Netgear GSM7328Sv2 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 472

Managed Switch CLI Manual, Release 8.0 Term Definition Retransmit Interval Hello Interval Dead Interval LSA Ack Interval Iftransit Delay Interval Authentication Type Metric Cost Passive Status OSPF MTUignore The frequency, in seconds, at which the interface sends LSA. The frequency, in seconds, at which the interface sends Hello packets. The amount of time, in seconds, the interface waits before assuming a neighbor is down. The amount of time, in seconds, the interface waits before sending an LSA acknowledgement after receiving an LSA. The number of seconds the interface adds to the age of LSA packets before transmission. The type of authentication the interface performs on LSAs it receives. The priority of the path. Low costs have a higher priority than high costs. Shows whether the interface is passive or not. Shows whether to ignore MTU mismatches in database descriptor packets sent from neighboring routers. The following information only displays if OSPF is initialized on the interface: Term Definition OSPF Interface Broadcast LANs, such as Ethernet and IEEE 802.5, take the value broadcast. The OSPF Type Interface Type will be 'broadcast'. State The OSPF Interface States are: down, loopback, waiting, point-to-point, designated router, and backup designated router. Designated Router The router ID representing the designated router. Backup Designated Router The router ID representing the backup designated router. Number of Link The number of link events. Events Metric Cost The cost of the OSPF interface. show ipv6 ospf interface brief This command displays brief information for the IFO object or virtual interface tables. IPv6 Commands v1.0, July 2009 7-62