Netgear GSM7328Sv2 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 326

Managed Switch CLI Manual, Release 8.0 Term State Dead Time Definition The state of the neighboring routers. Possible values are: • Down - initial state of the neighbor conversation - no recent information has been received from the neighbor. • Attempt - no recent information has been received from the neighbor but a more concerted effort should be made to contact the neighbor. • Init - an Hello packet has recently been seen from the neighbor, but bidirectional communication has not yet been established. • 2 way - communication between the two routers is bidirectional. • Exchange start - the first step in creating an adjacency between the two neighboring routers, the goal is to decide which router is the master and to decide upon the initial DD sequence number. • Exchange - the router is describing its entire link state database by sending Database Description packets to the neighbor. • Loading - Link State Request packets are sent to the neighbor asking for the more recent LSAs that have been discovered (but not yet received) in the Exchange state. • Full - the neighboring routers are fully adjacent and they will now appear in router-LSAs and network-LSAs. The amount of time, in seconds, to wait before the router assumes the neighbor is unreachable. If you specify an IP address for the neighbor router, the following fields display: Term Definition Interface Neighbor IP Address Interface Index Area ID Valid unit, slot, and port number separated by forward slashes. The IP address of the neighbor router. The interface ID of the neighbor router. The area ID of the OSPF area associated with the interface. Options An integer value that indicates the optional OSPF capabilities supported by the neighbor. The neighbor's optional OSPF capabilities are also listed in its Hello packets. This enables received Hello Packets to be rejected (i.e., neighbor relationships will not even start to form) if there is a mismatch in certain crucial OSPF capabilities. Router Priority The OSPF priority for the specified interface. The priority of an interface is a priority integer from 0 to 255. A value of '0' indicates that the router is not eligible to become the designated router on this network. Dead Timer Due The amount of time, in seconds, to wait before the router assumes the neighbor is unreachable. Up Time Neighbor uptime; how long since the adjacency last reached the Full state. State Events The state of the neighboring routers. The number of times this neighbor relationship has changed state, or an error has occurred. Routing Commands v1.0, July 2009 4-78