12
Managed Switch CLI Manual, Release 8.0 Switching ...11-10 QoS ...11-16 Routing/IPv6 Routing 11-17 Multicast ...11-21 Stacking ...11-23 Technologies ...11-23 O/S Support ...11-26 Chapter 12 Captive Portal Commands Capitve Portal Global Commands 12-1 Captive Portal Configuration Commands 12-5 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 13
Chapter 1 Using the Command-Line Interface The command-line interface (CLI) is a text-based way to manage and monitor the system. You can access the CLI by using a direct serial connection or by using a remote logical connection with telnet or SSH. This chapter describes the CLI syntax, conventions, - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 14
Managed Switch CLI Manual, Release 8.0 • network parms is the command name. • and are parameters and represent required values that you must enter after you type the command - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 15
Common Parameter Values Managed Switch CLI Manual, Release 8.0 Parameter values might be names (strings) or numbers.To use is a valid IP address. You can enter the IP address in the following formats: a (32 bits) a.b (8.24 bits) a.b.c (8.8.16 bits) a.b.c.d (8.8.8.8) ipv6-address In addition to - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 16
Switch CLI Manual, Release follow physical slots and identify port-channel (LAG) or router interfaces. The CPU slots immediately follow the logical slots point links that carry encapsulated packets. CPU ports are handled by the driver as one or more physical entities located on physical slots. Note: - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 17
without requiring the IPv6 Routing package in the system. The management address can be associated with the network port (front-panel switch ports), a routine interface (port or VLAN) and the Service port. • Stacking Not all modules are available for all platforms or software releases. Command - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 18
CLI Manual, example, a switch that does not support BGPv4 does not have the Router BGPv4 Command Mode. Table 5. CLI setup commands and permits you to make modifications to the running configuration. Groups all the VLAN commands. Manages the operation of an interface and provides access to the router - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 19
Manual, Release 8.0 Table 5. CLI Command Modes (continued) Command Mode Prompt Router OSPFv3 Config Switch (Config rtr)# Router RIP Config Switch (Config-router)# Router BGP Config Switch (Config-router server IP address pool configuration commands. Contains the DHCPv6 server IPv6 address pool - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 20
Switch CLI Manual, Release 8.0 Table 6. CLI Mode Access and Exit (continued) Command Mode Access Method Exit or Access Previous Mode Line Config Policy-Map Config Policy-Class-Map Config Class-Map Config Ipv6-Class-Map Config Router OSPF Config Router OSPFv3 Config Router RIP Config Router BGP - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 21
Managed Switch CLI Manual, Release 8.0 Table 6. CLI Mode Access and Exit (continued) Command Mode Access Method Exit or Access Previous Mode TACACS Config From the Global Config mode, enter tacacs-server host , where is the IP address of the TACACS server on your network. To - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 22
Managed Switch CLI Manual, Release 8.0 Table 7. CLI Error Messages Message Text % Invalid input detected at '^' marker. Command not found / Incomplete command. Use ? to list commands. Ambiguous command Description Indicates - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 23
Managed Switch CLI Manual, Release 8.0 Table 8. CLI Editing Conventions router. Select DHCP, BootP, or None as the network config protocol. If the help output shows a parameter in angle brackets, you must replace the parameter with a value. (switch) #network parms ? Enter the IP address - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 24
direct connection to the console port. You cannot access the system remotely until the system has an IP address, subnet mask, and default gateway. You can set the network configuration information manually, or you can configure the system to accept these settings from a BOOTP or DHCP server on your - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 25
Chapter 2 Stacking Commands The Stacking Commands chapter includes the following sections: • "Dedicated Port Stacking" on page 2-1 • "Front Panel Stacking Commands" on page 2-10 Note: The commands in this chapter are in one of two functional groups: Note: Show commands display switch settings, - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 26
Managed Switch CLI Manual, Release 8.0 member This command configures a switch. The is the switch identifier of the switch to be added/removed from the stack. The is the index into the database of the supported switch types, indicating the type of the switch being preconfigured - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 27
Managed Switch CLI Manual, Release 8.0 switch renumber This command changes the switch identifier for a EXEC) command before performing the stack move. A stack move causes all routes and layer 2 addresses to be lost. This command is executed on the Primary Management Unit. The system prompts you - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 28
Managed Switch CLI Manual, Release 8.0 slot This command configures a slot in the system. The is the slot identifier of the slot. The is the index into the database of the supported card types, indicating the type of the card being preconfigured in the specified slot. The - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 29
Managed Switch CLI Manual, Release 8.0 If a card or other module is present in the slot, this administrative mode will effectively be applied to the contents of the slot. If - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 30
Managed Switch CLI Manual, Release 8.0 no set slot power This command unconfigures the power mode of the slot(s) and prohibits power from being supplied to a card located in the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 31
Managed Switch CLI Manual, Release 8.0 Term Pluggable Definition Cards are pluggable or non- Identifier Definition The index into the database of the supported card types. This index is used when preconfiguring a slot. The model identifier for the supported card type. If you supply a value for - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 32
Managed Switch CLI Manual, Release 8.0 show switch This command displays information about all units in the stack or a single unit when you specify the unit value. Format Mode show - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 33
Managed Switch CLI Manual, Release 8.0 Term Definition Switch Status The switch status. Possible values member to be added to the stack. Model Identifier The model identifier for the supported switch type. Management Preference The management preference value of the switch type. Code Version - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 34
Managed Switch CLI Manual, Release 8.0 Term Model Identifier Switch Description Definition The model identifier for the supported switch type. The description for the supported switch type. Front Panel Stacking Commands This section describes the commands you use to view and configure front - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 35
Managed Switch CLI Manual, Release 8.0 Term Definition Configured Stack Stack or Ethernet. Mode Running Stack Mode Stack or Ethernet. Link Status Status of the link. Link Speed Speed (Gbps) - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 36
Managed Switch CLI Manual, Release 8.0 Term Unit Interface Diagnostic Entry1 Diagnostic Entry2 Diagnostic Entry3 Definition The unit number. The slot and port numbers. 80 character string used for diagnostics. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 37
Chapter 3 Switching Commands This chapter describes the switching commands available in the managed switch CLI. The Switching Commands chapter includes the following sections: • "Port Configuration Commands" on page 3-2 • "show port description" on page 3-9 • "VLAN Commands" on page 3-31 • "Double - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 38
Managed Switch CLI Manual, Release 8.0 • "Port Security Commands" on page 3-166 • "LLDP (802.1AB) Commands" on page 3-170 • "LLDP-MED Commands" on page 3-181 • "Denial of Service Commands" on page 3-192 • "MAC Database Commands" on page 3-204 • "ISDP Commands" on page 3-206 Warning: The commands in - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 39
Managed Switch CLI Manual, Release 8.0 interface range This command gives you access to a range of port to to the vlan virtual interface mode, which allows certain port configurations (for example, the IP address) to be applied to the VLAN interface. Type a question mark (?) after entering the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 40
Managed Switch CLI Manual, Release 8.0 Format Mode auto-negotiate Interface Config no auto-negotiate This command disables automatic negotiation on a port. Note: Automatic sensing is disabled when automatic negotiation - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 41
CLI Manual, Release the interface. You can use the mtu command to configure jumbo frame support for physical and port-channel (LAG) interfaces. For the standard 7000 require. To configure the IP MTU size, which is the maximum size of the IP packet (IP Header + IP payload), see "ip mtu" on page 412. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 42
shutdown This command disables a port. Managed Switch CLI Manual, Release 8.0 Note: You can use the shutdown command on physical and port-channel (LAG) interfaces, but not on VLAN routing interfaces. Default Format Mode enabled - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 43
no shutdown all This command enables all ports. Format Mode no shutdown all Global Config Managed Switch CLI Manual, Release 8.0 speed This command sets the speed and duplex setting for the interface. Format Mode speed { } Interface Config Acceptable - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 44
Managed Switch CLI Manual, Release 8.0 show port This command displays port information. Format disabled. The factory default is enabled. The desired port speed and duplex mode. If auto-negotiation support is selected, then the duplex mode and speed is set from the auto-negotiation process. Note - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 45
Managed Switch CLI Manual, Release 8.0 Term Group Name Group ID Protocol(s) VLAN Interface(s) Definition The group name of an entry in the Protocol-based VLAN table. The group identifier - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 46
Managed Switch CLI Manual, Release 8.0 Term Physical Mode Physical Status Link Status Loop Status Partner Flow Control Definition Either "Auto" or fixed speed and duplex mode. The actual speed - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 47
Managed Switch CLI Manual, Release 8.0 Spanning Tree Protocol (STP) Commands This section describes the commands you use to configure Spanning Tree Protocol (STP). STP helps prevent network loops, duplicate - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 48
Managed Switch CLI Manual, Release 8.0 Default Format Mode enabled no spanning-tree bpdufilter default Global Config spanning-tree bpduflood Use this command to enable BPDU Flood on the interface. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 49
Managed Switch CLI Manual, Release 8.0 Default Format Mode disabled no spanning-tree bpduguard Global Config name> is a string of up to 32 characters. Default Format Mode base MAC address in hexadecimal notation spanning-tree configuration name Global Config no spanning-tree configuration - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 50
Managed Switch CLI Manual, Release 8.0 spanning-tree configuration revision This command sets the Configuration Identifier Revision Level for use in identifying the configuration that this switch is currently using. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 51
Managed Switch CLI Manual, Release 8.0 spanning-tree forceversion This command sets the Force Protocol rather than MST BPDUs (IEEE 802.1d functionality supported). • Use 802.1s to specify that the switch transmits MST BPDUs (IEEE 802.1s functionality supported). • Use 802.1w to specify that the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 52
Managed Switch CLI Manual, Release 8.0 no spanning-tree forward-time This command sets the Bridge Forward Delay parameter for the common and internal spanning tree to the default value. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 53
Managed Switch CLI Manual, Release 8.0 no spanning-tree max-age This command sets the Bridge Max Age parameter for the common and internal spanning tree to the default value. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 54
Managed Switch CLI Manual, Release 8.0 If you specify the cost option, the command sets the path cost for this port within a multiple spanning tree instance or the common and - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 55
Managed Switch CLI Manual, Release 8.0 Format Mode no spanning-tree mst - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 56
Managed Switch CLI Manual, Release 8.0 If you specify 0 (defined as the default CIST ID) as the , this command sets the Bridge Priority parameter to a new value for the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 57
Managed Switch CLI Manual, Release 8.0 no spanning-tree mst vlan This command removes an association between a multiple spanning tree instance and one or more VLANs so that the VLAN(s) - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 58
Managed Switch CLI Manual, Release 8.0 no spanning-tree port mode all This command sets the forward Spanning Tree Protocol (STP) BPDU packets if STP is disabled. However, if in some network setup, the user wishes to forward BDPU packets received from other network devices, this command can be used - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 59
Managed Switch CLI Manual, Release 8.0 no spanning-tree bpduforwarding This command will cause the bridge identifier of the root bridge. It is made up from the bridge priority and the base MAC address of the bridge. Root Path Cost Value of the Root Path Cost parameter for the common and internal - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 60
Managed Switch CLI Manual, Release 8.0 Term Definition Root Port Derived value. Bridge Forward Delay Hello the CST Regional Root. It is made up using the bridge priority and the Root base MAC address of the bridge. Regional Root Path Cost to the CST Regional Root. Path Cost Associated FIDs - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 61
Managed Switch CLI Manual, Release 8.0 show spanning-tree interface This command displays the settings and parameters for a specific switch port within the common and internal spanning tree. The - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 62
Managed Switch CLI Manual, Release 8.0 show spanning-tree mst port detailed This command displays the detailed settings and parameters for a specific switch port within a particular multiple spanning tree instance. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 63
Managed Switch CLI Manual, Release 8.0 Term Definition Transitions Into The number of times this interface has transitioned into loop inconsistent state. Loop Inconsistent State Transitions Out of Loop Inconsistent - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 64
Managed Switch CLI Manual, Release 8.0 Term Definition Topology Change Acknowledgem ent Value of flag in next Configuration Bridge Protocol Data Unit (BPDU) transmission indicating if a topology change is in - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 65
Managed Switch CLI Manual, Release 8.0 Term Definition MST Instance ID The MST instance associated with this port. Interface Valid unit, slot, and port number separated by forward slashes. STP - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 66
Managed Switch CLI Manual, Release 8.0 show spanning-tree summary This command displays spanning tree User EXEC Term Definition Spanning Tree Enabled or disabled. Adminmode Spanning Tree Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w, or IEEE 802.1d) based Version upon the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 67
Managed Switch CLI Manual, Release 8.0 Term Definition VLAN Identifier The VLANs associated with the selected MST instance. Associated Instance Identifier for the associated multiple spanning tree instance or "CST" - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 68
Managed Switch CLI Manual, Release 8.0 vlan This command creates a new VLAN and assigns it an ID. The ID is a valid VLAN identification number (ID 1 is reserved for the default - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 69
Managed Switch CLI Manual, Release 8.0 no vlan acceptframe This command resets the frame acceptance mode for the interface to the default value. Format Mode no vlan acceptframe Interface Config - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 70
Managed Switch CLI Manual, Release 8.0 vlan name This command changes the name of a VLAN. The name is an alphanumeric string of up to 32 characters, and the ID is a - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 71
Managed Switch CLI Manual, Release 8.0 vlan participation all This command configures the degree of participation for all interfaces in a VLAN. The ID is a valid VLAN identification number. Format Mode - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 72
Managed Switch CLI Manual, Release 8.0 no vlan port acceptframe all This command sets the frame acceptance mode for all interfaces to Admit All. For Admit All mode, untagged frames - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 73
Managed Switch CLI Manual, Release 8.0 no vlan port pvid all This command sets the VLAN ID for all interfaces to 1. Format Mode no vlan port pvid all Global Config - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 74
Managed Switch CLI Manual, Release 8.0 vlan protocol group add protocol This command adds the command fails and the protocol is not added to the group. The possible values for protocol are ip, arp, and ipx. Default Format Mode none vlan protocol group add protocol - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 75
Managed Switch CLI Manual, Release 8.0 Default Format Mode none protocol group VLAN Config no protocol group This command removes the from this protocol-based VLAN group - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 76
Managed Switch CLI Manual, Release 8.0 protocol vlan group all This command adds all physical interfaces to the protocol-based VLAN identified by . You can associate multiple interfaces with a - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 77
Managed Switch CLI Manual, Release 8.0 vlan tagging This command configures the tagging behavior for a Interface Config vlan association subnet This command associates a VLAN to a specific IP-subnet. Format Mode vlan association subnet VLAN Config no vlan - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 78
Managed Switch CLI Manual, Release 8.0 vlan association mac This command associates a MAC address to a VLAN. Format Mode vlan association mac VLAN database no vlan association mac This command removes the association of a MAC address to a VLAN. Format Mode no vlan - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 79
Managed Switch CLI Manual, Release 8.0 Format Mode show vlan • Privileged EXEC • User EXEC Term VLAN ID VLAN Name VLAN Type Interface Current Configured Tagging Definition There is a VLAN - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 80
Managed Switch CLI Manual, Release 8.0 Format Mode show vlan brief • Privileged EXEC • User EXEC Term VLAN ID VLAN Name VLAN Type Definition There is a VLAN Identifier (vlanid) associated with - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 81
Manual, Release 8.0 Term Definition GVRP May be enabled or disabled. Default Priority The 802.1p priority assigned to tagged packets arriving on the port. show vlan association subnet This command displays the VLAN associated with a specific configured IP-Address and net mask. If no IP address - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 82
Double VLAN Commands Managed Switch CLI Manual, Release 8.0 This section describes the commands you use to configure double VLAN (DVLAN). Double VLAN tagging is a way to pass VLAN traffic from one customer - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 83
Managed Switch CLI Manual, Release 8.0 mode dvlan-tunnel Use this command to enable Double VLAN Tunneling on the specified interface. Note: When you use the mode dvlan-tunnel command on an interface, it becomes a service provider port. Ports that do not have double VLAN tunneling enabled are - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 84
Managed Switch CLI Manual, Release 8.0 Term EtherType Definition A 2-byte hex EtherType to be used as the first . The benefits of using Voice VLAN is to ensure that the sound quality of an IP phone could be safeguarded from deteriorating when the data traffic on the port is high. Switching Commands v1.0, - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 85
components. QoS-based on IEEE 802.1P class of service (CoS) uses classification and scheduling to sent network traffic from the switch in a predictable manner. The system uses the source MAC of the traffic traveling through the port to identify the IP phone data flow. voice vlan (Global Config) Use - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 86
Managed Switch CLI Manual, Release 8.0 Parameter none untagged Description Allow the IP phone to use its own configuration to send untagged voice traffic. Configure the phone to send untagged voice traffic. no voice vlan (Interface Config) Use - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 87
Managed Switch CLI Manual, Release 8.0 . Term Definition Voice VLAN Interface Mode The admin mode of the Voice VLAN on the interface. Voice VLAN ID The Voice VLAN ID Voice - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 88
Protected Ports Commands Managed Switch CLI Manual, Release 8.0 This section describes commands you use to configure and view protected ports on a switch. Protected ports do not forward traffic to each other, even - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 89
Managed Switch CLI Manual, Release 8.0 switchport protected (Interface Config) Use this command to add an interface to a protected port group. The parameter identifies the set of protected ports - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 90
Managed Switch CLI Manual, Release 8.0 Term Definition Name An optional name of the protected port group. The name can be up to 32 alphanumeric characters long, including blanks. The - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 91
Managed Switch CLI Manual, Release 8.0 By default, a port does not belong to any private group. A port cannot be in more than one private group. An error message should return - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 92
Managed Switch CLI Manual, Release 8.0 no private-group name This command is used to remove the specified private group. Format Mode private-group name Global Config show - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 93
Managed Switch CLI Manual, Release 8.0 set garp timer join This command sets the GVRP buffer time for another station to assert registration for the same attribute in order to maintain uninterrupted service. The leave time is 20 to 600 (centiseconds). The value 60 centiseconds is 0.6 seconds. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 94
Managed Switch CLI Manual, Release 8.0 no set garp timer leave This command sets the GVRP leave time on all ports or a single port to the default and only has - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 95
Managed Switch CLI Manual, Release 8.0 Format Mode show garp • Privileged EXEC • User EXEC Term Definition GMRP Admin Mode The administrative mode of GARP Multicast Registration Protocol (GMRP) for the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 96
Managed Switch CLI Manual, Release 8.0 Format Mode no set gvrp adminmode Privileged EXEC set gvrp interfacemode This command enables GVRP on a single port (Interface Config mode) or all ports ( - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 97
Managed Switch CLI Manual, Release 8.0 Term Definition Join Timer Leave Timer LeaveAll Timer group membership information to propagate across all networking devices in the bridged LAN that support Extended Filtering Services. Note: If GMRP is disabled, the system does not forward GMRP messages - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 98
Managed Switch CLI Manual, Release 8.0 Default Format Mode disabled set gmrp adminmode Privileged EXEC no set gmrp adminmode This command disables GARP Multicast Registration Protocol (GMRP) on the system. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 99
Managed Switch CLI Manual, Release 8.0 Format Mode no set gmrp interfacemode • Interface Config • buffer time for another station to assert registration for the same attribute in order to maintain uninterrupted service. There is an instance of this timer on a per-Port, per-GARP participant basis. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 100
Manual, Release 8.0 show mac-address-table gmrp This command displays the GMRP entries in the Multicast Forwarding Database (MFDB) table. Format Mode show mac-address-table gmrp Privileged EXEC Term Mac Address Type Description Interfaces Definition A unicast MAC address network services only - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 101
Managed Switch CLI Manual, Release 8.0 Format Mode clear radius statistics Privileged EXEC dot1x guest-vlan This command configures VLAN as guest vlan on a per port basis. The command specifies an active VLAN as an IEEE 802.1x guest VLAN. The range is 1 to the maximumVLAN ID supported by the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 102
Managed Switch CLI Manual, Release 8.0 dot1x max-req This command sets the users Use this command to set the maximum number of clients supported on the port when MAC-based dot1x authentication is enabled on the port. The maximum users supported per port is dependent on the product. The - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 103
Managed Switch CLI Manual, Release 8.0 dot1x port-control This command sets the authentication mode to use on the specified port. Select forceunauthorized to specify that the authenticator PAE unconditionally - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 104
Managed Switch CLI Manual, Release 8.0 no dot1x port-control all This command sets the authentication mode on all ports to the default value. Format Mode no dot1x port-control - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 105
Managed Switch CLI Manual, Release 8.0 dot1x system-auth-control Use this command to enable the dot1x authentication support on the switch. system-auth-control This command is used to disable the dot1x authentication support on the switch. Format Mode no dot1x system-auth-control Global Config - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 106
Managed Switch CLI Manual, Release 8.0 Tokens Definition supp-timeout server-timeout The value, with that port. The unauthenticated VLAN ID can be a valid VLAN ID from 0-Maximum supported VLAN ID (4093 for 7000 series). The unauthenticated VLAN must be statically configured in the VLAN - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 107
Managed Switch CLI Manual, Release 8.0 Default Format Mode 0 dot1x unauthenticated-vlan Interface Config no dot1x unauthenticated-vlan This command resets the unauthenticated-vlan associated with the port - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 108
Managed Switch CLI Manual, Release 8.0 show authentication methods This command displays information about the authentication methods. Format Mode show authentication methods Privileged EXEC The following is an example of this command: Login Authentication Method Lists Console_Default: None - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 109
Managed Switch CLI Manual, Release 8.0 Term Definition Administrative Mode VLAN Assignment Mode Indicates whether authentication control on the switch is enabled or disabled. Indicates whether assignment of an authorized - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 110
Managed Switch CLI Manual, Release 8.0 Term Definition Backend Current state of the backend authentication state machine. Possible values are Request, Authentication Response, Success, Fail, Timeout, Idle, and Initialize. When - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 111
Managed Switch CLI Manual, Release 8.0 Term Definition Maximum Users The maximum number of clients for that specific port is MACbased. Term Definition Supplicant The MAC-address of the supplicant. MAC-Address Authenticator PAE State Current state of the authenticator PAE state machine. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 112
Managed Switch CLI Manual, Release 8.0 Term Definition Port The interface whose statistics are displayed carried in the most recently received EAPOL frame. Frame Version Last EAPOL The source MAC address carried in the most recently received EAPOL frame. Frame Source EAP Response/ The number of - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 113
Managed Switch CLI Manual, Release 8.0 Format Mode show dot1x clients { | all} used by the client to authenticate to the server. Supplicant MAC The supplicant device MAC address. Address Session Time The time since the supplicant is logged on. Filter ID Identifies the Filter ID - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 114
Storm-Control Commands Managed Switch CLI Manual, Release 8.0 This section describes commands you use to configure story recovery for individual interfaces. Unicast Storm-Control protects against traffic whose MAC addresses are not known by the system. For broadcast, multicast, and unicast storm- - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 115
Managed Switch CLI Manual, Release 8.0 Default Format Mode enabled storm-control broadcast Interface Config no storm-control broadcast Use this command to disable broadcast storm recovery mode for a specific - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 116
Managed Switch CLI Manual, Release 8.0 storm-control broadcast rate Use this command to configure the broadcast storm recovery threshold for an interface in packets per second. If the mode - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 117
Managed Switch CLI Manual, Release 8.0 Format Mode no storm-control broadcast Global Config storm-control broadcast level (Global Config) This command configures the broadcast storm recovery threshold for all - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 118
Managed Switch CLI Manual, Release 8.0 Format Mode storm-control broadcast rate Global Config no storm-control broadcast rate This command sets the broadcast storm recovery threshold to the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 119
Managed Switch CLI Manual, Release 8.0 storm-control multicast level This command configures the multicast storm recovery threshold for an interface as a perecentage of link speed and enables multicast storm - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 120
Managed Switch CLI Manual, Release 8.0 Format Mode no storm-control multicast rate Interface Config storm-control multicast (Global Config) This command enables multicast storm recovery mode for all interfaces. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 121
Managed Switch CLI Manual, Release 8.0 no storm-control multicast level This command sets the multicast storm recovery threshold to the default value for all interfaces and disables multicast storm - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 122
Managed Switch CLI Manual, Release 8.0 Default Format Mode disabled storm-control unicast Interface Config no storm-control unicast This command disables unicast storm recovery mode for an interface. Format - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 123
Managed Switch CLI Manual, Release 8.0 storm-control unicast rate Use this command to configure the unicast storm recovery threshold for an interface in packets per second. If the mode - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 124
Managed Switch CLI Manual, Release 8.0 Format Mode no storm-control unicast Global Config storm-control unicast level (Global Config) This command configures the unicast storm recovery threshold for all - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 125
Managed Switch CLI Manual, Release 8.0 no storm-control unicast rate This command sets the multicast storm recovery threshold to the default value for an interface and disables multicast storm - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 126
Managed Switch CLI Manual, Release 8.0 show storm-control This command displays switch configuration information. If you do not use any of the optional parameters, this command displays global storm - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 127
Managed Switch CLI Manual, Release 8.0 shares traffic based upon the source and destination MAC address.Assign the port-channel (LAG the maximum number of dynamic port-channels (LAGs) that your platform supports, additional port-channels that you configure are automatically static. port-channel This - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 128
Managed Switch CLI Manual, Release 8.0 addport This command adds one port to the port-channel (LAG). The interface is a logical unit/slot/port number or a group ID of a configured - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 129
Managed Switch CLI Manual, Release 8.0 lacp admin key Use this command to configure the administrative value of the key for the port-channel. The value range of is 0 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 130
Managed Switch CLI Manual, Release 8.0 no lacp collector max delay Use this command to configure the default port-channel collector max delay. Format Mode no lacp collector max-delay - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 131
Managed Switch CLI Manual, Release 8.0 lacp actor admin state individual Use this command to set LACP actor admin state to individual. Format Mode lacp actor admin state individual Interface - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 132
Managed Switch CLI Manual, Release 8.0 no lacp actor admin state longtimeout Use this command to set the LACP actor admin state to short timeout. Format Mode no lacp actor - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 133
Managed Switch CLI Manual, Release 8.0 lacp actor port priority Use this command to configure the priority value assigned to the Aggregation Port. The valid range for is 0 to - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 134
Managed Switch CLI Manual, Release 8.0 no lacp actor system priority Use this command to configure the priority value associated with the Actor's SystemID. Format Mode no lacp actor system - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 135
Managed Switch CLI Manual, Release 8.0 Note: This command is only applicable to physical interfaces. no lacp partner admin state individual Use this command to set the LACP partner admin - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 136
Managed Switch CLI Manual, Release 8.0 lacp partner admin state passive Use this command to set the LACP partner admin state to passive. Format Mode lacp partner admin state passive - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 137
Managed Switch CLI Manual, Release 8.0 no lacp partner port id Use this command to set the LACP partner port id to the default. Format Mode no lacp partner portid - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 138
Managed Switch CLI Manual, Release 8.0 lacp partner system id Use this command to configure the 6-octet MAC Address value representing the administrative value of the Aggregation Port's protocol Partner's System ID. The valid range of is 00:00:00:00:00: - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 139
Managed Switch CLI Manual, Release 8.0 Note: This command is only applicable to physical interfaces. no lacp partner system priority Use this command to configure the default administrative value of - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 140
Managed Switch CLI Manual, Release 8.0 port lacpmode This command enables Link Aggregation Control Protocol (LACP) on a port. Default Format Mode enabled port lacpmode Interface Config no port lacpmode This - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 141
Managed Switch CLI Manual, Release 8.0 port lacptimeout (Interface Config) This command sets the timeout on a physical interface of a particular device type (actor or partner) to either long or short - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 142
Managed Switch CLI Manual, Release 8.0 port-channel adminmode This command enables a port-channel (LAG). This command sets every configured port-channel with the same administrative mode setting. Format Mode - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 143
Managed Switch CLI Manual, Release 8.0 hashing-mode This command sets the hashing algorithm , and port ID 2. Destination MAC, VLAN, EtherType, and port ID 3. Source IP and source TCP/UDP port 4. Destination IP and destination TCP/UDP port 5. Source/Destination MAC, VLAN, EtherType and port 6. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 144
Managed Switch CLI Manual, Release 8.0 Load-balancing is not supported on every device. The range of options for load-balancing may vary per device. Default Format IP and Source TCP/UDP fields of the packet Destination IP and Destination TCP/UDP Port fields of the packet Source/Destination IP and - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 145
Managed Switch CLI Manual, Release 8.0 port-channel name This command defines a name for the port-channel (LAG). The interface is a logical unit/slot/port for a configured port-channel, and < - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 146
Managed Switch CLI Manual, Release 8.0 Parameter Admin Key Port Priority Admin State Description The administrative value of the Key. The priority value assigned to the Aggregation Port. The administrative - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 147
Managed Switch CLI Manual, Release 8.0 For each port-channel the following information is displayed: Term Logical Interface Port-channel Name Link-State Trap Flag Type Mbr Ports Active Ports - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 148
Managed Switch CLI Manual, Release 8.0 show port-channel This command displays an overview of all port-channels (LAGs) on the switch. Format Mode show port-channel { - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 149
and all VLANs. Once the port is removed from the VLAN, you must manually add the port to any desired VLANs. Use the source interface - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 150
Managed Switch CLI Manual, Release 8.0 Format Mode no monitor session [{source interface | destination interface | mode}] Global Config no monitor This command - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 151
Managed Switch CLI Manual, Release 8.0 Term Admin Mode Probe Port Mirrored Port Type maximum number of static MAC filters supported is 20. • For multicast MAC address filters with destination ports configured, the maximum number of static filters supported is 256. i.e. For current platforms - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 152
Managed Switch CLI Manual, Release 8.0 • Multicast MAC and source ports and destination ports (max=20) Format Mode macfilter Global Config no macfilter This command removes all filtering restrictions and the static MAC filter entry for the MAC address on the VLAN < - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 153
Managed Switch CLI Manual, Release 8.0 no macfilter adddest This command removes a port from a valid VLAN. Note: Configuring a destination port list is only valid for multicast MAC addresses. Format Mode macfilter adddest all Global Config no macfilter adddest all This - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 154
Managed Switch CLI Manual, Release 8.0 macfilter addsrc This command adds the interface to the source filter set for the MAC filter with the MAC address of and VLAN of . The parameter must be specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5: - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 155
Managed Switch CLI Manual, Release 8.0 The parameter must identify a valid VLAN. Format Mode no macfilter addsrc all Global Config show mac-address-table static This command displays the Static MAC Filtering information for all Static MAC Filters. If you select - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 156
Managed Switch CLI Manual, Release 8.0 Term Mac Address Type Description Interfaces Definition A unicast MAC address for which the switch has forwarding and or filtering information. As the data is gleaned from the MFDB, the address will be a multicast address. The format is 6 or 8 two-digit - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 157
Switch CLI Manual, Release 8.0 Default Format Mode disabled ip dhcp snooping vlan Global Config no ip dhcp snooping vlan Use this command to disable DHCP Snooping on VLANs. Format Mode no ip dhcp snooping vlan Global Config ip dhcp snooping verify mac-address Use this - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 158
Switch CLI Manual, Release 8.0 Default Format Mode local ip dhcp snooping database {local|tftp://hostIP/filename} Global Config ip dhcp snooping ip dhcp snooping binding vlan interface Global Config no ip dhcp snooping binding - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 159
Managed Switch CLI Manual, Release 8.0 Format Mode no ip dhcp snooping binding Global Config ip verify binding Use this command to configure static IP source guard (IPSG) entries. Format Mode ip verify binding vlan interface - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 160
CLI Manual, Release 8.0 Format Mode no ip dhcp snooping limit Interface Config ip dhcp snooping log-invalid Use this command to control the logging DHCP messages filtration by the DHCP Snooping application. Default Format Mode disabled ip dhcp snooping log-invalid Interface Config no ip dhcp - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 161
Managed Switch CLI Manual, Release 8.0 Format Mode no ip dhcp snooping trust Interface Config ip verify source Use this command to configure the IPSG source ID attribute to filter the data traffic in the hardware. Source ID is the combination of IP address and MAC address. Normal command allows - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 162
Managed Switch CLI Manual, Release 8.0 Term Definition Interface The interface for which data 0/4 0/6 Trusted -------- Yes No No No No Log Invalid Pkts No Yes Yes No No show ip dhcp snooping binding Use this command to display the DHCP Snooping binding entries. To restrict the output, use - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 163
Managed Switch CLI Manual, Release 8.0 Term MAC Address IP Address VLAN Interface Type Lease (sec) Definition Displays the MAC address for the binding that was added. The MAC address is the key to the binding database. Displays the valid IP address for the binding rule. The VLAN for the binding - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 164
Manual, Release 8.0 agent url: /10.131.13.79:/sai1.txt write-delay: 5000 show ip dhcp snooping statistics Use this command to list statistics for DHCP Snooping security violations on untrusted ports. Format Mode show ip Server Msgs Rec'd Definition The IP address of the interface in unit/slot - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 165
CLI Manual, Release 8.0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 clear ip dhcp ip verify source Use this command to display the IPSG configurations on all ports. Format Mode show ip verify source • Privileged EXEC • User EXEC Term Interface Definition Interface address - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 166
Managed Switch CLI Manual, Release 8.0 Term Filter Type Definition Is one of two values: • ip-mac: User has configured MAC address filtering on this interface. • ip: Only IP address filtering on this interface. IP Address MAC Address VLAN IP address of the interface If MAC address filtering is - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 167
Managed Switch CLI Manual, Release 8.0 Example: The following shows example CLI display output for the command. (switch) #show ip source binding MAC Address IP Address Type Vlan Interface 00:00:00:00:00:08 1.2.3.4 dhcp-snooping 2 1/0/1 00:00:00:00:00:09 1.2.3.4 dhcp-snooping 3 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 168
Managed Switch CLI Manual, Release 8.0 Format Mode no ip arp inspection vlan vlan-list Global Config ip arp inspection validate Use this command to enable additional validation checks like source-mac validation, destinationmac validation, and ip address validation on the received ARP packets. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 169
Managed Switch CLI Manual, Release 8.0 no ip arp inspection vlan logging Use this command to disable logging of invalid ARP packets on a list of comma-separated VLAN ranges. Format Mode no ip arp inspection vlan vlan-list logging Global Config ip arp inspection trust Use this command to - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 170
Managed Switch CLI Manual, Release 8.0 Default Format Mode 15 pps for rate and 1 second for burst-interval ip arp inspection limit {rate pps [burst interval seconds] | none} Interface Config no ip arp inspection limit Use this command to set the rate limit and burst interval values for an - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 171
Config Managed Switch CLI Manual, Release 8.0 no arp access-list Use this command to delete a configured ARP ACL. Format Mode no arp access-list acl-name Global Config permit ip host mac host Use this command to configure a rule for a valid IP address and MAC address combination used in ARP - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 172
Managed Switch CLI Manual, Release 8.0 show ip arp inspection Use this command to display the Dynamic ARP whether Destination MAC Validation is enabled or disabled. MAC Validation IP Address Validation Displays whether IP Address Validation is enabled or disabled. VLAN The VLAN ID for - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 173
Managed Switch CLI Manual, Release 8.0 show ip arp inspection statistics Use this command to VLAN Forwarded Dropped DHCP Drops ACL Drops DHCP Permits ACL Permits Bad Src MAC Bad Dest MAC Invalid IP Definition The VLAN ID for each displayed row. The total number of valid ARP packets forwarded in - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 174
Manual, Release 8.0 65 25 8 2 1 1 0 0 1 1 clear ip arp inspection statistics Use this command to reset the statistics for Dynamic ARP Inspection on all VLANs. Default Format Mode none clear ip arp inspection statistics Privileged EXEC show ip Format Mode show ip arp inspection - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 175
Managed Switch CLI Manual, Release 8.0 0/2 Untrusted 10 10 show arp access-list Use this configure IGMP snooping. The software supports IGMP Versions 1, 2, and 3. The IGMP snooping feature can help conserve bandwidth because it allows the switch to forward IP multicast traffic only to connected - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 176
Managed Switch CLI Manual, Release 8.0 If an supports the following activities: • Validation of the IP header checksum (as well as the IGMP header checksum) and discarding of the frame upon checksum error. • Maintenance of the forwarding table entries based on the MAC address versus the IP address - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 177
Managed Switch CLI Manual, Release 8.0 set igmp interfacemode This command enables still interested in receiving multicast traffic directed to that group. Also, fast-leave processing is supported only with IGMP version 2 hosts. Default Format Mode disabled set igmp fast-leave Interface Config - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 178
Managed Switch CLI Manual, Release 8.0 no set igmp fast-leave This command disables IGMP Snooping fast-leave admin mode on a selected interface. Format Mode no set igmp fast-leave - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 179
Managed Switch CLI Manual, Release 8.0 set igmp maxresponse This command sets the IGMP Maximum no set igmp maxresponse VLAN Config set igmp mcrtrexpiretime This command sets the Multicast Router Present Expiration time. The time is set for the system, on a particular interface or VLAN - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 180
Managed Switch CLI Manual, Release 8.0 Format Mode Format Mode set igmp mcrtrexpiretime • Global Config • Interface Config set igmp mcrtrexpiretime VLAN Config no set igmp mcrtrexpiretime This command sets the Multicast Router Present Expiration time to 0. The time is - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 181
statically configured multicast router interface. Format Mode no set igmp mrouter interface Interface Config ip igmpsnooping unknown-multicast This command enables the filtering of unknown multicast packets to the VLAN. Packets with an unknown mulicast address - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 182
Managed Switch CLI Manual, Release 8.0 show igmpsnooping This command displays IGMP Snooping information. for a particular group on that interface. This value may be configured. Multicast Router Expiry Time The amount of time to wait before removing an interface from the list of interfaces - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 183
Managed Switch CLI Manual, Release 8.0 When you specify a value for , the following receive a report for a particular group on that interface. This value may be configured. Multicast Router Expiry Time The amount of time to wait before removing an interface that is participating in the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 184
Switch CLI Manual, Release 8.0 Format Mode Term Interface VLAN ID show igmpsnooping mrouter vlan Privileged EXEC Definition The port on which multicast router information is being displayed. The list of VLANs of which the interface is a member. show mac-address-table igmpsnooping - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 185
Managed Switch CLI Manual, Release 8.0 This section describes commands used to configure and display on the VLAN. Note: The Querier IP Address assigned for a VLAN takes preference over global configuration. The IGMP Snooping Querier application supports sending periodic general queries on the VLAN - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 186
Managed Switch CLI Manual, Release 8.0 set igmp querier query-interval Use this command to set the IGMP Querier Query Interval time. It is the amount of time in seconds - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 187
Managed Switch CLI Manual, Release 8.0 set igmp querier version Use this command to set is enabled, if the Snooping Querier finds that the other Querier's source address is better (less) than the Snooping Querier's address, it stops sending periodic queries. If the Snooping Querier wins the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 188
Managed Switch CLI Manual, Release 8.0 show igmpsnooping querier Use this command to display IGMP Admin Version The version of IGMP that will be used while sending out the queries. Querier Address The IP Address which will be used in the IPv4 header while sending out IGMP queries. It can be - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 189
Managed Switch CLI Manual, Release 8.0 Field Last Querier Address Last Querier Version Description Indicates the IP address of the most recent that has MLD Snooping enabled. MLD Snooping supports the following activities: • Validation of address version, payload length consistencies and discarding - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 190
Managed Switch CLI Manual, Release 8.0 Default Format Mode Default Format Mode disabled set mld Global Config Interface Config disabled set mld VLAN Mode no set mld Use this - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 191
Managed Switch CLI Manual, Release 8.0 no set mld interfacemode Use this command were still interested in receiving multicast traffic directed to that group. Note: Fast-leave processing is supported only with MLD version 1 hosts. Default Format Mode Default Format Mode disabled set mld fast-leave - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 192
Managed Switch CLI Manual, Release 8.0 no set mld fast-leave Use this command to disable MLD Snooping fast-leave admin mode on a selected interface. Format Mode Format Mode no - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 193
Managed Switch CLI Manual, Release 8.0 Format Mode no set mld groupmembership-interval • Interface Config • Global Config set mld maxresponse Use this command to set the MLD Maximum Response time - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 194
Managed Switch CLI Manual, Release 8.0 set mld mcrtexpiretime Use this command to set the Multicast Router Present Expiration time. The on an interface before the interface is removed from the list of interfaces with multicast routers attached. The range is 0 to 3600 seconds. A value of 0 indicates - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 195
Managed Switch CLI Manual, Release 8.0 no set mld mrouter Use this command to disable multicast router attached mode for a VLAN with a particular VLAN ID. Format Mode no set mld mrouter Interface Config set mld mrouter interface Use this command to - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 196
Managed Switch CLI Manual, Release 8.0 When the optional arguments or < wait before removing an interface that is participating in the VLAN from the list of interfaces with multicast routers attached. The interface is removed if a query is not received. This value may be configured. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 197
vlan Privileged EXEC Definition Shows the interface on which multicast router information is being displayed. Displays the list of VLANs of which the interface is a member. show mac-address-table mldsnooping Use this command to display the MLD Snooping entries in the Multicast - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 198
Manual, Release 8.0 Term MAC Address Type Description Interfaces Definition A multicast MAC address requires that one central switch or router periodically query all end-devices on can specify the IP address that the snooping querier switch should use as a source address while generating periodic - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 199
Managed Switch CLI Manual, Release 8.0 Format Mode Default Format Mode set mld querier • Global Config disabled set mld querier [] [address ipv6_address] • VLAN Mode no set mld querier Use this command to disable MLD Snooping Querier on the system. Use the optional - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 200
Managed Switch CLI Manual, Release 8.0 set mld querier timer expiry Use this command to is enabled, if the Snooping Querier finds that the other Querier's source address is better (less) than the Snooping Querier's address, it stops sending periodic queries. If the Snooping Querier wins the election - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 201
Managed Switch CLI Manual, Release 8.0 Format Mode no set mld querier election participate - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 202
Managed Switch CLI Manual, Release 8.0 Field Description VLAN Operational Max Response Time Indicates the time to will be used while sending out MLD queriers on this VLAN. Last Querier Address Indicates the IP address of the most recent Querier from which a Query was received. Last Querier - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 203
Managed Switch CLI Manual, Release 8.0 port-security This command enables port locking at the system level ( no port-security max-dynamic This command resets the maximum number of dynamically locked MAC addresses allowed on a specific port to its default value. Format Mode no port-security max - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 204
Managed Switch CLI Manual, Release 8.0 port-security max-static This command sets the maximum number of statically locked MAC addresses allowed on a port. Default Format Mode 20 port-security max-static Interface Config no port-security max-static This command sets maximum number of - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 205
Managed Switch CLI Manual, Release 8.0 port-security mac-address move This command converts dynamically locked MAC addresses to statically locked addresses. Format Mode port-security mac-address move Interface Config show port-security This command displays the port-security settings. If you - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 206
Manual, Release 8.0 Term MAC Address Definition MAC Address of dynamically locked MAC. show port-security static This command displays the statically locked MAC addresses for port. Format Mode show port-security static Privileged EXEC Term MAC Address Definition MAC Address - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 207
Managed Switch CLI Manual, Release 8.0 lldp transmit Use this command to enable the LLDP advertise capability. Default Format Mode enabled lldp transmit Interface Config no lldp transmit Use this - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 208
Managed Switch CLI Manual, Release 8.0 multiplier on the transmit interval that sets the TTL in local data LLDPDUs. The multiplier range is 2-10. The is the delay - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 209
Managed Switch CLI Manual, Release 8.0 no lldp transmit-tlv Use this command to Interface Config lldp transmit-mgmt Use this command to include transmission of the local system management address information in the LLDPDUs. Format Mode lldp transmit-mgmt Interface Config no lldp transmit-mgmt - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 210
lldp notification Use this command to disable notifications. Default Format Mode disabled no lldp notification Interface Config Managed Switch CLI Manual, Release 8.0 lldp notification-interval Use this command to configure how frequently the system sends remote data change notifications. The - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 211
Managed Switch CLI Manual, Release 8.0 clear lldp remote-data Use this command to delete all information from the LLDP remote data table, including MEDrelated information. Format Mode clear lldp - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 212
Managed Switch CLI Manual, Release 8.0 Term Transmit Receive Notify TLVs Mgmt Definition (System Description), or 3 (System Capability). Shows whether the interface transmits system management address information in the LLDPDUs. show lldp statistics Use this command to display the current LLDP - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 213
Managed Switch CLI Manual, Release 8.0 Term Definition Errors The number of invalid LLDP frames ID that is sent by a remote device as part of the LLDP message, it is usually a MAC address of the device. The port number that transmitted the LLDPDU. The system name of the remote device. Example - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 214
Managed Switch CLI Manual, Release 8.0 (switch) #show lldp remote-device all LLDP Remote Device Summary Local Interface RemID Chassis ID 0/1 0/2 0/3 0/4 0/5 0/6 0/7 2 00:FC:E3:90:01:0F 0/7 3 00:FC:E3: - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 215
Managed Switch CLI Manual, Release 8.0 Term Port ID System Name System Description Port Description System Capabilities Supported System Capabilities Enabled Management Address Time To Live Definition The port number that transmitted the LLDPDU. The system name of the remote device. Describes the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 216
Managed Switch CLI Manual, Release 8.0 show lldp local-device Use this command to display summary the system name and versions of hardware, operating system, and networking software supported in the device. Port Description Describes the port in an alpha-numeric format. System Capabilities - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 217
Managed Switch CLI Manual, Release 8.0 Term System Capabilities Enabled Management Address Definition Shows which of the supported system capabilities are enabled. The type of address and the specific address the local LLDP agent uses to send and receive information. LLDP-MED Commands Link Layer - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 218
Managed Switch CLI Manual, Release 8.0 lldp med confignotification Use this command to configure all the ports to send the topology change notification. Default Format Mode enabled lldp med confignotification - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 219
Managed Switch CLI Manual, Release 8.0 no lldp med transmit-tlv Use this command to remove a TLV. Format Mode no lldp med transmit-tlv [capabilities] [network-policy] [ex-pse] [ex- - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 220
Managed Switch CLI Manual, Release 8.0 lldp med faststartrepeatcount Use this command to set the value of the fast start repeat count. [count] is the number of LLDP PDUs that - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 221
Managed Switch CLI Manual, Release 8.0 no lldp med transmit-tlv Use this command to remove a TLV. Format Bridge etc.], Class III Communication [IP Telephone etc.]. Class IV Network Connectivity Device, which is typically a LAN Switch, Router, IEEE 802.11 Wireless Access Point, etc. Example: The - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 222
Managed Switch CLI Manual, Release 8.0 show lldp med interface Use this command to display a summary of the current LLDP MED configuration for a specific interface. indicates a specific - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 223
Managed Switch CLI Manual, Release 8.0 TLV Codes: 0- Capabilities, 1- Network Policy 2- Location, 3- Extended PSE 4- Extended Pd, 5- Inventory --More-- or (q)uit (Switch) #show lldp med interface 1/0/2 Interface Link configMED operMED ConfigNotify - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 224
Managed Switch CLI Manual, Release 8.0 Example: The following shows example CLI display output for the command. (Switch) #show lldp med local-device detail 1/0/8 LLDP MED Local Device Detail Interface: 1/0/8 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 225
Source: local Priority: low Managed Switch CLI Manual, Release 8.0 show lldp med remote-device This Class III Communication [IP Telephone etc]). The fourth device is Network Connectivity Device, which is typically a LAN Switch/Router, IEEE 802.1 Bridge, IEEE 802.11 Wireless Access Point etc - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 226
Managed Switch CLI Manual, Release 8.0 show lldp med remote-device detail Use this command Mode show lldp med remote-device detail Privileged EXEC Term Definition Supported Capabilities Shows the suppoted capabilities that were received in MED TLV on this port. Enabled - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 227
Managed Switch CLI Manual, Release 8.0 Term Sub Type Location Information Device Type Available Source Detail Local Interface: 1/0/8 Remote Identifier: 18 Capabilities MED Capabilities Supported: capabilities, networkpolicy, location, extendedpse MED Capabilities Enabled: capabilities, - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 228
to configure Denial of Service (DoS) Control. The software provides support for classifying and blocking specific types of Denial of Service attacks. You can configure your system to monitor and block these types of attacks: • SIP=DIP: Source IP address = Destination IP address. • First Fragment:TCP - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 229
. Format Mode no dos-control all Global Config dos-control sipdip This command enables Source IP address = Destination IP address (SIP=DIP) Denial of Service protection. If the mode is enabled, Denial of Service prevention is active for this type of attack. If packets ingress with SIP=DIP, the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 230
Manual, Release 8.0 dos-control firstfrag This command enables Minimum TCP Header Size Denial of Service protection. If the mode is enabled, Denial of Service Service protection. If the mode is enabled, Denial of Service prevention is active for this type of attack. If packets ingress having IP - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 231
Managed Switch CLI Manual, Release 8.0 dos-control tcpflag This command enables TCP Flag Denial of Service protections. If the mode is enabled, Denial of Service prevention is active for this type of attacks. If packets ingress having TCP Flag SYN set and a source port less than 1024 or having TCP - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 232
Mode no dos-control icmp Global Config dos-control smacdmac This command enables Source MAC address = Destination MAC address (SMAC=DMAC) Denial of Service protection. If the mode is enabled, Denial of Service prevention is active for this type of attack. If packets ingress with SMAC=DMAC, the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 233
Managed Switch CLI Manual, Release 8.0 no dos-control smacdmac This command disables Source MAC address = Destination MAC address (SMAC=DMAC) Denial of Service protection. This command is only available on FSM72xxRS switches. Format Mode no dos-control smacdmac Global Config dos-control tcpport - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 234
Managed Switch CLI Manual, Release 8.0 Default Format Mode disabled dos-control udppport Global Config no dos-control udpport This command disables UDP L4 source = destination port number (Source UDP Port =Destination UDP Port) Denial of Service protection. This command is only available on - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 235
Managed Switch CLI Manual, Release 8.0 dos-control tcpoffset This command enables TCP Offset Denial of Service protection. If the mode is enabled, Denial of Service prevention is active for this type of attack. If packets ingress having TCP Header Offset equal to one (1), the packets will be - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 236
Managed Switch CLI Manual, Release 8.0 Format Mode no dos-control tcpsyn Global Config dos-control tcpsynfin This command enables TCP SYN and FIN Denial of Service protection. If the mode is enabled, Denial of Service prevention is active for this type of attack. If packets ingress having TCP - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 237
Managed Switch CLI Manual, Release 8.0 Format Mode dos-control tcpfinurgpsh Global Config no dos-control tcpfinurgpsh This command sets disables TCP FIN and URG and PSH and SEQ=0 checking Denial of Service protections. This command is only available on FSM72xxRS switches. dos-control icmpv4 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 238
Managed Switch CLI Manual, Release 8.0 dos-control icmpv6 This command enables Maximum ICMPv6 Packet Size Denial of Service protections. If the mode is enabled, Denial of Service prevention is active for this type of attack. If ICMPv6 Echo Request (PING) packets ingress having a size greater than - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 239
Managed Switch CLI Manual, Release 8.0 Format Mode no dos-control icmpfrag Global Config show dos-control This command displays Denial of Service configuration information. Format Mode show dos-control Privileged EXEC Note: Not all messages below are available in all 7000series managed - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 240
Managed Switch CLI Manual, Release 8.0 Term Definition TCP FIN&URG& May be enabled or disabled. view information about the MAC databases. bridge aging-time This command configures the forwarding database address aging timeout in seconds. The parameter must be within the range of 10 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 241
Managed Switch CLI Manual, Release 8.0 show forwardingdb agetime This command displays the timeout for address aging. Default Format Mode all show forwardingdb agetime Privileged EXEC Term Definition Address Aging • This parameter displays the address aging timeout for the associated - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 242
Managed Switch CLI Manual, Release 8.0 show mac-address-table stats This command displays the Multicast Forwarding Database (MFDB) statistics. Format Mode show mac-address-table stats Privileged EXEC Term Definition Max MFDB Table Entries The total number of entries that can possibly be in - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 243
Managed Switch CLI Manual, Release 8.0 isdp holdtime This command configures the hold time for ISDP packets that the switch transmits. The hold time specifies how long a receiving device should - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 244
isdp enable This command enables ISDP on the interface. Default Format Mode Enabled isdp enable Interface Config Managed Switch CLI Manual, Release 8.0 no isdp enable This command disables ISDP on the interface. Format Mode no isdp enable Interface Config clear isdp counters This command - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 245
Managed Switch CLI Manual, Release 8.0 Term Definition Timer The frequency with which this device serial number. • macAddress indicates that the value is in the form of a Layer 2 MAC address. • other indicates that the value is in the form of a platform specific ASCII string containing info - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 246
Managed Switch CLI Manual, Release 8.0 show isdp entry This command displays ISDP entries. If the device id is specified, then only entries for that device are shown. Format Mode show isdp entry {all | deviceid} Privileged EXEC Term Definition Device ID IP Addresses Platform Interface Port ID - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 247
Managed Switch CLI Manual, Release 8.0 Term Definition Port ID Hold Time neighbors detail Device ID Address(es): IP Address: Capability Platform Interface Port ID Holdtime Advertisement Version Entry last changed time Version : 0001f45f1bc0 10.27.7.57 Router Trans Bridge Switch IGMP - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 248
Managed Switch CLI Manual, Release 8.0 Term Definition ISDPv2 Packets Transmitted Total number the table due to a full database ISDP IP Address Table Full Displays the number of times a neighbor entry was added to the table without an IP address. debug isdp packet This command enables tracing - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 249
available in the 7000 series CLI. The Routing Commands chapter contains the following sections: • "Address Resolution Protocol (ARP) Commands" on page 4-1 • "IP Routing Commands" on page 4-8 • "Router Discovery Protocol Commands" on page 4-20 • "Virtual LAN Routing Commands" on page 4-24 • "Virtual - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 250
device. Format Mode no arp Global Config ip proxy-arp This command enables proxy ARP on a router interface. Without proxy ARP, a device only responds to an ARP request if the target IP address is an address configured on the interface where the ARP request arrived. With - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 251
Managed Switch CLI Manual, Release 8.0 no ip proxy-arp This command disables proxy ARP on a router interface. Format Mode no ip proxy-arp Interface Config arp cachesize This command configures the ARP cache size. The ARP cache size value is a platform specific integer value. The default - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 252
Managed Switch CLI Manual, Release 8.0 arp purge This command causes the specified IP address to be removed from the ARP cache. timeout. The value for is a valid positive integer, which represents the IP ARP entry response timeout time in seconds. The range for is between 1-10 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 253
Manual, Release 8.0 no arp retries This command configures the default ARP count of maximum request for retries. Format Mode no arp retries Global Config arp timeout This command configures the ARP entry ageout time. The value for is a valid positive integer, which represents the IP - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 254
Managed Switch CLI Manual, Release 8.0 clear arp-switch Use this command to clear the contents of the switch's Address Resolution Protocol (ARP Max The following are displayed for each ARP entry: Term IP Address Definition The IP address of a device on a subnet attached to an existing routing interface. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 255
Managed Switch CLI Manual, Release 8.0 Term MAC Address Interface Type Age Definition The hardware MAC address of that device in hh:mm:ss format ) show arp brief This command displays the brief Address Resolution Protocol (ARP) table information. Format Mode show arp brief Privileged EXEC Term - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 256
Managed Switch CLI Manual, Release 8.0 Term IP Address MAC Address Interface Definition The IP address of a device on a subnet attached to the switch. The hardware MAC address of that device. The routing unit/slot/port associated with the device's ARP entry. IP Routing Commands This section - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 257
CLI Manual, Release 8.0 no ip routing This command disables the IP Router Admin Mode for the master switch. Format Mode no ip routing Global Config ip address This command configures an IP address on an interface. You can also use this command to configure one or more secondary IP addresses on - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 258
Managed Switch CLI Manual, Release 8.0 entered into the forwarding database. By ip route [{ [] | Null0}] Global Config ip route default This command configures the default route. The value for is a valid IP address of the next hop router - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 259
Managed Switch CLI Manual, Release 8.0 no ip route default This command deletes all configured default routes. If value in the router. Lower route preference values are preferred when determining the best route. Format Mode no ip route distance Global Config ip netdirbcast This command - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 260
MTUs, they will not form an adjacency. (unless OSPF has been instructed to ignore differences in IP MTU with the ip ospf mtu-ignore command.) Note: The IP MTU size refers to the maximum size of the IP packet (IP Header + IP payload). It does not include any extra bytes that may be required for Layer - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 261
Managed Switch CLI Manual, Release 8.0 no ip mtu This command resets the ip mtu to the default value. Format Mode no ip mtu Interface Config encapsulation This command configures the link layer encapsulation type for the packet. The encapsulation type can be ethernet or snap. Default - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 262
Managed Switch CLI Manual, Release 8.0 Format Modes show ip brief • Privileged EXEC • User EXEC Term Definition Default Time to Live Routing Mode The computed TTL (Time to Live) of forwarding a packet from the local router to the final destination. Shows whether the routing mode is enabled or - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 263
for the interface. This value appears only if you configure it. Helper IP Address The helper IP addresses configured by the "ip helper-address (Global Config)command. Routing Mode The administrative mode of router interface participation. The possible values are enable or disable. This value is - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 264
Enabled ICMP Redirects Enabled show ip interface brief This command displays summary information about IP configuration settings for all ports in the router. Format Modes show ip interface brief • Privileged EXEC • User EXEC Term Interface State IP Address IP Mask Netdir Bcast MultiCast Fwd - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 265
Switch CLI Manual, Release 8.0 prefixes keyword, the and pair becomes the prefix, and the command displays the routes to the addresses that this route. via Next-Hop The outgoing router IP address to use when forwarding traffic to the next router (if any) in the path toward the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 266
Manual, Release 8.0 To administratively control the traffic destined to a particular network and prevent it from being forwarded through the router, you can configure a static reject route on the router supported in both OSPFv2 and OSPFv3. The following shows . Format Modes show ip route summary [all - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 267
preference values are preferred over higher router preference values. A route with a preference of 255 cannot be used to forward traffic. Format Modes show ip route preferences • Privileged EXEC • User EXEC Term Local Static OSPF Intra OSPF Inter OSPF External RIP Definition The local route - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 268
a host to discover the IP address of routers on the subnet. ip irdp This command enables Router Discovery on an interface. Default Format Mode disabled ip irdp Interface Config no ip irdp This command disables Router Discovery on an interface. Format Mode no ip irdp Interface Config Routing - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 269
Managed Switch CLI Manual, Release 8.0 ip irdp address This command configures the address that the interface uses to send the router discovery advertisements. The valid values for are 224.0.0.1, which is the all-hosts IP multicast address, and 255.255.255.255, which is the limited - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 270
Managed Switch CLI Manual, Release 8.0 ip irdp maxadvertinterval This command configures the maximum time, in seconds, allowed between sending router advertisements from the interface. The range for maxadvertinterval is 4 to 1800 seconds. Default Format Mode 600 ip irdp maxadvertinterval - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 271
CLI Manual, Release 8.0 ip irdp preference This command configures the preferability of the address as a default router address, relative to other router addresses on the same subnet. Default Format Mode 0 ip irdp preference Interface Config no ip irdp preference - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 272
information for all VLANs with routing enabled. Format Modes show ip vlan • Privileged EXEC • User EXEC Term Definition MAC Address The MAC Address associated with the internal bridge-router interface (IBRI). The same used by Routing MAC Address is used by all VLAN routing interfaces. It will - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 273
Manual, Release 8.0 Term Definition VLAN ID The identifier of the VLAN. Logical Interface The logical unit/slot/port associated with the VLAN routing interface. IP Address The IP address associated with this VLAN. Subnet Mask The subnet mask that is associated with this VLAN. Virtual Router - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 274
Managed Switch CLI Manual, Release 8.0 ip vrrp (Interface Config) Use this command in Interface Config mode to create a virtual router associated with the interface. The parameter is the virtual router ID, which has an integer value range from 1 to 255. Format Mode ip vrrp - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 275
Managed Switch CLI Manual, Release 8.0 ip vrrp ip This command sets the virtual router IP address value for an interface. The value for is the IP address which is to be configured on that interface for VRRP. The parameter is the virtual router ID which has an integer value range - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 276
in the group higher than the master's priority, the router will take over as master only if preempt mode is enabled. Default Format Mode 100 unless the router is the address owner, in which case its priority is automatically set to 255. ip vrrp priority Interface Config Routing - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 277
Managed Switch CLI Manual, Release 8.0 no ip vrrp priority This command sets the default priority value for the virtual router configured on a specified interface. Format Mode no ip vrrp priority Interface Config ip vrrp timers advertise This command sets the frequency, in seconds, that - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 278
Managed Switch CLI Manual, Release 8.0 The default priority of the virtual router is 100, and the default decrement using the argument. Default Format Mode priority: 10 ip vrrp track ip route [decrement ] Interface Config Routing Commands - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 279
value if the route is not reachable. Format Mode no ip vrrp track ip route [decrement] Interface Config show ip vrrp interface stats This command displays the statistical information about each virtual router configured on the switch. Format Modes show - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 280
Manual, Release 8.0 Term Definition Invalid Type Packets Received Address List Errors Invalid Authentication Type Authentication Type Mismatch The total number of VRRP packets received by the virtual router length of VRRP Errors header. show ip vrrp This command displays whether VRRP - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 281
• Privileged EXEC • User EXEC Term Definition Primary IP Address The configured IP address for the Virtual router. VMAC address Authentication type The VMAC address of the specified router. The authentication type for the specific virtual router. Priority The priority value for the specific - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 282
, slot, and port number separated by forward slashes. The router ID of the virtual router. The virtual router IP address. Indicates whether the virtual router is enabled or disabled. The state (Master/backup) of the virtual router. DHCP and BOOTP Relay Commands This section describes the commands - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 283
Managed Switch CLI Manual, Release 8.0 no bootpdhcprelay cidoptmode This command disables the circuit ID option mode for BootP/DHCP Relay on the system. Format Mode no bootpdhcprelay cidoptmode Global - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 284
Managed Switch CLI Manual, Release 8.0 no bootpdhcprelay minwaittime This command configures the (Seconds) Admin Mode Indicates whether relaying of requests is enabled or disabled. Server IP Address The IP address for the BootP/DHCP Relay server. Circuit Id Option The DHCP circuit Id option - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 285
port number to forward. If not specified, packets for the default services are forwarded to the helper address. Valid range, 0-65535. Default Format Mode Disabled ip helper-address {|dhcp|domain|isakmp|mobile-ip|nameserver| netbios-dgm|netbios-ns|ntp|pim-auto-rip|rip|tacacs - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 286
be applied multiple times on the routing interface to form the helper addresses list until the list reaches the maximum supported helper addresses. Format Mode ip helper-address {|dhcp|domain|isakmp|mobile-ip|nameserver| netbios-dgm|netbios-ns|ntp|pim-auto-rip|rip|tacacs|tftp - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 287
-address 1/0/1 Helper IP Address 1.2.3.4 1.2.3.5 Open Shortest Path First (OSPF) Commands This section describes the commands you use to view and configure OSPF, which is a link-state routing protocol that you use to route traffic within a network. router ospf Use this command to enter Router - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 288
command to enable OSPFv2 on an interface and set its area ID if the IP address of an interface is covered by this network command. Default Format Mode disabled network area Router OSPF Config no network area (OSPF) Use this command to disable the OSPFv2 on - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 289
Managed Switch CLI Manual, Release 8.0 ip ospf area Use this command to enable OSPFv2 and set the area ID of an interface. The is an IP address formatted as a 4-digit dotted-decimal number or a decimal value in the range of . This command supersedes the effects of the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 290
Managed Switch CLI Manual, Release 8.0 area default-cost (OSPF) This command configures the default cost for the stub area. You must specify the area ID and an integer value between 1-16777215. Format Mode area default-cost Router OSPF Config area nssa (OSPF) This command - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 291
Managed Switch CLI Manual, Release 8.0 no area nssa default-info-originate (OSPF) This command disables the default route advertised into the NSSA. Format Mode no area nssa default-info-originate [] [{comparable | non-comparable}] Router OSPF Config area nssa no-redistribute ( - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 292
Managed Switch CLI Manual, Release 8.0 area nssa translator-role (OSPF) This command configures the translator role of the NSSA. A value of always causes the router to assume the role of the translator the instant it becomes a border router and a value of candidate causes the router to participate - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 293
CLI Manual, Release 8.0 area range (OSPF) This command creates a specified area range for a specified NSSA. The is a valid IP address. > is a valid IP address. The is a valid subnet mask. Format Mode no area range Router OSPF Config area stub - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 294
Managed Switch CLI Manual, Release 8.0 area stub no-summary (OSPF) This command configures the Summary LSA mode for the stub area identified by . Use this command to prevent LSA Summaries from being sent. Default Format Mode disabled area stub no-summary Router OSPF Config no - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 295
Managed Switch CLI Manual, Release 8.0 area virtual-link authentication This command configures the authentication type and key for the OSPF virtual interface identified by and . The parameter is the Router ID of the neighbor. The value for is either none, - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 296
Managed Switch CLI Manual, Release 8.0 no area virtual-link dead-interval This command configures the default dead interval for the OSPF virtual interface on the virtual interface identified by and . The parameter is the Router ID of the neighbor. Format Mode no - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 297
Managed Switch CLI Manual, Release 8.0 no area virtual-link retransmit-interval This command configures the default retransmit interval for the OSPF virtual interface on the virtual interface identified by and . The parameter is the Router ID of the neighbor. Format - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 298
Managed Switch CLI Manual, Release 8.0 Use the auto-cost command to change the reference bandwidth, to set the reference bandwidth to the default value. Format Mode no auto-cost reference-bandwidth Router OSPF Config bandwidth By default, OSPF computes the link cost of an interface as the ratio - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 299
CLI Manual, Release 8.0 capability opaque Use this command to enable Opaque Capability on the Router. The information contained in Opaque LSAs may be used directly by OSPF or indirectly by an application wishing to distribute information throughout the OSPF domain. The 7000 series supports the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 300
Manual, Release 8.0 Format Mode clear ip ospf counters Privileged EXEC clear ip ospf neighbor Use this command to drop the adjacency with all OSPF neighbors. On each neighbor's interface, send a one-way hello. Adjacencies may then be re-established. To drop all adjacencies with a specific router - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 301
Managed Switch CLI Manual, Release 8.0 default-information originate (OSPF) This command is used to control the advertisement of default routes. Default Format Mode • metric-unspecified • type-2 default-information originate [always] [metric ] [metrictype {1 | 2}] Router OSPF Config - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 302
Managed Switch CLI Manual, Release 8.0 distance ospf (OSPF) This command sets the route preference value of OSPF in the router. Lower route Format Mode no distance ospf {intra-area | inter-area | external} Router OSPF Config distribute-list out (OSPF) Use this command to specify the access - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 303
Managed Switch CLI Manual, Release 8.0 exit-overflow-interval (OSPF) This command configures the exit overflow interval for OSPF. It describes the number of seconds after entering overflow state that a router will wait before attempting to leave the overflow state. This allows the router to again - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 304
Managed Switch CLI Manual, Release 8.0 ip ospf authentication This command sets the OSPF Authentication Type default OSPF Authentication Type for the specified interface. Format Mode no ip ospf authentication Interface Config ip ospf cost This command configures the cost on an OSPF interface. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 305
Managed Switch CLI Manual, Release 8.0 ip ospf dead-interval This command sets the OSPF dead interval for the specified interface. The value for is a valid positive integer, which represents the length of time in seconds that a router's Hello packets have not been seen before its - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 306
Managed Switch CLI Manual, Release 8.0 ip ospf network Use this command to configure OSPF to network type to the default. Format Mode no ip ospf network Interface Config ip ospf priority This command sets the OSPF priority for the specified router interface. The priority of the interface is a - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 307
Managed Switch CLI Manual, Release 8.0 no ip ospf priority This command sets the default OSPF priority for the specified router interface. Format Mode no ip ospf priority Interface Config ip ospf retransmit-interval This command sets the OSPF retransmit Interval for the specified interface. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 308
Manual, Release 8.0 no ip ospf transmit-delay This command sets the default OSPF Transit Delay for the specified interface. Format Mode no ip ospf transmit-delay Interface Config ip of the largest IP packet that can be sent without fragmentation on the interface. When a router receives a - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 309
Managed Switch CLI Manual, Release 8.0 redistribute (OSPF) This command configures OSPF protocol to allow redistribution of routes from the specified source protocol/routers. Default Format Mode • metric-unspecified • type-2 • tag-0 redistribute {rip | static | connected} [metric ] [ - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 310
Manual, Release 8.0 passive-interface default (OSPF) Use this command to enable global passive mode by default for all interfaces. It overrides any interface level passive mode. OSPF will not form adjacencies over a passive interface. Default Format Mode disabled passive-interface default Router - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 311
Managed Switch CLI Manual, Release 8.0 timers spf Use this command to configure the SPF delay time and hold time. The valid range for both parameters is 0-65535 seconds. Default Format Mode • delay-time-5 • hold-time-10 timers spf Router OSPF Config trapflags (OSPF) - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 312
Managed Switch CLI Manual, Release 8.0 • To enable all the flags, give the command as trapflags all | if-state-change | neighbor-state-change | virtifstatechange | virtneighbor-state-change} } Mode Router OSPF Config no trapflags Use this command to revert to the default reference bandwidth. • To - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 313
Managed Switch CLI Manual, Release 8.0 Format Mode no trapflags { all | errors {all | authentication-failure | bad- virtneighbor-state-change} } Router OSPF Config show ip ospf This command displays information relevant to the OSPF router. Format Mode show ip ospf Privileged EXEC Note: Some - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 314
Switch CLI Manual, Release 8.0 Term Definition External LSDB The maximum number of non-default AS-external-LSA (link state advertisement) entries Limit that can be stored in the link-state database. Exit Overflow The number of seconds that, after entering overflow state, a router will attempt - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 315
Managed Switch CLI Manual, Release 8.0 Term Definition Maximum The maximum number of least one interface up. AutoCost Ref Shows the value of auto-cost reference bandwidth configured on the router. BW Maximum Paths The maximum number of paths that OSPF can report for a given destination. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 316
Managed Switch CLI Manual, Release 8.0 (Switch) #show ip ospf Router ID 2.2.2.2 OSPF Admin Mode Disable RFC 1583 (3 normal, 0 stub, 0 nssa) ABR Status Disable ASBR Status Disable Stub Router FALSE External LSDB Overflow FALSE External LSA Count 0 External LSA Checksum 0 AS_OPAQUE LSA - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 317
Managed Switch CLI Manual, Release 8.0 show ip ospf abr This command displays the internal OSPF routing table entries to Area Border Routers (ABR). This command takes no options. Format Mode show ip ospf abr • Privileged EXEC • User EXEC Term Type Router ID Cost Area ID Next Hop Next Hop Intf - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 318
Managed Switch CLI Manual, Release 8.0 Term Definition Area LSA Checksum A number representing the Area LSA Checksum status has been deposed by another router. Translator State Shows whether the ABR translator state is disabled, always, or elected. show ip ospf asbr This command displays the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 319
Manual, Release 8.0 Term Type Router ID Cost Area ID Next Hop Next Hop Intf Definition The type of the route to the destination. It can be one of the following values: intra - Intra-area route inter - Inter-area route Router router interface to use when forwarding traffic to the next hop. show ip - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 320
Switch CLI Manual, Release 8.0 The information below is only displayed if OSPF is enabled. Format Mode show ip ospf [] database [{database-summary | [{asbr-summary | external | network | nssa-external | opaque-area | opaque-as | opaque-link | router | summary}] [{adv-router [ - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 321
Managed Switch CLI Manual, Release 8.0 Term Opaque Link Opaque Area Subtotal Opaque AS of the IP address for the OSPF interface. The secondary IP addresses if any are configured on the interface. OSPF Admin Mode OSPF Area ID States whether OSPF is enabled or disabled on a router interface. The - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 322
Manual, Release 8.0 Term Definition Metric Cost Passive Status OSPF MTUignore The cost of the OSPF interface. Shows whether the interface is passive or not. Indicates whether to ignore MTU mismatches in database descriptor packets sent from neighboring routers Format Mode show ip ospf interface - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 323
Managed Switch CLI Manual, Release 8.0 Term Definition Hello Interval A number representing routers reachable within this area. Router Count Area LSA Count The total number of link-state advertisements in this area's link-state database, excluding AS External LSAs. IP Address The IP address - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 324
CLI Manual, IP address for that neighbor. Note: Does not apply to Hellos. Invalid OSPF Packet Type The number of OSPF packets discarded because the packet type field in the OSPF header is not a known type. Hellos Ignored The number of received Hello packets that were ignored by this router - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 325
for all neighbors or the neighbor associated with the interface that you specify: Term Router ID Priority IP Address Neighbor Interface Definition The 4-digit dotted-decimal number of the neighbor router. The OSPF priority for the specified interface. The priority of an interface is a priority - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 326
number separated by forward slashes. The IP address of the neighbor router. The interface ID of the neighbor router. The area ID of the OSPF area associated with the interface. Options An integer value that indicates the optional OSPF capabilities supported by the neighbor. The neighbor's optional - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 327
interface. The following shows example CLI display output for the command. (Switch) #show ip ospf neighbor 170.1.1.50 Interface 0/17 Neighbor IP Address 170.1.1.50 Interface Index 17 Area Id 0.0.0.2 Options 0x2 Router Priority 1 Dead timer due in (secs 15 Up Time 0 days 2 hrs 8 mins 46 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 328
Manual, Release 8.0 show ip are as follows: • R - a router LSA has changed • N - a ip ospf stub table • Privileged EXEC • User EXEC Term Definition Area ID A 32-bit identifier for the created stub area. Type of Service The type of service associated with the stub metric. Switch CLI only supports - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 329
Manual, Release 8.0 Term Definition Metric Val The metric value is applied based on the TOS. It defaults to the least metric of the type of service area and the parameter identifies the neighbor's Router ID. Format Modes show ip ospf virtual-link • Privileged - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 330
Manual, Release 8.0 show ip ospf virtual-link brief This command displays the OSPF Virtual Interface information for all areas in the system. Format Modes show ip within a small network. router rip Use this command to enter Router RIP mode. Format Mode router rip Global Config enable ( - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 331
Switch CLI Manual, Release 8.0 no enable (RIP) This command sets the administrative mode of RIP in the router to inactive. Format Mode no enable Router RIP Config ip rip This command enables RIP on a router interface. Default Format Mode disabled ip rip Interface Config no ip rip This - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 332
Managed Switch CLI Manual, Release 8.0 default-information originate (RIP) This command is used to control the advertisement of default routes. Format Mode default-information originate Router RIP Config no default-information originate (RIP) This command is used to control the advertisement - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 333
Manual, Release 8.0 no distance rip This command sets the default route preference value of RIP in the router. Format Mode no distance rip Router distribute-list out {ospf | static | connected} Router RIP Config ip rip authentication This command sets the RIP Version 2 Authentication - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 334
Managed Switch CLI Manual, Release 8.0 no ip rip authentication This command sets the default RIP Version 2 Authentication Type for an interface. Format Mode no ip rip authentication Interface Config ip rip receive version This command configures the interface to allow RIP control packets of - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 335
Config split-horizon This command sets the RIP split horizon mode. Split horizon is a technique for avoiding problems caused by including routes in updates sent to the router from which the route was originally learned. The options are: None - no special processing for this case. Simple - a route - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 336
Manual, Release 8.0 Format Mode split-horizon {none | simple | poison} Router RIP Config no split-horizon This command sets the default RIP split horizon mode. Format Mode no split-horizon Router [metric ] other source protocol Mode Router RIP Config no redistribute This command de- - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 337
Managed Switch CLI Manual, Release 8.0 show ip rip This command displays information relevant to the RIP router. Format Modes show ip rip • Privileged per interface (i.e., ip rip). Format Modes show ip rip interface brief • Privileged EXEC • User EXEC Term Interface IP Address Send Version - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 338
Manual, Release 8.0 Term Definition Receive Version The RIP version(s) allowed when receiving updates from the specified interface. The types are none, RIP-1, RIP-2, Both RIP Mode The administrative mode of router is a configured value. IP Address The IP source address used by the specified - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 339
Manual, Release 8.0 This section describes the commands you use to configure options for the transmission of various types of ICMP messages. ip Mode no ip unreachables Interface Config ip redirects Use this command to enable the generation of ICMP Redirect messages by the router. By default - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 340
CLI Manual, Release 8.0 Format Mode no ip redirects • Global Config • Interface Config ip icmp echo-reply Use this command to enable the generation of ICMP Echo Reply messages by the router. By default, the generation of ICMP Echo Reply messages is enabled. Default Format Mode enable ip icmp - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 341
Managed Switch CLI Manual, Release 8.0 no ip icmp error-interval Use the no form of the command to return burst-interval and burst-size to their default values. Format Mode no ip icmp error-interval Global Config Routing Commands v1.0, July 2009 4-93 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 342
commands available in the managed switch CLI. The IP Multicast Commands chapter contains the following sections: • "Multicast Commands" on page 5-1 • "DVMRP This section describes the commands you use to configure IP Multicast and to view IP Multicast settings and statistics. 5-1 v1.0, July 2009 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 343
is applicable. is a group IP address and is a group IP mask. Format Mode no ip mcast boundary Interface Config ip multicast This command sets the administrative mode of the IP multicast forwarder in the router to active. Default Format Mode disabled - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 344
Managed Switch CLI Manual, Release 8.0 ip multicast ttl-threshold This command is specific to IPv4. Use this command to entries allowed in the multicast table. The multicast protocol running on the router. Possible values are PIMDM, PIMSM, or DVMRP. IP Multicast Commands 5-3 v1.0, July 2009 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 345
{ | all} • Privileged EXEC • User EXEC Term Interface Group Ip Mask Definition Valid unit, slot, and port number separated by forward slashes. The group IP address. The group IP mask. show ip mcast interface This command displays the multicast information for the specified - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 346
Manual, Release 8.0 show ip mcast mroute This command displays a summary or all the details of the multicast table. Format Modes show ip . The IP address of the routers, and expiration times of all the entries in the multicast mroute table containing the given . Format Modes show ip - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 347
, incoming and outgoing interfaces, RPF neighboring routers, and expiration times of all the entries in the multicast mroute table containing the given source IP address or source IP address and group IP address pair. Format Modes show ip mcast mroute source {summary | detail - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 348
Managed Switch CLI Manual, Release 8.0 Term Protocol Incoming Interface Outgoing router to active. Default Format Mode disabled ip dvmrp Global Config no ip dvmrp(Global Config) This command sets administrative mode of DVMRP in the router to inactive. Format Mode no ip dvmrp Global Config ip - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 349
Managed Switch CLI Manual, Release 8.0 no ip dvmrp metric This command resets the metric for an interface to the default value. This value is used in the DVMRP messages as the cost to reach this network. Format Mode no ip dvmrp metric Interface Config ip dvmrp trapflags This command enables - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 350
Managed Switch CLI Manual, Release 8.0 show ip dvmrp This command displays the system-wide information for DVMRP. Format Modes show ip dvmrp • Privileged EXEC • User interface. This is a configured value. Local Address The IP address of the interface. IP Multicast Commands 5-9 v1.0, July 2009 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 351
EXEC Term Definition IfIndex The value of the interface used to reach the neighbor. Nbr IP Addr State The IP address of the DVMRP neighbor for which this entry contains information. The state of the neighboring router. The possible value for this field are ACTIVE or DOWN. Up Time The time - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 352
This command displays the table listing the router's upstream prune information. Format Modes show ip dvmrp prune • Privileged EXEC • User EXEC Term Group IP Source IP Source Mask Expiry Time (secs) Definition The multicast Address that is pruned. The IP address of the source that has pruned - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 353
CLI Manual, Release 8.0 show ip dvmrp route This command displays the multicast routing information for DVMRP. Format Modes show ip dvmrp route • Privileged EXEC • User EXEC Term Definition Source Address The multicast address of the source group. Source Mask Upstream Neighbor The IP Mask - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 354
Managed Switch CLI Manual, Release 8.0 no ip pimdm (Global Config) This command disables the administrative mode of PIM-DM in the router. Format Mode no ip pimdm Global Config ip pimdm (Interface Config) This command sets administrative mode of PIM-DM on an interface to enabled. Default - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 355
Managed Switch CLI Manual, Release 8.0 no ip pimdm hello-interval This command resets the transmission frequency of hello messages between PIM enabled neighbors to the default value. Format Mode no ip pimdm hello-interval Interface Config show ip pimdm This command displays the system-wide - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 356
count for the PIM-DM interface. The time interval between two hello messages sent from the router on the given interface. The IP address of the Designated Router for this interface. show ip pimdm neighbor This command displays the neighbor information for PIM-DM on the specified interface. Format - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 357
SM Commands Managed Switch CLI Manual, Release 8.0 This section router. Default Format Mode disabled ip pimsm Global Config no ip pimsm(Global Config) This command is used to administratively disable PIM-SM multicast routing mode on the router. Format Mode no ip pimsm Global Config ip - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 358
Switch CLI Manual, Release 8.0 no ip pimsm(Interface Config) This command is used to administratively disable PIM-SM multicast routing mode on a particular router interface. Format Mode no ip pimsm Interface Config ip pimsm bsr-border Use this command to prevent bootstrap router (BSR) messages - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 359
the priority values are the same, the router with the larger IP address is the BSR. The default value is 0. no ip pimsm bsr-candidate This command is used to disable the router to announce its candidacy as a bootstrap router (BSR). Format Mode no ip pimsm bsr-candidate interface - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 360
to set the hello interval to the default value. Format Mode no ip pimsm hello-interval Interface Config ip pimsm join-prune-interval This command is used to configure the interface join/prune interval for the PIM-SM router. The join/prune interval is specified in seconds. This parameter can be - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 361
Format Mode no ip pimsm register-threshold Global Config ip pimsm rp-address This command is used to statically configure the RP address for one or more multicast groups. The parameter is the IP address of the RP. The parameter is the group address supported by the RP - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 362
Switch CLI Manual, Release 8.0 ip pimsm rp-candidate This command is used to configure the router to advertise itself as a PIM candidate rendezvous point (RP) to the bootstrap router (BSR). Default Format Mode None ip pimsm rp-candidate interface - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 363
Managed Switch CLI Manual, Release 8.0 ip pimsm ssm Use this command to define the Source Specific Multicast (SSM) range of IP multicast addresses. Default Format Mode disabled ip pimsm ssm {default | } Global Config Parameter default-range Description Defines the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 364
configured candidate rendezvous point (RP) advertisement. Format Mode show ip pimsm bsr • Privileged EXEC • User EXEC Term BSR Address Uptime BSR Priority Hash Mask Length Definition IP address of the BSR. Length of time that this router has been up (in hours, minutes, and seconds). Priority - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 365
Managed Switch CLI Manual, Release 8.0 Term Definition Next Bootstrap Time (in hours, minutes, interface. Designated Router The IP address of the Designated Router for this interface. DR Priority The priority of the Designated Router. BSR Border The bootstrap router border interface. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 366
Designated Router 41.1.1.2 DR Priority 1 BSR Border Disabled show ip pimsm neighbor This command displays the neighbor information for PIM-SM on the specified interface. Format Modes show ip pimsm neighbor { | all} • Privileged EXEC • User EXEC Term Interface IP Address Up - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 367
Manual, Release 8.0 show ip pimsm rp mapping Use this command to display all group-to-RP mappings of which the router is a aware (either configured or learned from the bootstrap router (BSR)). If no RP is specified, all active RPs are displayed. Format Modes show ip pimsm rp mapping [rp address - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 368
This command resets the version of IGMP to the default value. Format Modes no ip igmp version Interface Config ip igmp last-member-query-count This command sets the number of Group-Specific Queries sent before the router assumes that there are no local members on the interface. The range for - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 369
Managed Switch CLI Manual, Release 8.0 ip igmp last-member-query-interval This second. Default Format Modes 10 tenths of a second (1 second) ip igmp last-member-query-interval Interface Config no ip igmp last-member-query-interval This command resets the Maximum Response Time - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 370
Managed Switch CLI Manual, Release 8.0 ip igmp query-max-response-time This command configures the time interval is reset to the default time. Format Mode no ip igmp query-max-response-time Interface Config ip igmp robustness This command configures the robustness that allows tuning of the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 371
CLI Manual, Release 8.0 ip igmp startup-query-count This command sets the number of Queries sent out on startup, separated by the Startup Query Interval on the interface. The range for is 1 to 20. Default Format Mode 2 ip igmp startup-query-count Interface Config no ip igmp - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 372
Switch CLI Manual, Release 8.0 show ip igmp This command displays the system-wide IGMP information. Format Modes show ip igmp • use the detail keyword, the following fields appear: Term Definition IP Address The IP address of the interface participating in the multicast group. Subnet Mask - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 373
Manual, Release 8.0 If you use the detail keyword, the following fields appear: Term Multicast IP Address Last Reporter Up Time Expiry Time Version1 Host Timer Version2 Host Timer Group Compatibility Mode Definition The IP address be configured to create a router capable of running either IGMP - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 374
CLI Manual, Release Group-Specific Queries sent before the router assumes that there are no local members. show ip igmp interface membership This command unit, slot and port number separated by forward slashes. The IP address of the interface participating in the multicast group. The interface - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 375
• Privileged EXEC • User EXEC Term Definition Querier Status The status of the IGMP router, whether it is running in Querier mode or Non-Querier mode. Querier IP Address The IP address of the IGMP Querier on the IP subnet to which this interface is attached. Querier Up Time The time since the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 376
. With IGMP Proxy enabled, the system acts as proxy to all the hosts residing on its router interfaces. ip igmp-proxy This command enables the IGMP Proxy on the router. To enable the IGMP Proxy on the router, you must enable multicast forwarding. Also, make sure that there are no multicast routing - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 377
Manual, Release 8.0 no ip igmp-proxy unsolicit-rprt-interval This command resets the unsolicited report interval of the IGMP Proxy router to the default value. Format Mode no ip igmp-proxy unsolicit-rprt-interval Interface Config ip Report Interval Querier IP Address on Proxy Interface The - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 378
Managed Switch CLI Manual, Release 8.0 Term Definition Older Version 1 The interval used to timeout the older Mode Enable Version 3 Num of Multicast Groups 0 Unsolicited Report Interval 1 Querier IP Address on Proxy Interface........ 5.5.5.50 Older Version 1 Querier Timeout 0 Older Version 2 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 379
Managed Switch CLI Manual, Release 8.0 Term Report Rcvd Report Sent Leaves Rcvd Leaves Term Definition Interface The interface number of the IGMP Proxy. Group Address The IP address of the multicast group. Last Reporter The IP address of host that last sent a membership report for the current - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 380
Managed Switch CLI Manual, Release 8.0 Term Sources Definition The number of sources attached to the multicast group. Example: The following shows example CLI display output for the command. (Switch) #show ip igmp-proxy groups Interface Index 1/0/1 Group Address 225.4.4.4 Last Reporter Up - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 381
Managed Switch CLI Manual, Release 8.0 Term Filter Mode Sources Group Source List Expiry Time Definition Possible values are Include or Exclude. The number of sources attached to the multicast group. The list of IP addresses of the sources attached to the multicast group. Time left before a source - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 382
must purchase a separate software license. Note: The commands in this chapter require an optional software license for use on the GSM7328Sv1 and GSM7352Sv1. Note: There is no specific IP multicast enable for IPv6. Enabling of multicast at global config is common for both IPv4 and IPv6. This chapter - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 383
Multicast Forwarder Managed Switch CLI Manual, Release 8.0 show ipv6 mroute Note: There is no specific IP multicast enable for IPv6. entry in seconds. The time elapsed since the entry was created in seconds. The IP address of the RPF neighbor. The flags associated with this entry. If you use the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 384
Managed Switch CLI Manual, Release 8.0 Term Outgoing Interface List Definition The list of interfaces, RPF neighboring routers, and expiration times of all the entries in the multicast mroute table containing the given source IP address or source IP address and group IP address pair. Format Modes - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 385
Manual, Release 8.0 If you use the detail parameter, the command displays the following column headings in the output table: Term Source IP Group IP Expiry Time Up Time RPF Neighbor Flags Definition The IP address of the multicast data source. The IP address seconds. The IP address of the support - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 386
Managed Switch CLI Manual, Release 8.0 no ipv6 pimdm Default Format Mode disabled ipv6 pimdm • Global Config • Interface Config Use this command to administratively disable PIM-DM Multicast Routing Mode either across the router (Global Config) or on a particular router (Interface Config). - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 387
pimdm • Privileged EXEC • User EXEC Managed Switch CLI Manual, Release 8.0 Term Definition Admin Mode Indicates whether PIM-DM • User EXEC Term Interface Neighbor Address Definition Valid unit, slot, and port number separated by forward slashes. The IP address of the neighbor on an interface. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 388
Managed Switch CLI Manual, Release 8.0 Term Up Time Expiry Time Definition The Slot/Port 0/1 IP Address 1.1.1.1 Subnet Mask 255.255.255.0 Hello Interval (secs 30 secs Neighbor count 3 Designated Router Not Supported (Switch) #show ipv6 pimdm interface Address Interface --------- ------- - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 389
Managed Switch CLI Manual, Release 8.0 10.1.37.2 --------- 0/24 1 30 IPv6 PIM-SM Commands This section describes the PIM-SM commands you use to configure Protocol Independent Multicast - Sparse Mode (PIM-SM) in IPv6. ipv6 pimsm bsr-border Use this command to prevent bootstrap router (BSR - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 390
Switch CLI Manual, Release 8.0 Parameters hash-masklength priority Description Length of a mask (32 bits maximum) that is to be ANDed with the group address before . If the priority values are the same, the router with the larger IP address is the BSR. The default value is 0. no ipv6 pimsm bsr - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 391
Managed Switch CLI Manual, Release 8.0 Default Format Mode 30 ipv6 pimsm hello-interval - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 392
for one or more multicast groups. The parameter is the IP address of the RP. The parameter is the group address supported by the RP. The parameter is the group mask for the group address. The optional keyword override indicates that if there is a conflict - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 393
Switch CLI Manual, Release 8.0 ipv6 pimsm rp-candidate This command is used to configure the router to advertise itself as a PIM candidate rendezvous point (RP) to the bootstrap router (BSR). Default Format Mode None ipv6 pimsm rp-candidate interface - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 394
Managed Switch CLI Manual, Release 8.0 ipv6 pimsm ssm Use this command to define the Source Specific Multicast (SSM) range of IP multicast addresses. Default Format Mode disabled ipv6 pimsm ssm {default | } Global Config Parameter default Description - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 395
Managed Switch CLI Manual, Release 8.0 Term Definition PIM-SM Interface Status Interface Valid unit, bsr • Privileged EXEC • User EXEC Term Definition BSR Address Uptime BSR Priority IP address of the BSR. Length of time that this router has been up (in hours, minutes, and seconds). - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 396
Managed Switch CLI Manual, Release 8.0 show ipv6 pimsm interface This command displays interface SM interface. Designated Router The IP address of the Designated Router for this interface. DR Priority The priority of the Designated Router. BSR Border The bootstrap router border interface. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 397
IP address of the RP for the group specified. Indicates the mechanism (BSR or static) by which the RP was selected. show ipv6 pimsm rp mapping Use this command to display all group-to-RP mappings of which the router However some network setup does not need a multicast router as multicast traffic - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 398
Manual, Release 8.0 Default Format Mode Disabled ipv6 mld router Global Config Interface Config no ipv6 mld router Use this command, in the administrative mode of the router, to disable MLD in the router. Default Format Mode Disabled no ipv6 mld router sent when the router is the querier on - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 399
Managed Switch CLI Manual, Release 8.0 ipv6 mld query-max-response-time Use this command to set the MLD querier's maximum response time for the interface and this value is - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 400
CLI Manual, Release 8.0 ipv6 mld last-member-query-count Use this command to set the number of listener-specific queries sent before the router assumes is specified. Field Description Group Address The address of the multicast group. Interface Interface through which the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 401
Manual, Release 8.0 When is specified, the following fields are displayed for each multicast group and each interface. Field Description Interface Interface through which the multicast group is reachable. Group Address The address of the multicast group. Last Reporter The IP - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 402
Managed Switch CLI Manual, Release 8.0 Up Time (hh:mm:ss 00:02:53 Expiry Time (hh:mm:ss Filter Mode Include Version1 Host Timer Group compat mode v2 Source Address ExpiryTime 2003::10 00:04:17 2003::20 00:04:17 show ipv6 mld interface Use this command to display MLD-related - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 403
Manual, Release 8.0 Field Last Member Query Count Description This value indicates the configured number of Group-Specific Queries sent before the router or non-querier on the subnet it is associated with. Querier Address The IP address of the MLD querier on the subnet the interface is associated - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 404
Managed Switch CLI Manual, Release 8.0 Field Description Reports Received Reports Sent Leaves Received The number of valid MLD reports received by the router. The number of valid MLD reports sent by the router. The number of valid MLD leaves received by the router. Leaves Sent The number of - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 405
Managed Switch CLI Manual, Release 8.0 ipv6 mld-proxy unsolicit-rprt-interval Use this command to set the unsolicited report interval for the MLD-Proxy router. This command is only valid when you enable MLD-Proxy on the interface. The value of is 1-260 seconds. Default Format Mode 1 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 406
Managed Switch CLI Manual, Release 8.0 Field Interface Index Admin Mode Operational Mode Version Number of Multicast Groups Unsolicited Report Interval Querier IP Address on Proxy Interface Older Version 1 Querier Timeout Proxy Start Frequency Description The interface number of the MLD-Proxy. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 407
Managed Switch CLI Manual, Release 8.0 Term Definition Interface Index The unit/slot/port of proxy groups • Privileged EXEC • User EXEC Field Interface Group Address Description The interface number of the MLD-Proxy. The IP address of the multicast group. IPv6 Multicast Commands v1.0, July - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 408
Switch CLI Manual, Release 8.0 Field Last Reporter Up Time (in secs) Member State Filter Mode Sources Description The IP address of the host (Switch) #show ipv6 mld-proxy groups Interface Index 1/0/3 Group Address Sources FF1E::1 Last Reporter Up Time Member State Filter Mode FE80 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 409
Managed Switch CLI Manual, Release 8.0 Field Interface Group Address Last Reporter Up Time (in secs) Member State Filter Mode Sources Group Source List Expiry Time Description The interface number of the MLD-Proxy. The IP address of the multicast group. The IP address of the host that last sent a - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 410
Managed Switch CLI Manual, Release 8.0 FF1E::3 FE80::100:2.3 328 DELAY_MEMBER Exclude 0 FF1E::4 FE80::100:2.3 255 DELAY_MEMBER Include 4 Group Source List 4001::1 5002::2 4001::2 5002::2 Expiry Time 00:03:40 00:03:40 00:03:40 00:03:40 IPv6 Multicast Commands v1.0, July 2009 6-29 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 411
GSM7352Sv1 you must purchase a separate software license. Note: The commands in this chapter require an optional software license for use on the GSM7328Sv1 and GSM7352Sv1. Note: The commands in this chapter are in one of three functional groups: This chapter contains the following sections: • "IPv6 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 412
Commands Managed Switch CLI Manual, Release 8.0 IPv6 Management commands allow a device to be managed via an IPv6 address in a switch or IPv4 routing (i.e., independent from the IPv6 Routing package). For Routing/IPv6 builds of Switch CLI dual IPv4/IPv6 operation over the service port is enabled - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 413
this command to configure IPv6 gateway (i.e. default routers) information for the network port. Format Mode network ipv6 gateway Privileged EXEC Parameter gatewayaddress Description Gateway address in IPv6 global or link-local address format. no network ipv6 gateway Use this - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 414
Address MAC Address isRtr Neighbor State Age Updated The IPv6 address of the interface. The MAC Address used. Specifies the router flag the ping utility enabled and running on top of TCP/IP. The switch can be pinged from any IP workstation with which the switch is connected through the default - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 415
CLI Manual, Release 8.0 You can utilize the ping or traceroute facilities over the service/network ports when using an IPv6 global address . Any IPv6 global address or gateway assignments to these interfaces will cause IPv6 routes to be installed within the IP stack - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 416
, infer the endpoint of the tunnel from the destination address of packets routed into the tunnel. To assign an IP address to the tunnel interface, see "ip address" on page 4-9. To assign an IPv6 address to the tunnel interface, see "ipv6 address" on page 7-12. interface tunnel Use this command to - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 417
Managed Switch CLI Manual, Release 8.0 tunnel source This command specifies the source transport address of the tunnel, either explicitly or by reference to an interface. Format Mode tunnel source { | ethernet } Interface Config tunnel destination This command - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 418
packets. The loopback interface is typically used by routing protocols. To assign an IP address to the loopback interface, see "ip address" on page 4-9. To assign an IPv6 address to the loopback interface, see "ipv6 address" on page 7-12. interface loopback Use this command to enter the Interface - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 419
Managed Switch CLI Manual, Release 8.0 no interface loopback This command removes the loopback appears: Term Definition Interface Link Shows whether the link is up or down. Status IP Address The IPv4 address of the interface. IPv6 is enabled Shows whether IPv6 is enabled on the interface. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 420
Managed Switch CLI Manual, Release 8.0 Term IPv6 Prefix is MTU size Definition The IPv6 address of the interface. The maximum in ipv6 packets originated by the node. The value is also included in router advertisements. Valid values for are 1-255 inclusive. The default "not configured" - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 421
Managed Switch CLI Manual, Release 8.0 Format Mode ipv6 hop-limit Global Config no ipv6 , that has not been configured with an explicit IPv6 address. When you use this command, the interface is automatically configured with a link-local address. You do not need to use this command if you - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 422
Managed Switch CLI Manual, Release 8.0 no ipv6 enable Use this command to disable IPv6 routing on an interface. Format Mode no ipv6 enable Interface Config ipv6 address Use this command to configure an IPv6 address on an interface, including tunnel and loopback interfaces, and to enable IPv6 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 423
Managed Switch CLI Manual, Release 8.0 no ipv6 address Use this command to remove all IPv6 addresses on an interface or specified IPv6 address. The parameter consists of the bits of the address to be configured. The designates how many of the high-order contiguous bits of - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 424
Managed Switch CLI Manual, Release 8.0 Format Mode no ipv6 route / [{ | Null0 | interface { - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 425
Managed Switch CLI Manual, Release 8.0 Default Format Mode 0 or link speed (MTU value (1500)) dad attempts Interface Config ipv6 nd managed-config-flag This command sets the "managed address configuration" flag in router advertisements. When the value is true, end nodes use DHCPv6. When the value - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 426
Managed Switch CLI Manual, Release 8.0 Default Format Mode false ipv6 nd managed-config-flag Interface Config no ipv6 nd managed-config-flag This command resets the "managed address configuration" flag in router advertisements to the default value. Format Mode no ipv6 nd managed-config-flag - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 427
Managed Switch CLI Manual, Release 8.0 Default Format Mode false ipv6 nd other-config-flag Interface Config no ipv6 nd other-config-flag This command resets the "other stateful configuration" flag back to its default value in router advertisements sent from the interface. Format Mode no ipv6 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 428
Managed Switch CLI Manual, Release 8.0 Default Format Mode 1800 ipv6 nd ra-lifetime Interface Config no ipv6 nd ra-lifetime This command resets router lifetime to the default value. Format Mode no ipv6 nd ra-lifetime Interface Config ipv6 nd reachable-time This command sets the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 429
Managed Switch CLI Manual, Release 8.0 Format Mode ipv6 nd suppress-ra Interface Config no ipv6 nd suppress-ra This command enables router transmission on an interface. Format Mode no ipv6 nd suppress-ra Interface Config ipv6 unreachables Use this command to enable the generation of ICMPv6 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 430
Managed Switch CLI Manual, Release 8.0 To disable ICMP rate limiting, set burst-interval to zero (0). Default Format Mode • burst-interval of 1000 msec. • burst-size of 100 messages ipv6 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 431
Managed Switch CLI Manual, Release 8.0 Example: The following shows example CLI display output for information displays for all configured IPv6 interfaces: Term Interface IPv6 Routing Operational Mode IPv6 Address/ Length Definition The interface in unit/slot/port format. Shows whether the mode is - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 432
Switch CLI Manual, Release 8.0 Term Definition Administrative Shows whether the interface administrative mode is enabled or disabled. Mode Bandwidth Shows bandwidth of the interface. Interface Maximum Transmission Unit The MTU size, in bytes. Router Duplicate Address Detection Transmits - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 433
Switch CLI Manual, Release 8.0 Routing Mode Disabled Administrative Mode Enabled IPv6 Routing Operational Mode Disabled Bandwidth 100000 kbps Interface Maximum Transmit Unit 1500 Router Duplicate Address Detection Transmits... 1 Router Advertisement NS Interval 0 Router Advertisement Lifetime - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 434
Managed Switch CLI Manual, Release 8.0 Term Definition IPv6 Address MAC Address IsRtr Neighbor State Last Updated IPV6 address of neighbor or interface. Link-layer Address. Shows whether the neighbor is a router. If the value is TRUE, the neighbor is known to be a router, and FALSE otherwise. A - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 435
Managed Switch CLI Manual, Release 8.0 Format Modes show ipv6 route [{ [] | {{ - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 436
Managed Switch CLI Manual, Release 8.0 Example: The following shows example CLI display output for the command. (Switch) #show ipv6 route IPv6 Routing Table - 3 entries Codes: C - connected, S - static O - OSPF Intra, - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 437
Managed Switch CLI Manual, Release 8.0 show ipv6 route summary This command displays the summary of the routing table. Use all to display the count summary for all routes, including - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 438
Managed Switch CLI Manual, Release 8.0 show ipv6 vlan This command displays IPv6 VLAN routing interface addresses. Format Modes show ipv6 vlan • Privileged EXEC • User EXEC Term Definition MAC Address Shows the MAC address. used by Routing VLANs The rest of the output for this command is - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 439
's destination field was not a valid address to be received at this entity. Address This count includes invalid addresses (for example, ::0) and unsupported addresses (for example, addresses with unallocated prefixes). Forentities which are not IPv6 routers and therefore do not forward datagrams - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 440
CLI Manual, . In entities which do not act as IPv6 routers, this counter will include only those packets which output IPv6 datagrams for which no problem was encountered to prevent their transmission the interface to which the ICMP messages were addressed which may not be necessarily the input - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 441
Managed Switch CLI Manual, Release 8.0 Term Definition ICMPv6 Time Exceeded Number of ICMP Time Exceeded messages received by the interface. Messages ICMPv6 Parameter Problem Messages Number of ICMP Parameter Problem messages received by the interface. ICMPv6 messages with Number of ICMP - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 442
Managed Switch CLI Manual, Release 8.0 Term Definition ICMPv6 Parameter Problem Messages Transmitted Number of ICMP Parameter Problem messages sent by Membership Reduction Messages Received ICMPv6 Duplicate Address Detects Number of duplicate addresses detected by the interface. clear ipv6 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 443
Managed Switch CLI Manual, Release 8.0 Format Mode clear ipv6 statistics [{ | loopback < ospf areaid This command sets the OSPF area to which the specified router interface belongs. The is an IPv6 address, formatted as a 4-digit dotted-decimal number or a decimal value - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 444
Managed Switch CLI Manual, Release 8.0 ipv6 ospf cost This command configures the cost on an integer, which represents the length of time in seconds that a router's Hello packets have not been seen before its neighbor routers declare that the router is down. The value for the length of time must be - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 445
transmission unit (MTU) mismatch detection. OSPF Database Description packets specify the size of the largest IP packet that can be sent without fragmentation on the interface. When a router receives a Database Description packet, it examines the MTU advertised by the neighbor. By default, if - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 446
Manual, Release 8.0 ipv6 ospf network This command changes the default OSPF network type for the interface. Normally, the network type is determined from the physical IP large bandwidth IP network between two routers, the network type can be pointto-point since there are only two routers. Using - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 447
Managed Switch CLI Manual, Release 8.0 Format Mode no ipv6 ospf priority Interface the number of seconds between link-state advertisement retransmissions for adjacencies belonging to this router interface. This value is also used when retransmitting database description and link-state request - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 448
Switch CLI Manual, Release 8.0 no ipv6 ospf transmit-delay This command sets the default OSPF Transit Delay for the specified interface. Format Mode no ipv6 ospf transmit-delay Interface Config ipv6 router ospf Use this command to enter Router OSPFv3 Config mode. Format Mode ipv6 router ospf - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 449
Managed Switch CLI Manual, Release 8.0 area nssa default-info-originate (OSPFv3) This command configures routes will not be redistributed to the NSSA. Format Mode area nssa no-redistribute Router OSPFv3 Config no area nssa no-redistribute (OSPFv3) This command disables the NSSA ABR so - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 450
Managed Switch CLI Manual, Release 8.0 area nssa no-summary (OSPFv3) This command configures the NSSA so that summary LSAs are not advertised into the NSSA. Format Mode area nssa no-summary Router OSPFv3 Config no area nssa no-summary (OSPFv3) This command disables nssa from the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 451
Managed Switch CLI Manual, Release 8.0 Format Mode area nssa translator-stab-intv Router OSPFv3 Config no is a valid IP address. The is a valid subnet mask. Format Mode no area range Router OSPFv3 Config area - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 452
Managed Switch CLI Manual, Release 8.0 Format Mode area stub Router OSPFv3 Config no area stub(OSPFv3) This command deletes a stub area for the specified area ID. Format Mode no area stub Router OSPFv3 Config area stub no-summary (OSPFv3) This command disables the import of - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 453
CLI Manual, Release 8.0 no area virtual-link(OSPFv3) This command deletes the OSPF virtual interface from the given interface, identified by and . The parameter is the Router ID of the neighbor. Format Mode no area virtual-link Router OSPFv3 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 454
Managed Switch CLI Manual, Release 8.0 no area virtual-link hello-interval(OSPFv3) This command configures the default hello interval for the OSPF virtual interface on the virtual interface identified by and . The parameter is the Router ID of the neighbor. Format - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 455
Mode Managed Switch CLI Manual, Release 8.0 area virtual-link transmit-delay Router OSPFv3 Config no area Default Format Mode 100Mbps auto-cost reference-bandwidth Router OSPFv3 Config no auto-cost reference-bandwidth (OSPFv3) Use this command - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 456
Managed Switch CLI Manual, Release 8.0 Format Mode no auto-cost reference-bandwidth Router OSPFv3 Config clear ipv6 ospf then be re-established. To drop all adjacencies with a specific router ID, specify the neighbor's Router ID using the optional parameter [neighbor-id]. Format Mode clear - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 457
Managed Switch CLI Manual, Release 8.0 clear ipv6 ospf neighbor interface To drop adjacency with all neighbors on a specific interface, use the optional parameter [unit/slot/ port]. To drop adjacency with a specific router ID on a specific interface, use the optional parameter [neighbor-id]. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 458
Managed Switch CLI Manual, Release 8.0 default-metric (OSPFv3) This command is used to set a default for the metric of distributed routes. Format Mode default-metric Router OSPFv3 Config no default-metric (OSPFv3) This command is used to set a default for the metric of distributed - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 459
Managed Switch CLI Manual, Release 8.0 enable (OSPFv3) This command resets the default administrative mode of OSPF in the router (active). Default Format Mode enabled enable Router OSPFv3 Config no enable (OSPFv3) This command sets the administrative mode of OSPF in the router to inactive. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 460
Switch CLI Manual, Release 8.0 external-lsdb-limit (OSPFv3) This command configures the external LSDB limit for OSPF. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches the external LSDB limit, the router enters - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 461
Managed Switch CLI Manual, Release 8.0 passive-interface default (OSPFv3) Use this command to enable configured to be passive reverts to non-passive mode. Format Mode no passive-interface default Router OSPFv3 Config passive-interface (OSPFv3) Use this command to set the interface or tunnel as - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 462
Managed Switch CLI Manual, Release 8.0 redistribute (OSPFv3) This command configures the OSPFv3 protocol to allow redistribution of routes from the specified source protocol/routers. Default Format Mode • metric-unspecified • type-2 • tag-0 redistribute {static | connected} [metric ] - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 463
Managed Switch CLI Manual, Release 8.0 Group errors if-rx lsa overflow retransmit rtb state-change Table 2: Trapflag Groups (OSPFv3) Flags • authentication-failure • bad-packet • config-error • virt-authentication-failure • - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 464
Managed Switch CLI Manual, Release 8.0 Default Format Mode disabled trapflags { all | errors {all | | if-state-change | neighbor-state-change | virtifstatechange | virtneighbor-state-change} } Router OSPFv3 Config no trapflags(OSPFv3) Use this command to revert to the default reference bandwidth - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 465
Managed Switch CLI Manual, Release 8.0 show ipv6 ospf This command displays information relevant to the OSPF router. Format Mode show ipv6 ospf Privileged EXEC Note: Some of the information below displays only if you enable OSPF and configure certain features. Term Definition Router ID OSPF - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 466
Managed Switch CLI Manual, Release 8.0 Term Definition New LSAs Originated The one interface up. AutoCost Ref Shows the value of the auto-cost reference bandwidth configured on the router. BW Maximum Paths The maximum number of paths that OSPF can report for a given destination. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 467
Managed Switch CLI Manual, Release 8.0 Term Source Metric Metric Type Tag Subnets Distribute-List to the destination. It can be either: • intra - Intra-area route • inter - Inter-area route Router ID of the destination. Cost of using this route. The area ID of the area from which this route - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 468
Managed Switch CLI Manual, Release 8.0 Format Modes show ipv6 ospf area • Privileged EXEC • area's link-state database. Area Border The total number of area border routers reachable within this area. Router Count Area LSA Count Total number of link-state advertisements in this area's - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 469
Managed Switch CLI Manual, Release 8.0 Term Definition Default Metric The metric type for the route to the destination. It can be either: • intra - Intra-area route • inter - Inter-area route Router ID of the destination. Cost of using this route. The area ID of the area from which this route is - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 470
Managed Switch CLI Manual, Release 8.0 display the link LSAs. Use network to display the network LSAs. Use nssa-external to display NSSA external LSAs. Use prefix to display intra-area Prefix LSAs. Use router to display router LSAs. Use unknown area, unknown as, or unknown link to display unknown - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 471
Managed Switch CLI Manual, Release 8.0 Term Definition Router Total number of router LSAs in the OSPFv3 • Privileged EXEC • User EXEC Term Definition IPv6 Address ifIndex OSPF Admin Mode OSPF Area ID Router Priority The IPv6 address of the interface. The interface index number associated - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 472
Managed Switch CLI Manual, Release 8.0 Term Definition Retransmit Interval Hello Interval designated router, and backup designated router. Designated Router The router ID representing the designated router. Backup Designated Router The router ID representing the backup designated router. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 473
Manual, Release 8.0 Format Modes show ipv6 ospf interface brief • Privileged EXEC • User EXEC Term Definition Interface Admin Mode Area ID Router OSPFv3 Area ID The area id of this OSPF interface. IPv6 Address The IP address associated with this OSPF interface. OSPFv3 The number of times the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 474
CLI Manual, IP address for that neighbor. NOTE: Does not apply to Hellos. Invalid OSPF Packet Type The number of OSPF packets discarded because the packet type field in the OSPF header is not a known type. Hellos Ignored The number of received Hello packets that were ignored by this router - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 475
Manual, Release 8.0 show ipv6 ospf neighbor This command displays information about OSPF neighbors. If you do not specify a neighbor IP address, IP address, a table with the following columns displays for all neighbors or the neighbor associated with the interface that you specify: Term Router - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 476
Managed Switch CLI Manual, Release 8.0 If you specify an IP address for the neighbor router, the following fields display: Term Definition Interface The interface of the local router in unit/slot/port format. Area ID The area ID associated with the interface. Options An integer value that - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 477
CLI Manual, Release stub area. Type of Service Type of service associated with the stub metric. For this release, Normal TOS is the only supported type. Metric Val The the area and the parameter identifies the neighbor's Router ID. Format Modes show ipv6 ospf virtual-link - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 478
Managed Switch CLI Manual, Release 8.0 Term Definition Dead Interval Iftransit Delay Interval Retransmit The OSPF Interface States are: down, loopback, waiting, point-to-point, designated router, and backup designated router. This is the state of the OSPF interface. The neighbor state. show ipv6 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 479
Managed Switch CLI Manual, Release 8.0 service dhcpv6 This command enables DHCPv6 configuration on the router. Default Format Mode disabled service dhcpv6 Global Config no service dhcpv6 This command disables DHCPv6 configuration on router. Format Mode no service dhcpv6 Global Config ipv6 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 480
Option allows for various sub-options to be attached to messages that are being relayed by the local router to a relay server. The relay server may in turn use this information in determining an address to assign to a DHCPv6 client. Default Format Mode 32 ipv6 dhcp relay-agent-info-opt - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 481
Managed Switch CLI Manual, Release 8.0 ipv6 dhcp pool Use this command from Global which is provided to DHCPv6 client by DHCPv6 server. DNS domain name is configured for stateless server support. Domain name consist of no more than 31 alpha-numeric characters. DHCPv6 pool can have multiple number - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 482
Managed Switch CLI Manual, Release 8.0 dns-server (IPv6) This command sets the ipv6 DNS server address which is provided to dhcpv6 client by dhcpv6 server. DNS server address is configured for stateless server support. DHCPv6 pool can have multiple number of domain names with maximum of 8. Format - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 483
Managed Switch CLI Manual, Release 8.0 show ipv6 dhcp This command displays the DHCPv6 server name and status. Format Mode show ipv6 dhcp Privileged EXEC Term DHCPv6 is Enabled (Disabled) - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 484
Managed Switch CLI Manual, Release 8.0 Term Definition DHCPv6 Inform Packets Received Number of inform received statistics. DHCPv6 Relay-forward Packets Received Number of relay forward received statistics. DHCPv6 Relay- - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 485
Managed Switch CLI Manual, Release 8.0 Term Mode Definition Shows whether the interface is a is relay, the following information displays. Term Definition Relay Address Relay Interface Number Relay Remote ID Option Flags The IPv6 address of the relay server. The relay server interface in < - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 486
Managed Switch CLI Manual, Release 8.0 show ipv6 dhcp pool This command displays configured DHCP pool. Format Mode show ipv6 dhcp pool Privileged EXEC Term DHCP Pool Name Client DUID Host Prefix/Prefix Length Preferred Lifetime Valid Lifetime DNS Server Address Domain Name - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 487
Managed Switch CLI Manual, Release 8.0 Term Definition Prefix Type IPV6 Prefix type (IAPD, IANA, or IATA). Client Address Address of DHCP Client. Client Interface IPv6 Address of DHCP Client. Expiration Address of DNS server address. Valid Lifetime Valid lifetime in seconds for delegated - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 488
Class Commands" on page 8-10 • "DiffServ Policy Commands" on page 8-19 • "DiffServ Service Commands" on page 8-25 • "DiffServ Show Commands" on page 8-26 • "MAC Access Control List (ACL) Commands" on page 8-32 • "IP Access Control List (ACL) Commands" on page 8-37 • "IPv6 Access Control List (ACL - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 489
Switch CLI Manual, Release 8.0 Class of Service (CoS) Commands This section describes the commands you use to configure and view Class of Service (CoS) dot1p-mapping • Global Config • Interface Config classofservice ip-dscp-mapping This command maps an IP DSCP value to an internal traffic class. The - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 490
-dscp-mapping Global Config classofservice trust This command sets the class of service trust mode of an interface. You can set the mode to trust one of the Dot1p (802.1p), IP DSCP, or IP Precedence packet markings. You can also set the interface mode to untrusted. If you configure an interface to - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 491
CLI Manual, Release 8.0 cos-queue min-bandwidth This command specifies the minimum transmission bandwidth guarantee for each interface queue. The total number of queues supported per ... ] • Global Config • Interface Config Quality of Service (QoS) Commands 8-4 v1.0, July 2009 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 492
Managed Switch CLI Manual, Release 8.0 traffic-shape This command specifies the maximum transmission bandwidth unit/slot/port> parameter is optional and is only valid on platforms that support independent per-port class of service mappings. If specified, the 802.1p mapping table of the interface is - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 493
CLI Manual, Release 8.0 show classofservice ip-precedence-mapping This command displays the current IP Precedence mapping to internal traffic classes for a specific interface. The unit/slot/port parameter is optional and is only valid on platforms that support independent per-port class of service - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 494
Managed Switch CLI Manual, Release 8.0 show classofservice trust This command displays the current trust mode setting for a specific interface. The parameter is optional and is only valid on platforms that support independent per-port class of service mappings. If you specify an - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 495
Managed Switch CLI Manual, Release 8.0 If you specify the interface, the command also displays the following • Each class can contain a maximum of one referenced (nested) class • Class definitions do not support hierarchical service policies Quality of Service (QoS) Commands 8-8 v1.0, July 2009 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 496
Switch CLI Manual, Release 8.0 , IP DSCP, and IP Precedence. While the latter two are only meaningful for IP packet types, CoS marking is allowed for both IP and non-IP packets , but it is not activated. When enabled, DiffServ services are activated. Format Mode diffserv Global Config no diffserv - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 497
DiffServ Class Commands Managed Switch CLI Manual, Release 8.0 Use the DiffServ class commands to define traffic classification. To classify backward compatibility for configurations defined on systems before IPv6 match items were supported. Quality of Service (QoS) Commands v1.0, July 2009 8-10 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 498
Managed Switch CLI Manual, Release 8.0 Note: The CLI mode is changed to Class-Map Config or Ipv6-Class-Map Config when this command is the class. Default Format Mode none class-map rename Global Config Quality of Service (QoS) Commands v1.0, July 2009 8-11 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 499
Managed Switch CLI Manual, Release 8.0 match ethertype This command adds to the specified class definition a match condition based on the value Default Format Mode none match class-map Class-Map Config Ipv6-Class-Map Config Quality of Service (QoS) Commands v1.0, July 2009 8-12 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 500
Managed Switch CLI Manual, Release 8.0 Note: • The parameters and can Config match cos This command adds to the specified class definition a match condition for the Class of Service value (the only tag in a single tagged packet or the first or outer 802.1Q tag of - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 501
Managed Switch CLI Manual, Release 8.0 match ip6flowlbl This command adds to the IP address. The parameter specifies an IP address bit mask and must consist of a contiguous set of leading 1 bits. Default Format Mode none match dstip Class-Map Config Quality of Service - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 502
Manual, Release 8.0 match dstip6 This command adds to the specified class definition a match condition based on the destination IPv6 address > is one of the supported port name keywords. The currently supported values are: six bits of the Service Type octet in the IP header (the low-order - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 503
Config Managed Switch CLI Manual, Release 8.0 match ip precedence This command adds to the specified class definition a match condition based on the value of the IP Precedence field in a packet, which is defined as the high-order three bits of the Service Type octet in the IP header (the low-order - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 504
Managed Switch CLI Manual, Release 8.0 Note: This "free form" version of the IP DSCP/Precedence/TOS match specification gives the user complete control when specifying which bits of the IP Service Type field are checked. Default Format Mode none match ip tos Class-Map Config - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 505
condition based on the source IP address of a packet. The parameter specifies an IP address. The parameter specifies an IP address bit mask and must consist the value for is one of the supported port name keywords Quality of Service (QoS) Commands v1.0, July 2009 8-18 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 506
Managed Switch CLI Manual, Release 8.0 (listed below). The currently supported values are: domain, echo, ftp, ftpdata QoS policy attributes. Assign the class/policy association to an interface to form a service. Specify the policy name when you create the policy. Each traffic class defines - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 507
Manual, Release 8.0 assign-queue This command modifies the queue id to which the associated traffic stream is assigned. The queueid is an integer from 0 to n-1, where n is the number of egress queues supported Drop, Redirect Quality of Service (QoS) Commands v1.0, July 2009 8-20 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 508
Manual, Release 8.0 redirect This command specifies that all incoming packets for the associated traffic stream are redirected to a specific egress interface (physical port or port-channel). Note: This command is not available on the GSM7328Sv1 Quality of Service (QoS) Commands v1.0, July 2009 8-21 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 509
Managed Switch CLI Manual, Release 8.0 Note: The CLI mode is changed to Policy-Class-Map Incompatibilities Drop, Mark IP DSCP, IP Precedence, Police mark ip-dscp This command marks all packets for the associated traffic stream with the specified IP DSCP value. Quality of Service (QoS) Commands v1 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 510
, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef. For set-prec-transmit, an IP Precedence value is required and is specified as an integer from 0-7. Quality of Service (QoS) Commands v1.0, July 2009 8-23 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 511
Managed Switch CLI Manual, Release 8.0 For set-cos-transmit an 802.1p priority value is required and is specified time. If the policy is currently referenced by one or more interface service attachments, this delete attempt fails. Format Mode no policy-map Global Config Quality of - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 512
Managed Switch CLI Manual, Release 8.0 policy-map rename This command changes the name of a DiffServ in the outbound direction. This set of commands consists of service addition/removal. The CLI command root is service-policy. service-policy This command attaches a policy to an interface in the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 513
Format Modes Managed Switch CLI Manual, Release 8.0 service-policy in • Global Config • Interface Config Note: Each interface can have one policy attached. no service-policy This command detaches a policy from an interface in the inbound direction. The parameter is - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 514
. The possible Match Criteria fields are: Destination IP Address, Destination Layer 4 Port, Destination MAC Address, Ethertype, Source MAC Address, VLAN, Class of Service, Every, IP DSCP, IP Precedence, IP TOS, Protocol Keyword, Reference Class, Source IP Address, and Source Layer 4 Port. The values - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 515
Switch CLI Manual, Release 8.0 (rows) i and the maximum allowed entries(rows) in the Service Table. show policy-map This command displays all configuration information for The policy type (Only inbound policy definitions are supported for this platform.) The following information is repeated for - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 516
Switch CLI Manual, Release 8.0 ACL cannot co-exist on the same interface. The class of service value that is set in the 802.1p header of inbound packets non-conform action is set-dscp-transmit. DSCP Value Non-Conform IP The IP Precedence mark value if the non-conform action is set-prec-transmit - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 517
Managed Switch CLI Manual, Release 8.0 If the Policy Name is not specified this command policy type (Only inbound is supported). Class Members List of all class names associated with this policy. show diffserv service This command displays policy service information for the specified interface - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 518
Managed Switch CLI Manual, Release 8.0 Term Definition DiffServ Admin The current setting of number separated by forward slashes. The traffic direction of this interface service. The current operational status of this DiffServ service interface. The name of the policy attached to the interface - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 519
. The limit applies to all ACLs, regardless of type. • The system supports only Ethernet II frame types. • The maximum number of rules per MAC ACL is hardware dependent. • For the GSM7328Sv1, GSM7352Sv1, and GSM7328FS, if you configure an IP ACL on an interface, you cannot configure a MAC ACL on the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 520
Managed Switch CLI Manual, Release 8.0 mac access-list extended This command creates a MAC Access Control List (ACL) identified by , already exists. Format Mode mac access-list extended rename Global Config Quality of Service (QoS) Commands v1.0, July 2009 8-33 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 521
Manual, Release 8.0 {deny | permit} (MAC ACL) This command creates a new rule for the current MAC access list. Each rule is appended to the list of configured rules for the list. Note: The 'no' form of this command is not supported 0x8035 Quality of Service (QoS) Commands v1.0, July 2009 8-34 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 522
Manual used to match all Ethernet layer 2 packets, and is the equivalent of the IP access list "match every" rule. Format Mode {deny|permit} { | mode command is only available on platforms that support independent per-port class of service queue configuration. Note: You should be aware - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 523
Managed Switch CLI Manual, Release 8.0 Format Modes mac access-group [ Deny. Source MAC Address The source MAC address for this rule. Destination MAC The destination MAC address for this rule. Address Ethertype The Ethertype Quality of Service (QoS) Commands v1.0, July 2009 8-36 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 524
The following rules apply to IP ACLs: • Managed switch software does not support IP ACL configuration for IP packet fragments. • The mask, the mask has ones (1's) in the bit positions that are used for the network address, and has zeros (0's) for the bit positions that are not used. In contrast, a - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 525
Manual, Release 8.0 IP Extended ACL: Format Mode access-list {deny | permit} {every | {{icmp | igmp | ip Specifies a destination IP address and netmask for match condition of the IP ACL rule. GSM7328Sv1 and GSM7352Sv1 platforms. Quality of Service (QoS) Commands v1.0, July 2009 8- - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 526
Managed Switch CLI Manual, Release 8.0 no access-list This command deletes an IP ACL that is ip access-list Global Config no ip access-list This command deletes the IP ACL identified by from the system. Format Mode no ip access-list Global Config Quality of Service - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 527
to the specified classification fields. At a minimum, either the every keyword or the protocol, source address, and destination address values must be specified. The source and destination IP address fields may be specified using the Quality of Service (QoS) Commands v1.0, July 2009 8-40 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 528
Manual permit} {every | {{icmp | igmp | ip | tcp | udp | } Config ip access-group This command either attaches a specific IP ACL this IP access list relative to other IP access the currently attached IP access list using Format Modes none ip access-group - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 529
access-lists This command displays an IP ACL is the number used to identify the IP ACL. Format Mode show ip access-lists Privileged EXEC Note: Only the access list fields that you configure are displayed. Quality of Service (QoS) Commands v1.0, July 2009 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 530
for this rule. Source IP Address The source IP address for this rule. Source IP Mask The source IP Mask for this rule. Source L4 Port The source port for this rule. Keyword Destination IP The destination IP address for this rule. Address Destination IP The destination IP Mask for this rule - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 531
Manual, Release 8.0 Term ACL ID Sequence Number Definition Access List name for a MAC or IPv6 access list or the numeric identifier for an IP regardless of type. • The system supports only Ethernet II frame types. • not available on the GSM7328Sv1 or GSM7352Sv1. ipv6 defined for the IP header of - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 532
Managed Switch CLI Manual, Release 8.0 If an IPv6 ACL by this name already exists, this command list of configured rules for the list. Note: The 'no' form of this command is not supported, since the rules within an IPv6 ACL cannot be deleted individually. Rather, the entire IPv6 ACL must be deleted - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 533
CLI Manual, Release 8.0 Note: An implicit 'deny all' IPv6 rule always terminates the access list. A rule may either deny or permit traffic according to the specified classification fields. At a minimum, either the 'every' keyword or the protocol, source address, and destination address values - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 534
Managed Switch CLI Manual, Release 8.0 This command specified in Interface Config mode only Global Config mode. The Interface Config mode command is only available on platforms that support independent per-port class of service queue configuration. Note: You should be aware that the option may - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 535
CLI Manual, Release 8.0 Term Definition Match All Protocol Indicates whether this access list applies to every packet. Possible values are True or False. The protocol to filter for this rule. Source IP Address Source L4 Port Keyword Destination IP Address Destination L4 Port Keyword IP DSCP - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 536
Managed Switch CLI Manual, Release 8.0 Default Format Mode disabled auto-voip all Global Config no auto-voip all Use this command to interfaces of the switch. Format Mode show auto-voip interface {|all} Privileged EXEC Quality of Service (QoS) Commands v1.0, July 2009 8-49 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 537
Managed Switch CLI Manual, Release 8.0 Field Description AutoVoIP Mode The Auto VoIP mode on the interface. Traffic Class The CoS Queue or is not configurable and defaults to the highest CoS queue available in the system for data traffic. Quality of Service (QoS) Commands v1.0, July 2009 8-50 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 538
Chapter 9 Utility Commands This chapter describes the utility commands available in the CLI. The Utility Commands chapter includes the following sections: • "Auto Install Commands" on page 9-2 • "Dual Image Commands" on page 9-4 • "System Information and Statistics Commands" on page 9-6 • "Logging - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 539
Auto Install Commands Managed Switch CLI Manual, Release 8.0 This section describes the Auto Install Commands a DNS server. There are three stepss to Auto Install: 1. Configuration or assignment of an IP address for the device. 2. Assignment of a TFTP server. 3. Obtain a configuration file for the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 540
Managed Switch CLI Manual, Release 8.0 boot autoinstall auto-save This command is used to enable automatically saving the downloaded configuration on the switch. . Default Format Mode Disabled boot autoinstall - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 541
Managed Switch CLI Manual, Release 8.0 boot autoinstall retry-count This command is used to set is 3. Format Mode no boot autoinstall retry-count Privileged EXEC Dual Image Commands The software supports a dual image feature that allows the switch to have two software images in the permanent - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 542
Managed Switch CLI Manual, Release 8.0 boot system This command activates the specified image. It will be the active-image for subsequent reboots and will be loaded by the boot - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 543
Managed Switch CLI Manual, Release 8.0 update bootcode This command updates the bootcode (boot EXEC Term IP Address MAC Address Interface Definition IP address of the management interface or another device on the management network. Hardware MAC address of that device. For a service port the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 544
Managed Switch CLI Manual, Release 8.0 show eventlog This command displays the event log, which contains error messages from the system. The event log is not cleared on a system reset. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 545
Managed Switch CLI Manual, Release 8.0 show version This command displays inventory information for the for this switch. FRU Number Part Number Maintenance Level Manufacturer Burned in MAC Address The field replaceable unit number. Manufacturing part number. Hardware changes that are significant - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 546
Managed Switch CLI Manual, Release 8.0 show interface This command displays a summary of statistics for -layer protocol. The total number of packets received that were directed to the broadcast address. Note that this does not include multicast packets. The total number of packets transmitted - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 547
Managed Switch CLI Manual, Release 8.0 Term Definition Packets Received With Error The number of total number of packets that higher-level protocols requested to be transmitted to the Broadcast address, including those that were discarded or not sent. Transmit Packet The number of outbound - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 548
Managed Switch CLI Manual, Release 8.0 Term Definition Unicast Packets The number of subnetwork-unicast packets delivered to a higher-layer protocol. Received Multicast Packets Received The total number of packets received that were directed to a multicast address. Note that this number does - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 549
Managed Switch CLI Manual, Release 8.0 Term VLAN Deletes Time Since Counters Last Cleared example 01:23:45:67:89:AB. In an IVL system the MAC address will be displayed as 8 bytes. The port through which this address was learned. This object indicates the ifIndex of the interface table entry - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 550
the forwarding database that were automatically learned. Number of MAC addresses in the forwarding database that were manually entered by a user. Number of MAC addresses currently in the forwarding database. Number of MAC addresses the forwarding database can handle. show process cpu This command - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 551
Managed Switch CLI Manual, Release 8.0 Note: It is not necessarily the traffic to the CPU, but different tasks that keep the CPU busy. Format Mode show process cpu Privileged - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 552
Tx Alloc Failures 26212 4087 188943 384555 2478536 0 0 0 0 0 Managed Switch CLI Manual, Release 8.0 show running-config Use this command to display or capture the current setting of different protocol packages supported on the switch. This command displays or captures commands with settings and - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 553
Managed Switch CLI Manual, Release 8.0 If option is used, this command displays/capture commands with settings/ configurations that differ from the defaul value. • If all the flags in a - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 554
Switch CLI Manual, Release 8.0 Term Definition MIBs Supported A list of MIBs supported by this agent. show tech-support Use the show tech-support command to display system and configuration information when you contact technical support. The output of the show tech-support command combines - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 555
Managed Switch CLI Manual, Release 8.0 no terminal length Use this command to set the terminal length to the default value. Format Mode no terminal length Privileged EXEC show terminal - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 556
Managed Switch CLI Manual, Release 8.0 logging buffered wrap This command enables wrapping of in-memory logging when the log file reaches full capacity. Otherwise when the log file reaches - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 557
Managed Switch CLI Manual, Release 8.0 logging console This command enables logging to the You can configure up to eight hosts. The is the IP address of the logging host. The indicates the type of address ipv4 or ipv6 or dns being passed. The value is a - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 558
Managed Switch CLI Manual, Release 8.0 logging host remove This command disables logging to host. See "show logging hosts" on page 9-22 for a list of host indexes. Format Mode logging - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 559
Managed Switch CLI Manual, Release 8.0 Term Definition Console Logging The minimum severity to log to the console log. Messages with an equal or lower Severity Filter numerical severity are - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 560
Managed Switch CLI Manual, Release 8.0 Term Host Index IP Address / Hostname Severity Level Port Host Status Definition (Used for deleting hosts.) IP address or hostname of the logging host. The minimum severity to log to the specified address. The possible values are emergency (0), alert (1), - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 561
Managed Switch CLI Manual, Release 8.0 logging persistent Use this command to configure the System Utility and Clear Commands This section describes the commands you use to help troubleshoot connectivity issues and to restore various configurations to their factory defaults. Utility Commands - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 562
Managed Switch CLI Manual, Release 8.0 traceroute Use the traceroute command to discover the ipaddr value should be a valid IP address. The hostname value should be a valid hostname. Use initTtl to specify the initial time-to-live (TTL), the maximum number of router hops between the local and - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 563
Managed Switch CLI Manual, Release 8.0 Example: The following are examples of the CLI command. traceroute Success: ( on a hop-by-hop basis. The parameter must be a valid IPv6 address or hostname. The optional parameter is the UDP port used as the destination of - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 564
Managed Switch CLI Manual, Release 8.0 clear config This command resets the configuration to the clear config Privileged EXEC clear mac-addr-table This command clears the dynamically learned MAC addresses of the switch. Format Mode clear mac-addr-table Privileged EXEC clear logging buffered - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 565
Managed Switch CLI Manual, Release 8.0 clear igmpsnooping This command clears the tables managed by the IGMP Snooping function and attempts to delete these entries from the Multicast Forwarding Database. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 566
Managed Switch CLI Manual, Release 8.0 enable password This command prompts you to change the Privileged EXEC password. Passwords are a maximum of 64 alphanumeric characters. The password is case sensitive. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 567
Managed Switch CLI Manual, Release 8.0 Using the options described below, you can specify the specify the number of ping packets (ICMP Echo requests) that are sent to the destination address specified by the field. The range for is 1 to 15 requests. Use the interval parameter - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 568
Managed Switch CLI Manual, Release 8.0 1 packets transmitted,0 packets received, 100% packet loss round-trip (msec) min/avg/max = 0/0/0 quit This command closes the current telnet connection or resets the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 569
CLI Manual, Release For TFTP, SFTP and SCP, the parameter is the IP address or host name of the server, is the path to the Note: is also a valid parameter for routing packages that support IPv6. Warning: Remember to upload the existing Switch CLI.cfg file off - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 570
Managed Switch CLI Manual, Release 8.0 Source Destination Description nvram:script nvram:startup will not validate the downloaded script file. An example of the CLI command follows: (NETGEAR Switch CLI Routing) #copy tftp://1.1.1.1/file.scr nvram:script file.scr noval nvram - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 571
Managed Switch CLI Manual, Release 8.0 Source image1 image2 {image1 | image2} {image1 | image2} Destination Description image2 image1 unit:///{image1 | image2} Copy image1 to image2. Copy image2 to image1. Copy - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 572
Managed Switch CLI Manual, Release 8.0 sntp client mode This command enables Simple Network Time Protocol (SNTP) client mode and may set the mode to either broadcast or unicast. Default - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 573
Managed Switch CLI Manual, Release 8.0 sntp unicast client poll-interval This command sets the poll interval for SNTP unicast clients in seconds as a power of two where - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 574
Managed Switch CLI Manual, Release 8.0 Format Mode sntp unicast client poll-retry Global Config no sntp unicast client poll-retry This command will reset the poll retry - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 575
Managed Switch CLI Manual, Release 8.0 Zone name: A name to associate with the time zone Hours-offset: Number of hours difference with UTC Minutes-offset: Number of minutes difference with - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 576
supports. Port Client Mode SNTP Client Port. Configured SNTP Client Mode. show sntp server This command is used to display SNTP server settings and configured servers. Format Mode show sntp server Privileged EXEC Term Definition Server Host Address Server Type Server Stratum IP address - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 577
Managed Switch CLI Manual, Release 8.0 Term Last Attempt Time Last Update Status Total Unicast Requests Failed for the switch. DHCP uses UDP as its transport protocol and supports a number of features that facilitate in administration address allocations. Utility Commands v1.0, July 2009 9-40 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 578
Managed Switch CLI Manual, Release 8.0 ip dhcp pool This command configures a DHCP address pool name on a DHCP server and enters DHCP pool configuration mode. Default Format Mode none ip dhcp pool Global Config no ip dhcp pool This command removes the DHCP address pool. The name should - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 579
Managed Switch CLI Manual, Release 8.0 client-name This command specifies the name for a DHCP router This command specifies the default router list for a DHCP client. {address1, address2... address8} are valid IP addresses, each made up of four decimal bytes ranging from 0 to 255. IP address - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 580
Managed Switch CLI Manual, Release 8.0 dns-server This command specifies the IP servers available to a DHCP client. Address parameters are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. Default Format Mode none dns-server - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 581
, Release 8.0 host This command specifies the IP address and network mask for a manual binding to a DHCP client. Address and Mask are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. The prefix-length is an integer from 0 to 32. Default - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 582
Switch CLI Manual, Release 8.0 network (DHCP Pool Config) Use this command to configure the subnet number and mask for a DHCP address pool on the server. Network-number is a valid IP address, made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. Mask is the IP subnet - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 583
Managed Switch CLI Manual, Release 8.0 domain-name This command specifies the domain name for a DHCP NetBIOS Windows Internet Naming Service (WINS) name servers that are available to DHCP clients. One IP address is required, although one can specify up to eight addresses in one command line. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 584
Managed Switch CLI Manual, Release 8.0 netbios-node-type The command configures the NetBIOS node type This command configures the next server in the boot process of a DHCP client.The parameter is the IP address of the next server in the boot process, which is typically a TFTP server. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 585
Managed Switch CLI Manual, Release 8.0 option The option command configures DHCP Server options DHCP Pool Config ip dhcp excluded-address This command specifies the IP addresses that a DHCP server should not assign to DHCP clients. Low-address and high-address are valid IP addresses; each made up - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 586
Manual, Release 8.0 no ip dhcp excluded-address This command removes the excluded IP addresses for a DHCP client. Low-address and highaddress are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. Format Mode no ip dhcp excluded-address - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 587
. Format Mode no service dhcp Global Config Managed Switch CLI Manual, Release 8.0 ip dhcp bootp automatic This command enables the allocation of the addresses to the bootp client. The addresses are from the automatic address pool. Default Format Mode disabled ip dhcp bootp automatic Global - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 588
Managed Switch CLI Manual, Release 8.0 no ip dhcp conflict logging This command disables conflict logging on DHCP server. Format Mode no ip dhcp conflict logging Global Config clear ip dhcp binding This command deletes an automatic address binding from the DHCP server database. If "*" is - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 589
Switch CLI Manual, Release 8.0 show ip dhcp binding This command displays address bindings for the specific IP address on the DHCP server. If no IP address is specified, the bindings corresponding to all the addresses are displayed. Format Modes show ip dhcp binding [] • Privileged EXEC - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 590
IP address assigned to the client. The list of DNS servers available to the DHCP client . Default Routers The list of the default routers Address The hardware address of a DHCP client. Hardware Address Type Host The protocol of the hardware platform. The IP address and the mask for a manual - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 591
Switch CLI Manual, Release 8.0 show ip dhcp server statistics This command displays DHCP server statistics. Format Modes show ip dhcp server statistics • Privileged EXEC • User EXEC Field Automatic Bindings Expired Bindings Malformed Bindings Definition The number of IP addresses that have - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 592
CLI Manual, Release 8.0 show ip dhcp conflict This command displays address conflicts logged by the DHCP Server. If no IP address is specified, all the conflicting addresses are displayed. Format Modes show ip dhcp conflict [] • Privileged EXEC • User EXEC Term IP address Detection - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 593
Managed Switch CLI Manual, Release 8.0 ip domain name Use this command to define a default IP address corresponding to xxx.yahoo.com. no ip domain name Use this command to remove the default domain name configured using the ip domain name command. Format Mode no ip domain name Global Config ip - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 594
Config Managed Switch CLI Manual, Release 8.0 ip name server Use this command to configure the available name servers. Up to eight servers can be defined in one command or by using multiple commands. The parameter is a valid IPv4 or IPv6 address of the server. The preference - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 595
CLI Manual, Release 8.0 no ip host Use this command to remove the name-to-address mapping. Format Mode no ip host Global Config ipv6 host Use this command to define static host name-to-IPv6 address mapping in the host cache. is host name. is the IPv6 address of - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 596
to the default. Format Mode no ip domain retry Global Config Managed Switch CLI Manual, Release 8.0 ip domain timeout Use this command to specify Mode no ip domain timeout Global Config clear host Use this command to delete entries from the host name-to-address cache. This - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 597
Managed Switch CLI Manual, Release 8.0 show hosts Use this command to display the default domain name, a list of name server hosts, the static and the cached list of host names and addresses ranges from 1-255 characters. This command displays both IPv4 and IPv6 entries. .. Format Mode show - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 598
www.stanford.edu 72 3 IP Packet Capture Commands Managed Switch CLI Manual, Release 8.0 171.64.14.203 Packet capture commands assist in troubleshooting protocol-related problems with the management CPU. The packets to and from the management CPU can be captured in an internally allocated buffer - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 599
Managed Switch CLI Manual, Release 8.0 no capture receive packet This command disables the capturing of receive packets. Format Mode no capture receive packet Global Config capture all packets This - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 600
Managed Switch CLI Manual, Release 8.0 Mode Default Global Config Enabled Serviceability Packet Tracing Commands These commands improve the capability of network engineers to diagnose conditions affecting their managed switch product. Caution! The output of "debug" commands - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 601
Managed Switch CLI Manual, Release 8.0 no debug auto-voip Use this command to disable debug clear Privileged EXEC debug console This command enables the display of "debug" trace output on the login session in which it is executed. Debug console display must be enabled in order to view any trace - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 602
Managed Switch CLI Manual, Release 8.0 debug dot1x packet Use this command to enable dot1x packet debug trace. Default Format Mode disabled debug dot1x Privileged EXEC no debug dot1x packet - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 603
Managed Switch CLI Manual, Release 8.0 debug igmpsnooping packet transmit This non-stacking device. Source MAC address of the packet. Destination multicast MAC address of the packet. The source IP address in the IP header in the packet. The destination multicast IP address in the packet. The type - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 604
Managed Switch CLI Manual, Release 8.0 no debug igmpsnooping transmit This non-stacking device. Source MAC address of the packet. Destination multicast MAC address of the packet. The source IP address in the ip header in the packet. The destination multicast ip address in the packet. The type - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 605
Managed Switch CLI Manual, Release 8.0 Parameter Group Definition Multicast group address in the IGMP header. no debug igmpsnooping receive This command disables tracing of received IGMP Snooping packets. Format Mode no debug igmpsnooping receive Privileged EXEC debug ip acl Use this command - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 606
Manual, Release 8.0 no debug ip dvmrp packet Use this command to disable debug tracing of DVMRP packet reception and transmission. Format Mode no debug ip dvmrp packet [receive|transmit] Privileged EXEC debug ip Vital information such as source address, destination address, control packet type, - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 607
CLI Manual, Release 8.0 Format Mode debug ip mcache packet [receive|transmit] Privileged EXEC no debug ip mcache packet Use this command to disable debug tracing of MDATA packet reception and transmission. Format Mode no debug ip mcache packet [receive|transmit] Privileged EXEC debug ip pimdm - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 608
Switch CLI Manual, Release 8.0 debug ip pimsm packet address, control packet type, packet length, and the interface on which the packet is received or transmitted is displayed on the console. Default Format Mode disabled debug ip pimsm packet [receive|transmit] Privileged EXEC no debug ip - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 609
Managed Switch CLI Manual, Release 8.0 debug ipv6 mcache packet Use this command for tracing in the command, then all MLDv6 packet traces are dumped. Vital information such as source address, destination address, control packet type, packet length, and the interface on which the packet is received - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 610
Managed Switch CLI Manual, Release 8.0 Format Mode no debug ipv6 mld packet [receive|transmit the command, then all PIMDMv6 packet traces are dumped. Vital information such as source address, destination address, control packet type, packet length, and the interface on which the packet is received - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 611
Managed Switch CLI Manual, Release 8.0 Format Mode no debug ipv6 pimsm packet [receive| command, then all MLD snooping packet traces are dumped. Vital information such as source address, destination address, control packet type, packet length, and the interface on which the packet is received - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 612
Managed Switch CLI Manual, Release 8.0 no debug mldsnooping packet Use this 02 11:03:31 10.50.50.1-2 OSPF[46300472]: ospf_debug.c(297) 25430 % Pkt RX - Intf:2/0/48 Src Ip:192.168.50.2 DestIp:224.0.0.5 AreaId:0.0.0.0 Type:HELLO NetMask:255.255.255.0 DesigRouter:0.0.0.0 Backup:0.0.0.0 JAN 02 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 613
OSPF Packet. HELLO packet field definitions: Parameter Netmask DesignRouter Backup Definition The netmask in the hello packet. Designated Router IP address. Backup router IP address. DB_DSCR packet field definitions: Field MTU Options Flags Seq Definition MTU Options in the OSPF packet. Could - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 614
LS_UPD packet field definitions. Field Length Definition Length of packet LS_ACK packet field definitions. Managed Switch CLI Manual, Release 8.0 Field Length Definition Length of packet no debug ospf packet This command disables tracing of OSPF packets. Format Mode no debug ospf packet - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 615
Managed Switch CLI Manual, Release 8.0 debug ping packet This command enables tracing of as 1 for interfaces on a non-stacking device. The source IP address in the IP header in the packet. The destination IP address in the IP header in the packet. Type determines whether or not the ICMP message - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 616
Managed Switch CLI Manual, Release 8.0 debug rip packet This command turns on tracing of RIP shown as 1 for interfaces on a non-stacking device. The source IP address in the IP header of the packet. The destination IP address in the IP header of the packet. RIP version used . Type - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 617
Managed Switch CLI Manual, Release 8.0 no debug rip packet This command disables tracing of RIP requests and responses. Format Mode no debug rip packet Privileged EXEC debug sflow packet - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 618
Managed Switch CLI Manual, Release 8.0 no debug spanning-tree bpdu This command disables for interfaces on a non-stacking device. Source MAC address of the packet. Spanning tree protocol version (0-3). 0 refers to STP, 2 RSTP and 3 MSTP. MAC address of the CIST root bridge. Priority of the CIST - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 619
Managed Switch CLI Manual, Release 8.0 no debug spanning-tree bpdu receive This command for interfaces on a non-stacking device. Source MAC address of the packet. Spanning tree protocol version (0-3). 0 refers to STP, 2 RSTP and 3 MSTP. MAC address of the CIST root bridge. Priority of the CIST - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 620
Managed Switch CLI Manual, Release 8.0 no debug spanning-tree bpdu transmit This command the cable connection status on a selected port. Note: The cable test feature is supported only for copper cable. It is not supported for optical fiber cable. If the port has an active link while the cable - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 621
supported by the PHY for the current link speed, the cable length is displayed as a range between the shortest estimated length and the longest estimated length. Note that if the link is down and a cable is attached to a 10/100 Ethernet adapter , max datagram size, IP address, and port). Format Mode - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 622
Managed Switch CLI Manual, Release 8.0 Field Receiver Max Datagram Size Receiver IP Receiver Port Description The maximum datagrams. The allowed range is 200 to 9116). The default is 1400. The sFlow receiver IP address. If set to 0.0.0.0, no sFlow datagrams will be sent. The default is 0.0.0.0. The - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 623
Managed Switch CLI Manual, Release 8.0 Field Sampling Rate Description The statistical sampling rate for packet sampling from this source. A sampling rate of 1 counts all packets. A value of zero (0) disables - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 624
Managed Switch CLI Manual, Release 8.0 Format Mode no sflow poller { | interval < example CLI display output for the command. (switch) #show sflow agent sFlow Version 1.3;Netgear;1.0 IP Address 10.131.12.66 show sflow pollers Use this command to display the sFlow polling instances - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 625
Manual, Release 8.0 Field Description Poller Data Source Receiver Index Poller Interval The sFlowDataSource (slot/port) for this sFlow sampler. This agent will support sFlow receiver IP address. The sFlow receiver IP address type. For an IPv4 address, the value is 1 and for an IPv6 address, the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 626
Managed Switch CLI Manual, Release 8.0 Datagram Version 5 Maximum Datagram Size 1400 show sflow samplers Use Data The sFlowDataSource (slot/port) for this sFlow sampler. This agent will support Physical Source ports only. Receiver Index The sFlowReceiver configured for this sFlow sampler. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 627
" on page 10-40. • "RADIUS Commands" on page 10-52. • "TACACS+ Commands" on page 10-67. • "Configuration Scripting Commands" on page 10-71. • "Pre-login Banner and System Prompt Commands" on page 10-73. Warning: The commands in this chapter are in one of three functional groups: • Show commands - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 628
Manual, Release 8.0 Configuring the Switch Management CPU To manage the switch via the web GUI or telnet, an IP address needs to be assigned to the switch management CPU. Whereas there are CLI commands that can be used to do this, ezconfig simplifies the task. The tool is applicable to all NETGEAR - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 629
Managed Switch CLI Manual, Release 8.0 The following is an example of an ezconfig session. NETGEAR EZ Configuration Utility Hello and Welcome! This utility will walk you thru assigning the IP address for the switch management CPU. It will allow you to save the changes at the end. After the session, - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 630
Managed Switch CLI Manual, Release 8.0 There are changes detected, do you wish to save the changes . Format Mode enable User EXEC network parms This command sets the IP address, subnet mask and gateway of the device. The IP address and the gateway must be on the same subnet. Format Mode - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 631
none parameter, you must configure the network information for the switch manually. Default Format Mode none network protocol {none | bootp | dhcp} Privileged EXEC network mac-address This command sets locally administered MAC addresses. The following rules apply: • Bit 6 of byte 0 (called the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 632
Managed Switch CLI Manual, Release 8.0 no network mac-type This command resets the value of MAC address to its default. Format Mode no network mac-type Privileged EXEC network javamode This command specifies whether or not the switch should allow access to - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 633
are the burned in or the Locally Administered address. The factory default is to use the burned in MAC address. The following shows example CLI display output for the network port. (Netgear Switch) #show network Interface Status Always Up IP Address 10.250.3.1 Subnet Mask 255.255.255.0 Default - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 634
Managed Switch CLI Manual, Release 8.0 Management VLAN ID 1 Web Mode Enable Java | ssh} Global Config serial baudrate This command specifies the communication rate of the terminal interface. The supported rates are 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200. Default Format Mode 9600 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 635
Managed Switch CLI Manual, Release 8.0 no serial baudrate This command sets the communication Config login authentication To specify login authentication method list for remote telnet or console, use the login authentication command in line configuration mode. Format Mode login authentication - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 636
Managed Switch CLI Manual, Release 8.0 enable authentication To specify authentication method list when the user switch. Format Modes show serial • Privileged EXEC • User EXEC Term Definition Serial Port Login The time, in minutes, of inactivity on a Serial port connection, after which the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 637
Manual, Release 8.0 This section describes the commands you use to configure and view Telnet settings. You can use Telnet to manage the device from a remote management host. ip to a remote host. The host value must be a valid IP address or host name. Valid values for port should be a valid - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 638
Managed Switch CLI Manual, Release 8.0 transport input telnet This command regulates new Telnet the Telnet Server Admin Mode is disabled, Telnet sessions cannot be established. Use the ip telnet server enable command to enable Telnet Server Admin Mode. Default Format Mode enabled transport - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 639
Managed Switch CLI Manual, Release 8.0 no transport output telnet Use this command to prevent new outbound Telnet connection from being established. Format Mode no transport output telnet Line Config - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 640
Managed Switch CLI Manual, Release 8.0 no session-timeout This command sets the Telnet session timeout value to the default. The timeout value unit of time is minutes. Format Mode - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 641
Managed Switch CLI Manual, Release 8.0 no telnetcon timeout This command sets the Telnet connection session The number of minutes an outbound Telnet session is allowed to remain inactive before Login Timeout being logged off. Maximum The number of simultaneous outbound Telnet connections allowed. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 642
Managed Switch CLI Manual, Release 8.0 • Privileged EXEC • User EXEC Term Definition Remote Connection Login Timeout (minutes) This object indicates the number of minutes The system allows a maximum of 5 SSH sessions. ip ssh Use this command to enable SSH access to the system. (This command is - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 643
Manual, Release 8.0 Format Mode ip ssh Privileged EXEC ip ssh protocol This command is used to set or remove protocol levels (or versions) for SSH. Either SSH1 (1), SSH2 (2), or both SSH 1 and SSH 2 (1 and 2) can be set. Default Format Mode 1 and 2 ip ssh protocol [1] [2] Privileged EXEC ip - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 644
Managed Switch CLI Manual, Release 8.0 no sshcon maxsessions This command sets the maximum timeout duration. Format Mode no sshcon timeout Privileged EXEC show ip ssh This command displays the ssh settings. Format Mode show ip ssh Privileged EXEC Management Commands v1.0, July 2009 10-18 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 645
Managed Switch CLI Manual, Release 8.0 Term Definition Administrative This field indicates of 1024 bits. The resulting certificate is generated with a common name equal to the lowest IP address of the device and a duration of 365 days. Format Mode crypto certificate generate Global Config - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 646
Managed Switch CLI Manual, Release 8.0 crypto key generate rsa Use this command to generate an RSA key pair for SSH. The new key files will overwrite any existing generated - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 647
Managed Switch CLI Manual, Release 8.0 ip http server This command enables access to the switch through the Web interface. When access is enabled, the user can login to the switch from the Web interface. When access is disabled, the user cannot login to the switch's Web server. Disabling the Web - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 648
Managed Switch CLI Manual, Release 8.0 ip http java This command enables the Web Java mode. The Java mode applies to both secure and un-secure Web connections. Default Format Mode Enabled ip http java Privileged EXEC no ip http java This command disables the Web Java mode. The Java mode - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 649
Managed Switch CLI Manual, Release 8.0 ip http authentication This command specifies the authentication methods for radius, no authentication is used if the radius server is down.. Format Mode ip http authentication method1 [method2 ...] Global ConfigC Term Local Radius Tacacs None Definition - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 650
Managed Switch CLI Manual, Release 8.0 no ip http session maxsessions This command restores the number of allowable un-secure HTTP sessions to the default value. Format Mode no ip http session maxsessions Privileged EXEC ip http session soft-timeout This command configures the soft timeout for - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 651
Managed Switch CLI Manual, Release 8.0 no ip http secure-session maxsessions This command restores the number of allowable secure HTTP sessions to the default value. Format Mode no ip http secure-session maxsessions Privileged EXEC ip http secure-session soft-timeout This command configures - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 652
Managed Switch CLI Manual, Release 8.0 no ip http secure-session hard-timeout This command resets the hard timeout for secure HTTP sessions to the default value. Format Mode no ip http secure-session hard-timeout Privileged EXEC ip https authentication This command specifies the authentication - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 653
secure-port Privileged EXEC Managed Switch CLI Manual, Release 8.0 no ip http secure-port This command is used to reset the SSL port to the default value. Format Mode no ip http secure-port Privileged EXEC ip http secure-protocol This command is used to set protocol levels (versions - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 654
Managed Switch CLI Manual, Release 8.0 Term Definition Secure Protocol Level(s) Maximum Allowable HTTPS Sessions HTTPS Session Hard port connections to the switch. Format Mode show loginsession Privileged EXEC Term ID Definition Login Session ID. Management Commands v1.0, July 2009 10-28 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 655
Managed Switch CLI Manual, Release 8.0 Term User Name Connection From Idle Time Session Time Session Type Definition The name the user entered to log on to the system. IP address of the remote client machine or EIA-232 for the serial port connection. Time this session has been idle. Total time - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 656
account. Format Mode no username Global Config Managed Switch CLI Manual, Release 8.0 Note: You cannot delete the "admin" user account. privileges for the specified login user. The valid accessmode values are readonly or readwrite. The is the login user name for which - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 657
Format Mode Managed Switch CLI Manual, Release 8.0 username snmpv3 accessmode {readonly | valid authentication protocols are none, md5 or sha. If you specify md5 or sha, the login password is also used as the snmpv3 authentication password and therefore must be at least eight characters - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 658
Managed Switch CLI Manual, Release 8.0 username snmpv3 encryption This command specifies the . If you select none, you do not need to provide a key. The value is the login user name associated with the specified encryption. You must enter the in the same case you used - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 659
Managed Switch CLI Manual, Release 8.0 Term Definition Access Mode Shows whether the user protocol to be used for the specified login user. Authentication SNMPv3 Encryption The encryption protocol to be used for the specified login user. show users accounts This command displays - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 660
Managed Switch CLI Manual, Release 8.0 Term User Name Definition The full name of the user. show users login-history This command is used to display the users who have logged in previously. Format Mode show users login-history [{user name}] Privileged EXEC Term Login Time Username Protocol - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 661
Managed Switch CLI Manual, Release 8.0 passwords history Use this command to set the number of previous passwords that shall be stored for each user account. When a local user changes - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 662
Managed Switch CLI Manual, Release 8.0 passwords lock-out Use this command to strengthen the security of the switch by locking user accounts that have failed login due to wrong passwords. When a lockout count is configured, a user that is logged in must enter the correct password within that count - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 663
Manual, Release 8.0 aaa authentication login This command is used to set authentication at login. The default and optional list names that you create with the aaa authentication login command are used with the login down. where: Format Mode aaa authentication login {default | list-name} method1 [ - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 664
Managed Switch CLI Manual, Release 8.0 no aaa authenticaton login This command is used to remove authentication at login. . Format Mode no aaa authentication login {default | list-name} Global Config aaa authenticaton enable This command is used to set authentication when the user access - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 665
Managed Switch CLI Manual, Release 8.0 Keyword line none radius tacacs Description Uses the line password for authentication. Uses no authentication. Uses the list of all RADIUS servers for authentication. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 666
Managed Switch CLI Manual, Release 8.0 method1 [method2...] At least one from the following authentication. no aaa authentication dot1x This command is used to remove the authentication at login. Format Mode no aaa authentication dot1x default Global Config write memory Use this command - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 667
Managed Switch CLI Manual, Release 8.0 snmp-server This command sets the name and the physical location of the switch, and the organization responsible for the network. The range for < - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 668
Managed Switch CLI Manual, Release 8.0 snmp-server community ipaddr This command sets a client IP address for an SNMP community. The address is the associated community SNMP packet sending address and is used along with the client IP mask value to denote a range of IP addresses from which SNMP - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 669
Managed Switch CLI Manual, Release 8.0 no snmp-server community ipmask This command sets a client IP mask for an SNMP community to 0.0.0.0. The name is the applicable community name. The community name may be up to 16 alphanumeric characters. Format Mode - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 670
Managed Switch CLI Manual, Release 8.0 snmp-server community rw This command restricts access to This command enables the sending of new violation traps designating when a packet with a disallowed MAC address is received on a locked port. Note: For other port security commands, see "Protected Ports - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 671
no snmp-server enable traps This command disables the Authentication Flag. Format Mode no snmp-server enable traps Global Config Managed Switch CLI Manual, Release 8.0 snmp-server enable traps linkmode Note: This command may not be available on all platforms. This command enables Link Up/Down - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 672
Managed Switch CLI Manual, Release 8.0 no snmp-server enable traps multiusers This command disables . The SNMP trap address can be set using both an IPv4 address format as well as an IPv6 global address format. The following shows an example of the CLI command. (Netgear Switch)# snmptrap mytrap - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 673
Managed Switch CLI Manual, Release 8.0 Note: The parameter does not need to be unique, however characters. The parameter options are snmpv1 or snmpv2. Note: This command does not support a "no" form. Default Format Mode snmpv2 snmptrap snmpversion - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 674
Manual, Release 8.0 snmptrap ipaddr This command assigns an IP address to a specified community name. The maximum length of name is 16 case-sensitive alphanumeric characters. Note: IP addresses in the SNMP trap receiver table must be unique. If you make multiple entries using the same IP address - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 675
Managed Switch CLI Manual, Release 8.0 Format Mode snmp trap link-status Interface Config no snmp trap link-status This command disables link status traps by interface. Note: This command - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 676
Switch CLI Manual, Release 8.0 show snmpcommunity This command displays SNMP community information. Six communities are supported. You IP address before comparison with IP address. If the result matches with IP address then the address is an authenticated IP address. For example, if the IP address - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 677
Managed Switch CLI Manual, Release 8.0 Term SNMP Trap Name IP Address IPv6 Address SNMP Version Status Definition The community string of the SNMP trap packet sent to the trap manager. The string is case sensitive and can be up to 16 alphanumeric characters. The IPv4 address to receive SNMP traps - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 678
Managed Switch CLI Manual, Release 8.0 Term DVMRP Traps OSPFv2 Traps OSPFv3 Traps PIM Traps the commands you use to configure the switch to use a Remote Authentication Dial-In User Service (RADIUS) server on your network for authentication and accounting. authorization network radius Use this - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 679
Managed Switch CLI Manual, Release 8.0 radius accounting mode This command is used to enable the NAS-IP Address attribute in the RADIUS requests. If the specific IP address is configured while enabling this attribute, the RADIUS client uses that IP address while sending NAS-IP-Address attribute in - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 680
Manual, Release 8.0 Format Mode no radius server attribute [] Global Config The following shows an example of the command. (Switch) (Config) #radius server attribute 4 192.168.37.60 (Switch) (Config) #radius server attribute 4 radius server host This command configures the IP address - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 681
Managed Switch CLI Manual, Release 8.0 when connecting to the RADIUS accounting server. If a < ] [port ][server-type] Global Config Field ipaddr dnsname 0-65535 servername Description The IP address of the server. The DNS name of the server. The port number to use to connect - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 682
Managed Switch CLI Manual, Release 8.0 (Switch) (Config) #radius server host auth 192.168.37.60 name server. The IP address or hostname provided must match a previously configured server. When this command is executed, the secret is prompted. Text-based configuration supports Radius server's - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 683
Switch CLI Manual, Release 8.0 radius server msgauth This command enables the message authenticator attribute to be used for the specified RADIUS Authenticating server. Format Mode radius server msgauth Global Config Field ip addr dnsname Description The IP address of the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 684
Managed Switch CLI Manual, Release 8.0 Field ip addr dnsname Description The IP address of the RADIUS Authenticating server. The DNS name of the server. radius server retransmit This command configures the global parameter for the RADIUS client that - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 685
Managed Switch CLI Manual, Release 8.0 Default Format Mode 5 radius server timeout Global Config Field retries Description Maximum number of transmission attempts in the range . no radius server - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 686
Managed Switch CLI Manual, Release 8.0 Term Definition Number of Retransmits Time Duration The | name [ ] } ] Privileged EXEC Field ipaddr dnsname servername Current Description The IP address of the authenticating server. The DNS name of the authenticating server. The alias name to - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 687
Manual, Release 8.0 Field Description Host Address Server Name Port The IP address of the host. The name of the authenticating server. The port used for communication with the authenticating server. Type Specifies whether this server is a primary or secondary type. Current Host Address The IP - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 688
Managed Switch CLI Manual, Release 8.0 Server Name Default_RADIUS_Server Host Address 192.168.37.58 Secret Configured No Message Authenticator RADIUS accounting server details are displayed. Term Host Address Definition The IP address of the host. Management Commands v1.0, July 2009 10-62 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 689
Managed Switch CLI Manual, Release 8.0 Term Server Name Port Secret Configured Definition The name of the { | name } Privileged EXEC Term ipaddr dnsname servername Definition The IP address of the server. The DNS name of the server. The alias name to identify the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 690
Managed Switch CLI Manual, Release 8.0 Term Definition RADIUS Accounting The name of the accounting server. Server Name Server Host Address The IP address of the host. Round Trip Time The time interval, in hundredths of a second, between the most recent AccountingResponse and the Accounting- - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 691
Manual, Release 8.0 (Switch) #show radius accounting statistics name Default_RADIUS_Server RADIUS Accounting Server Name Default_RADIUS_Server Host Address Name The name of the authenticating server. Server Host Address The IP address of the host. Access Requests The number of RADIUS Access - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 692
Managed Switch CLI Manual, Release 8.0 Term Malformed Access Responses Bad Authenticators Pending Switch) #show radius statistics 192.168.37.200 RADIUS Server Name Default_RADIUS_Server Server Host Address 192.168.37.200 Access Requests 0.00 Access Retransmissions 0 Access Accepts 0 Access - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 693
Switch CLI Manual, Release provides for separate authentication, authorization, and accounting services. The original protocol was UDP based with messages IP address. The parameter is the IP address of the TACACS+ server. Format Mode no tacacs-server host - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 694
Managed Switch CLI Manual, Release 8.0 tacacs-server key Use the tacacs-server key command to server. This key must match the key used on the TACACS+ daemon. Text-based configuration supports TACACS server's secrets in encrypted and non-encrypted format. When you save the configuration, these - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 695
Managed Switch CLI Manual, Release 8.0 no tacacs-server timeout Use the no tacacs-server name. For an empty string use " ". (Range: 0 - 128 characters). Text-based configuration supports TACACS server's secrets in encrypted and non-encrypted format. When you save the configuration, these secret - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 696
Managed Switch CLI Manual, Release 8.0 priority Use the priority command in TACACS Configuration mode TACACS+ server. Format Mode show tacacs [] Privileged EXEC Term Host Address Port TimeOut Priority Definition The IP address or hostname of the configured TACACS+ server. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 697
Managed Switch CLI Manual, Release 8.0 Configuration Scripting Commands Configuration Scripting allows you to generate text-formatted script files representing the current configuration of a system. You can upload these configuration - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 698
Managed Switch CLI Manual, Release 8.0 Note: To specify a blank password for a user in the configuration script, you must specify it as a space within quotes. For example, to change the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 699
be used as a tool for script development. Validation identifies potential problems. It might not identify all problems with a given script on any given device. Format Mode script validate Privileged EXEC Pre-login Banner and System Prompt Commands This section describes the commands - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 700
Managed Switch CLI Manual, Release 8.0 Default Format Mode none copy nvram:clibanner copy nvram:clibanner - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 701
understanding of the system configuration and details of the problem will assist NETGEAR, Inc. in determining the root cause of such a problem. Note: This chapter is not a complete list "Stacking" on page 11-23 • "Technologies" on page 11-23 • "O/S Support" on page 11-26 Core v1.0, July 2009 11-1 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 702
Managed Switch CLI Manual, Release 8.0 Table 11-1: BSP Log Messages Component BSP BSP Message Event(0xaaaaaaaa) Starting code... Cause Switch has restarted. BSP initialization complete, starting 7000 series application. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 703
Managed Switch CLI Manual, Release 8.0 Table 11-3: System Log Messages Component SYSTEM SYSTEM SYSTEM SYSTEM SYSTEM SYSTEM SYSTEM Message Cause Configuration file Switch CLI.cfg size is 0 (zero) bytes - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 704
Utilities Managed Switch CLI Manual, Release 8.0 Table 11-4: Trap Mgr Log Message Component Trap Mgr Message Link Up/Down: unit/slot/port Cause An interface changed link state. Table 11-5: - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 705
CLI Manual, problem communicating with the RADIUS server. A problem communicating with the RADIUS server during transmit. Resource issue with RADIUS Client service : Response is missing MessageAuthenticator, id=xxx RADIUS: Server address doesn't match configured server The RADIUS Client received an - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 706
Managed Switch CLI Manual, Release 8.0 Table 11-8: TACACS+ Log Messages Component TACACS+ TACACS+ TACACS+ TACACS+ server. TACACS+: received invalid packet type from Received packet type that is not supported. server. TACACS+: invalid major version in received Major version mismatch. packet. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 707
Managed Switch CLI Manual, Release 8.0 Table 11-12: EmWeb Log Messages Component EmWeb EmWeb EmWeb EmWeb EmWeb EmWeb EmWeb EmWeb EmWeb EmWeb Message Cause EMWEB (Telnet): Max number of Telnet login sessions exceeded EMWEB (SSH): Max number of SSH login sessions exceeded Handle table overflow - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 708
Managed Switch CLI Manual, Release 8.0 Table 11-14: WEB Log Messages Component WEB Message Max clients exceeded WEB WEB WEB WEB WEB Error on send to sockfd XXXX, closing - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 709
Managed Switch CLI Manual, Release 8.0 Table 11-16: SSHD Log Messages Component SSHD = YYYY, errno = ZZZZ Failed to open connection to unsecure server. XXXX is the unsecure server socket address. YYYY is the result returned from connect function and ZZZZ is the error code. SSLT: Msg Queue is - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 710
Managed Switch CLI Manual, Release 8.0 Table 11-18: User_Manager Log Messages Component Message User_Manager User Login Failed for group This appears when a dtl call fails to add interface mask at the driver level Protected Ports Cannot delete intIfNum xxx from group yyy This appears when a - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 711
Managed Switch CLI Manual, Release 8.0 Table 11-20: IP Subnet VLANS Log Messages Component Message Cause IPsubnet vlans has come from the CLI IPsubnet vlans IPsubnet vlans IPsubnet vlans IPsubnet vlans IP Subnet Vlans: failed to save configuration This message appears when save configuration - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 712
Managed Switch CLI Manual, Release 8.0 802.1X disable> dot1x in driver dot1xSendRespToServer: dot1xRadiusAccessRequestSend failed Failed sending igmp mrouter mode xxx for interface yyy Failed to set interface multicast router mode due to IGMP Snooping message queue being full IGMP Snooping Failed - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 713
Managed Switch CLI Manual, Release 8.0 Table buffers Cause Failed to set VLAN multicast router mode due to IGMP Snooping message queue 02X:%02X:%02X:%02X gmd_create_entry: GMRP failure adding MFDB entry: vlan %d and address %s Mismatch between the gmd (gmrp database) and MFDB. MFDB table is full - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 714
Managed Switch CLI Manual, Release 8.0 Table 11-25: 802.3ad Log Messages Component 802.3ad Message Cause fdbSetAddressAgingTimeOut: Failure Unable to set the age time in the hardware setting fid %d address aging timeout to %d Table 11-27: Double VLAN Tag Log Message Component Message - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 715
Managed Switch CLI Manual, Release 8.0 Table 11-30: 802.1Q Log Messages Component 802.1Q 802.1Q 802.1Q 802.1Q 802.1Q Message Cause dot1qIssueCmd: Unable to send - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 716
Switch CLI Manual, Release on intf i. interface has resulted in requiring more rules than the platform supports. ACL name, rule x: This rule is not being logged The trap for this ACL rule which contains a logging attribute. IP ACL number: Forced truncation of one or While processing the saved - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 717
Managed Switch CLI Manual, Release 8.0 Table 11-35: CoS Log Message Component COS Message Cause may lead to an inconsistent state in the system and resetting is advised. Policy invalid for service intf: "policy name, intIfNum x, direction y The DiffServ policy definition is not compatible with - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 718
Managed Switch CLI Manual, Release 8.0 Table 11-38: OSPFv2 Log Messages Component to the maximum value to encourage other routers to not compute routes through the overloaded router. OSPFv2 ignored a Database Description packet whose MTU is greater than the IP MTU on the interface where the DD - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 719
Managed Switch CLI Manual, Release 8.0 Table 11-39: OSPFv3 Log Messages Component OSPFv3 OSPFv3 database. When the OSPFv3 LSDB becomes full, OSPFv3 logs this message. OSPFv3 reoriginates its router LSAs with the R-bit clear indicating that OSPFv3 is overloaded. OSPFv3 periodically verifies the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 720
Switch CLI reverts the router's priority to the default. VRRP ignored an incoming message whose time to live (TTL) in the IP header was not 255. Table 11-42: ARP Log Message Component ARP Message Cause ARP received mapping for IP address xxx to MAC address yyy. This IP address may be configured - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 721
Multicast Managed Switch CLI Manual, Release 8.0 Table 11-45: Cache Log Messages Component Cache Message Out of memory when creating entry. Cache Out of memory when creating cache. Cause When - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 722
Switch CLI Manual, Release Trying to add static RP. Dynamic RP with same ip addr exists Router learns RP-group mapping through Bootstrap messages received.This message message is invalid message is received with invalid inner ip source or group address. Table 11-49: PIM-DM Log Messages Component - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 723
Table 11-49: PIM-DM Log Messages Component PIM-DM Message Error creating PIM-DM pipe Managed Switch CLI Manual, Release 8.0 Cause This message is logged when the PIM-DM Pipe (that receives control messages) creation fails. Table 11-50: DVMRP Log Messages Component DVMRP - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 724
Managed Switch CLI Manual, Release 8.0 Table 11-52: System General Error Messages Component OS OS OS OS OS OS OS OS OS OS OS OS OS OS OS Message Cause In hapiBroadSystemMacAddress call to 'bcm_l2_addr_add' - FAILED : x Failed to add an L2 address to the MAC table. This should only happen when - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 725
Managed Switch CLI Manual, Release 8.0 Table 11-52: System General Error Messages Component the BCM uport\nbcmx_l2_addr->lport = x USP not able to be calculated from the learn event for BCM driver. Unable to insert route R/P Route 'R' with prefix 'P' could not be inserted in the hardware route - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 726
Manual, Release 8.0 Table 11-52: System General Error Messages Component OS OS OS Message Cause USL: failed to sync initiator table on unit=x USL: failed to sync terminator table on unit=x USL: failed to sync ip Support Table address requested to ping can not be converted to an Internet address - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 727
Manual, Release 8.0 Cause During the call to remove the interface from the route table, the attempt to get an ipv4 interface address remove the interface from the route table, the attempt to delete the primary ipv4 address from the stack failed. The requested semaphore can not be taken because: the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 728
Managed Switch CLI Manual, Release 8.0 Chapter 12 Captive Portal Commands The Captive Portal against a database of authorized Captive Portal users before access is granted. The Authentication server supports both HTTP and HTTPS web connections. In addition, Captive Portal can be configured to - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 729
Managed Switch CLI Manual, Release 8.0 no enable Use this command to globally disable captive portal. Default Format Mode disabled no enable Captive Portal Configuration mode http port Use this - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 730
Managed Switch CLI Manual, Release 8.0 no https port Use this command to reset the HTTPs port to the default HTTPS port 443. Format Mode no https port Captive Portal - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 731
reason why the operational is disabled. CP IP Address It is the captive portal server IP address. Example (switch)#show captive-portal Administrative Mode to be served again. Supported Captive The maximum number of captive portal instances supported by switch. It supports up Portals to 10 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 732
Managed Switch CLI Manual, Release 8.0 Term Definition Active Captive Portals The number of active captive portal instances. System Supported The maximum number of user can be authenticated. Users Local Supported The maximum number of local user can be created. Users Authenticated Users The - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 733
Managed Switch CLI Manual, Release 8.0 no configuration Use this command to to delete a CP configuration. The default configuration cannot be deleted. Format Mode no configuration Captive Portal Configuration - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 734
Managed Switch CLI Manual, Release 8.0 no name Use this command to remove a configuration name. Format Mode no name Captive Portal Instance mode protocol Use this command to configure the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 735
Managed Switch CLI Manual, Release 8.0 group Use this command to configure a group ID for this captive portal configuration. If a group number is configured, the user entry (Local or RADIUS) - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 736
Managed Switch CLI Manual, Release 8.0 Format Mode no redirect Captive Portal Instance mode redirect-url Use this command to configure the redirect URL for a captive portal configuration. The url - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 737
Managed Switch CLI Manual, Release 8.0 Default Format Mode 0 max-bandwidth-up Captive Portal Instance mode no max-bandwidth-up Use this command to reset the maximum rate to - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 738
Managed Switch CLI Manual, Release 8.0 max-output-octets Use this command to configure the maximum number of octets the user is allowed to receive. After this limit has been - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 739
Managed Switch CLI Manual, Release 8.0 Format Mode max-total-octets Captive Portal Instance mode session-timeout (Captive Portal) Use this command to configure the session timeout for a captive - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 740
Managed Switch CLI Manual, Release 8.0 Format Mode no idle-timeout Captive Portal Instance mode locale This command is not intended to be a user command. The administrator must use the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 741
Managed Switch CLI Manual, Release 8.0 Format Mode no interface Captive Portal Instance Config mode block Use this command to block all traffic for a captive portal configuration. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 742
Managed Switch CLI Manual, Release 8.0 Format Mode show captive-portal configuration Privileged EXEC mode Term Definition CP ID CP Name The captive portal ID The captive portal instance - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 743
Managed Switch CLI Manual, Release 8.0 Term Definition CP ID The captive portal ID. CP Name The captive portal name. Interface The interface associated with the CP ID Interface Description - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 744
Managed Switch CLI Manual, Release 8.0 show captive-portal configuration status Use this command to display information about all configured captive portal configurations or about a specific captive portal configuration. The - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 745
Managed Switch CLI Manual, Release 8.0 Example (switch)#show captive-portal configuration status CP ID CP Name Mode Protocol Verification 1 cp1 Enable https Guest 2 cp2 Enable http Local 3 cp3 Disable - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 746
Managed Switch CLI Manual, Release 8.0 show captive-portal trapflags Use this command to display status Privileged EXEC mode Term Definition Client MAC Address Client IP Address Protocol The MAC address of the authenticated user The IP address of the authenticated user The protocol the user is - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 747
Managed Switch CLI Manual, Release 8.0 If the macaddr is specified, the following terms are of the client who is authenticated. Example (switch)#show captive-portal client status Client MAC Address Client IP Address Protocol 0002.BC00.1290 0002.BC00.1291 0002.BC00.1292 10.254.96.47 10.254. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 748
Managed Switch CLI Manual, Release 8.0 Term Definition Client MAC address Bytes Received The MAC address of the authenticated client Address IP Address Definition Interface on which the clients are authenticated. The interface description The MAC address of the authenticated user. The IP address - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 749
Managed Switch CLI Manual, Release 8.0 Term Verification Definition The user verification mode Example (switch)#show captive-portal interface client status Client Client Intf Intf Description MAC Address IP Address ------ - 1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit 0002.BC00. - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 750
Switch CLI Manual, Release 8.0 If the CP ID is specified, the following terms are displayed. Term Interface Description Definition The description of the interace Example (switch)#show captive-portal configuration client status CP ID CP Name Client MAC Address Client IP Address Interface - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 751
Managed Switch CLI Manual, Release 8.0 Format Mode show captive-portal interface configuration [ ] status Privileged EXEC mode Term CP ID CP Name Interface Interface Description Type Definition The captive - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 752
Managed Switch CLI Manual, Release 8.0 Format Mode user user-id password { password | encrypted enc-password } Captive Portal Configuration mode no user Use this command to delete a user from the - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 753
Managed Switch CLI Manual, Release 8.0 no user group Use this command to dis-associate a group and user. Format Mode no user group Captive Portal Configuration mode user - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 754
Managed Switch CLI Manual, Release 8.0 no user idle-timeout Use this command to reset the idle timeout to the default value. Format Mode no user idle-timeout timeout - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 755
Managed Switch CLI Manual, Release 8.0 no user max-bandwidth-up Use this command to reset the limit to the default. Format Mode no user max-bandwidth-up Captive - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 756
Managed Switch CLI Manual, Release 8.0 no user max-output-octets Use this command to reset the limit to the default. Default Format Mode 0 no user max-output-octets - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 757
Managed Switch CLI Manual, Release 8.0 Format Mode show captive-portal user [ ] Privileged EXEC mode Term User ID User Name Session Timeout Idle Timeout Group ID Group Name Definition - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 758
Managed Switch CLI Manual, Release 8.0 User ID ------1 2 User Name user123 user234 Session Timeout -------- 10 0 Idle Timeout -------- 13 0 Group ID -------- 1 1 (switch)#show captive-portal user 1 User ID 1 User Name user123 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 759
Managed Switch CLI Manual, Release 8.0 Default Format Mode 1 user group Captive Portal Configuration mode no user group Use this command to delete a user group. The default user group (1) - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 760
Managed Switch CLI Manual, Release 8.0 Chapter 13 List of Commands {deny | permit} (IP ACL) ...8-40 {deny | permit} (IPv6) ...8-45 {deny | permit} (MAC ACL) ...8-34 1583compatibility ...4-41 aaa authentication dot1x ...10-39 aaa authentication login ...10-37 aaa authenticaton enable ...10-38 access - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 761
Managed Switch CLI Manual, Release 8.0 area virtual-link dead-interval (OSPF) ...4-47 area virtual-link dead-interval (OSPFv3) ...7-43 area virtual-link hello-interval (OSPF) ...4-48 area virtual-link - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 762
Managed Switch CLI Manual, Release 8.0 captive-portal client deauthenticate ...12-23 captive-portal ...12-1 capture wrap ...9-62 class ...8-21 class-map ...8-10 class-map rename ...8-11 classofservice dot1p-mapping ...8-2 classofservice ip-dscp-mapping ...8-2 classofservice trust ...8-3 clear arp- - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 763
CLI Manual, Release -5 conform-color ...8-21 copy ...9-32 copy (pre-login banner) ...10-73 cos-queue min-bandwidth ...8-4 cos ip acl ...9-68 debug ip dvmrp packet ...9-68 debug ip igmp packet ...9-69 debug ip mcache packet ...9-69 debug ip pimdm packet ...9-70 debug ip pimsm packet ...9-71 debug ip - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 764
Managed Switch CLI Manual, Release 8.0 debug ipv6 pimdm packet ...9-73 debug ipv6 pimsm packet ...9-73 OSPF) ...4-53 default-metric (OSPFv3) ...7-48 default-metric (RIP) ...4-84 default-router ...9-42 delete ...9-4 deleteport (Global Config) ...3-92 deleteport (Interface Config) ...3-92 description - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 765
Managed Switch CLI Manual, Release 8.0 dos-control icmpv6 ...3-202 dos-control l4port ...3-195 dos-control sipdip ...3-193 dos-control smacdmac ...3-196 dos-control tcpfinurgpsh ...3-200 dos-control tcpflag ...3-195 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 766
access-list ...8-39 ip access-list rename ...8-40 ip address ...4-9 ip arp inspection filter ...3-134 ip arp inspection limit ...3-133 ip arp inspection trust ...3-133 ip arp inspection validate ...3-132 ip arp inspection vlan ...3-131 ip arp inspection vlan logging ...3-132 ip dhcp bootp automatic - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 767
Manual, Release 8.0 ip dhcp snooping vlan ...3-120 ip domain list ...9-56 ip domain lookup ...9-55 ip domain name ...9-56 ip domain retry ...9-58 ip domain timeout ...9-59 ip dvmrp ...5-8 ip dvmrp metric ...5-7 ip dvmrp trapflags ...5-8 ip dvmrp(Global Config) ...5-7 ip helper-address ...4-37 ip - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 768
Switch CLI Manual, Release 8.0 ip igmp-proxy unsolicit-rprt-interval ...5-35 ip igmpsnooping unknown-multicast ...3-145 ip irdp ...4-20 ip irdp address ...4-21 ip irdp holdtime ...4-21 ip irdp maxadvertinterval ...4-22 ip irdp minadvertinterval ...4-22 ip irdp preference ...4-23 ip mcast boundary - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 769
Switch CLI Manual, Release 8.0 ip proxy-arp ...4-2 ip redirects ...4-91 ip rip ...4-83 ip rip authentication ...4-85 ip rip receive version ...4-86 ip rip send version ...4-86 ip route ...4-9 ip route default ...4-10 ip route distance ...4-11 ip routing ...4-8 ip ssh ...10-16 ip ssh protocol - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 770
Manual, Release 8.0 ipv6 mld last-member-query-count ...6-19 ipv6 mld last-member-query-interval ...6-18 ipv6 mld query-interval ...6-17 ipv6 mld query-max-response-time ...6-18 ipv6 mld router ipv6 pimsm register-threshold ...6-10 ipv6 pimsm rp-address ...6-11 ipv6 pimsm rp-candidate ...6-12 ipv6 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 771
Managed Switch CLI Manual, Release 8.0 ipv6 router ospf ...7-38 ipv6 traffic-filter ...8-46 ipv6 unicast-routing ...7-11 ipv6 unreachables ...7-19 isdp advertise-v2 ...3-207 isdp enable ...3-208 isdp holdtime ...3-207 isdp run ...3- - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 772
Managed Switch CLI Manual, Release 8.0 ...9-21 logging persistent ...9-24 logging syslog ...9-21 login authentication ...10-9 logout ...9-29 mac access-group ip dscp ...8-15 match ip precedence ...8-16 match ip tos ...8-16 match ip6flowlbl ...8-14 match protocol ...8-17 match source-address - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 773
Managed Switch CLI Manual, Release 8.0 match srcl4port ...8-18 max-bandwidth-down ...12-9 max-bandwidth-up ... network area (OSPF) ...4-40 network ipv6 address ...7-2 network ipv6 enable ...7-2 network ipv6 gateway ...7-3 network javamode ...10-6 network mac-address ...10-5 network mac-type ...10-5 - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 774
Managed Switch CLI Manual, Release 8.0 permit ip host mac host ...3-135 ping ...9-29 ping ipv6 ...7-4 ping ipv6 -channel system priority ...3-109 port-security ...3-167 port-security mac-address ...3-168 port-security mac-address move ...3-169 port-security max-dynamic ...3-167 port-security max - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 775
82 router-id (OSPF) ...4-60 router-id (OSPFv3) ...7-52 routing ...4-8 save ...9-31 script apply ...10-72 script delete ...10-72 script list ...10-72 script show ...10-73 script validate ...10-73 serial baudrate ...10-8 serial timeout ...10-9 service dhcp ...9-49 service dhcpv6 ...7-69 service-policy - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 776
Managed Switch CLI Manual, Release 8.0 set igmp mrouter ...3-144 set igmp mrouter interface ...3-145 set igmp querier ...3-149 set igmp querier election participate ...3-151 set igmp querier query-interval ...3- - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 777
Managed Switch CLI Manual, Release 8.0 show captive-portal configuration locales 12-18 show captive- ip-dscp-mapping ...8-6 show classofservice ip-precedence-mapping 8-6 show classofservice trust ...8-7 show clock ...9-40 show diffserv ...8-27 show diffserv service ...8-30 show diffserv service - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 778
128 show ip dvmrp ...5-9 show ip dvmrp interface ...5-9 show ip dvmrp neighbor ...5-10 show ip dvmrp nexthop ...5-11 show ip dvmrp prune ...5-11 show ip dvmrp route ...5-12 show ip helper-address ...4-38 show ip http ...10-27 show ip igmp ...5-31 show ip igmp groups ...5-31 show ip igmp interface - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 779
Switch CLI Manual, Release 8.0 show ip mcast mroute group ...5-5 show ip mcast mroute source ...5-6 show ip ospf ...4-65 show ip ospf abr ...4-69 show ip ospf area ...4-69 show ip ospf asbr ...4-70 show ip ospf database ...4-71 show ip ospf database database-summary ...4-72 show ip ospf interface - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 780
Managed Switch CLI Manual, Release 8.0 show ip vrrp interface brief ...4-33 show ip vrrp interface stats ...4-31 show ipv6 access-lists ...8-47 show ipv6 brief ...7-20 show ipv6 dhcp ...7-73 show ipv6 dhcp binding ...7-76 show ipv6 dhcp - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 781
Managed Switch CLI Manual, Release 8.0 show ipv6 pimsm interface ...6-15 show ipv6 address-table gmrp ...3-64 show mac-address-table igmpsnooping ...3-148 show mac-address-table mldsnooping ...3-161 show mac-address-table multicast ...3-205 show mac-address-table static ...3-119 show mac-address - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 782
Managed Switch CLI Manual, Release 8.0 show mac-address-table stats ...3-206 show mac-addr-table ...9-12 show show running-config ...9-15 show running-config interface ...9-16 show serial ...10-10 show service-policy ...8-32 show sflow agent ...9-87 show sflow pollers ...9-87 show sflow receivers - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 783
Managed Switch CLI Manual, Release 8.0 show slot ...2-6 show snmpcommunity ...10-50 show snmptrap show tech-support ...9-17 show telnet ...10-15 show telnetcon ...10-16 show terminal length ...9-18 show trapflags ...10-51 show users ...10-32 show users accounts ...10-33 show users login-history ... - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 784
Managed Switch CLI Manual, Release 8.0 show voice vlan ...3-50 shutdown ...3-6 shutdown all ...3-6 slot ...2-4 snmp trap link-status ...10-48 snmp trap link-status all ...10-49 snmp-server ...10- - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 785
Managed Switch CLI Manual, Release 8.0 spanning-tree forward-time ...3-15 spanning-tree guard ...3-16 spanning-tree max-age ...3-16 spanning-tree max-hops ...3-17 spanning-tree mst ...3-17 spanning- - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 786
Managed Switch CLI Manual, Release 8.0 switchport protected (Interface Config) ...3-53 tacacs-server host ...10-67 tacacs-server key ...10-68 tacacs-server timeout ...10-68 telnet ...10-11 telnetcon - Netgear GSM7328Sv2 | 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 787
Managed Switch CLI Manual, Release 8.0 username snmpv3 encryption ...10-32 verification ...12-7 vlan ...3-32 vlan acceptframe ...3-32 vlan association mac ...3-42 vlan association subnet ...3-41 vlan database ...3-31 vlan
202-10528-01
July 2009
NETGEAR
, Inc.
350 East Plumeria Drive
San Jose, CA 95134
ProSafe 7300S Managed
Switches CLI Manual,
Version 8.0