Netgear GSM7328Sv2 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 458

Managed Switch CLI Manual, Release 8.0 default-metric (OSPFv3) This command is used to set a default for the metric of distributed routes. Format Mode default-metric Router OSPFv3 Config no default-metric (OSPFv3) This command is used to set a default for the metric of distributed routes. Format Mode no default-metric Router OSPFv3 Config distance ospf (OSPFv3) This command sets the route preference value of OSPF route types in the router. Lower route preference values are preferred when determining the best route. The type of OSPF route can be intra, inter, or external. All the external type routes are given the same preference value. The range of value is 1 to 255. Default Format Mode 110 distance ospf {intra-area | inter-area | external } Router OSPFv3 Config no distance ospf(OSPFv3) This command sets the default route preference value of OSPF routes in the router. The type of OSPF route can be intra, inter, or external. All the external type routes are given the same preference value. Format Mode no distance ospf {intra-area | inter-area | external} Router OSPFv3 Config IPv6 Commands v1.0, July 2009 7-48