Netgear MBR1516 User Manual - Page 24
Wireless Settings, To view or change basic wireless settings, Wireless, Apply
View all Netgear MBR1516 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Mobile LTE Broadband 11n Wireless Router MBR1516 Wireless Settings The Wireless Settings screen lets you view or configure the wireless network setup. The Mobile LTE Broadband 11n Wireless Router comes with preset security. This means that the WiFi network name (SSID), network key (password), and security option (encryption protocol) are preset in the factory. You can find the preset SSID and password on the bottom of the unit. Note: The preset SSID and password are uniquely generated for every device to protect and maximize your wireless security. ¾ To view or change basic wireless settings: NETGEAR recommends that you do not change your preset security settings. If you do decide to change your preset security settings, make a note of the new settings and store it in a safe place where you can easily find it. If you use a wireless computer to change the wireless network name (SSID) or other wireless security settings, you are disconnected when you click Apply. To avoid this problem, use a computer with a wired connection to access the router. 1. On the BASIC Home screen, select Wireless to display the Wireless Settings screen. The screen sections, settings, and procedures are explained in the following sections. 2. Make any changes that are needed, and click Apply to save your settings. 3. Set up and test your wireless devices and computers to make sure that they can connect wirelessly. If they do not, check the following: NETGEAR genie BASIC Settings 24