Netgear GSM7328Sv2 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 19

Managed Switch CLI Manual, Release 8.0 Table 5. CLI Command Modes (continued) Command Mode Prompt Router OSPFv3 Config Switch (Config rtr)# Router RIP Config Switch (Config-router)# Router BGP Config Switch (Config-router)# MAC Access-list Switch (Config-mac-access-list)# Config TACACS Config Switch (Tacacs)# DHCP Pool Config DHCPv6 Pool Config Switch (Config dhcp-pool)# Switch (Config dhcp6-pool)# Mode Description Contains the OSPFv3 configuration commands. Contains the RIP configuration commands. Contains the BGP4 configuration commands. Allows you to create a MAC Access-List and to enter the mode containing MAC Access-List configuration commands. Contains commands to configure properties for the TACACS servers. Contains the DHCP server IP address pool configuration commands. Contains the DHCPv6 server IPv6 address pool configuration commands. Stack Global Config Mode ARP Access-List Config Mode Switch (Config stack)# Switch (Config-arp-access-list)# Table 6 explains how to enter or exit each mode. Allows you to access the Stack Global Config Mode. Contains commands to add ARP ACL rules in an ARP Access List. Table 6. CLI Mode Access and Exit Command Mode Access Method Exit or Access Previous Mode User EXEC Privileged EXEC Global Config VLAN Config Interface Config This is the first level of access. To exit, enter logout. From the User EXEC mode, enter To exit to the User EXEC mode, enter exit or enable. press Ctrl-Z. From the Privileged EXEC mode, To exit to the Privileged EXEC mode, enter exit, enter configure. or press Ctrl-Z. From the Privileged EXEC mode, To exit to the Privileged EXEC mode, enter exit, enter vlan database. or press Ctrl-Z. From the Global Config mode, enter interface or interface loopback or interface tunnel To exit to the Global Config mode, enter exit. To return to the Privileged EXEC mode, enter CtrlZ. Using the Command-Line Interface 1-7 v1.0, July 2009