Netgear GSM7328Sv2 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 477

Managed Switch CLI Manual, Release 8.0 show ipv6 ospf stub table This command displays the OSPF stub table. The information below will only be displayed if OSPF is initialized on the switch. Format Modes show ipv6 ospf stub table • Privileged EXEC • User EXEC Term Definition Area ID A 32-bit identifier for the created stub area. Type of Service Type of service associated with the stub metric. For this release, Normal TOS is the only supported type. Metric Val The metric value is applied based on the TOS. It defaults to the least metric of the type of service among the interfaces to other areas. The OSPF cost for a route is a function of the metric value. Import Controls the import of summary LSAs into stub areas. Summary LSA show ipv6 ospf virtual-link This command displays the OSPF Virtual Interface information for a specific area and neighbor. The parameter identifies the area and the parameter identifies the neighbor's Router ID. Format Modes show ipv6 ospf virtual-link • Privileged EXEC • User EXEC Term Area ID Neighbor Router ID Hello Interval Definition The area id of the requested OSPF area. The input neighbor Router ID. The configured hello interval for the OSPF virtual interface. IPv6 Commands v1.0, July 2009 7-67