Netgear GSM7328Sv2 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 281

Managed Switch CLI Manual, Release 8.0 show ip vrrp interface This command displays all configuration information and VRRP router statistics of a virtual router configured on a specific interface. Use the output of the command to verify the track interface and track IP route configurations. Format Modes show ip vrrp interface { | vlan } • Privileged EXEC • User EXEC Term Definition Primary IP Address The configured IP address for the Virtual router. VMAC address Authentication type The VMAC address of the specified router. The authentication type for the specific virtual router. Priority The priority value for the specific virtual router, taking into account any priority decrements for tracked interfaces or routes. Configured Priority The priority configured through the ip vrrp priority command. Advertisement The advertisement interval in seconds for the specific virtual router. interval Pre-Empt Mode The preemption mode configured on the specified virtual router. Administrative The status (Enable or Disable) of the specific router. Mode State The state (Master/backup) of the virtual router. The following shows example CLI display output for the command. show ip vrrp interface Primary IP Address 1.1.1.5 VMAC Address 00:00:5e:00:01:01 Authentication Type None Priority 80 Configured priority 100 Advertisement Interval (secs 1 Pre-empt Mode Enable Administrative Mode Enable State Initialized Track Interface State ------ DecrementPriority Routing Commands v1.0, July 2009 4-33