Netgear MBR1516 User Manual - Page 99

Mobile LTE Broadband 11n Wireless Router MBR1516 Factory Default Settings Use the Restore Factory Settings button located on the bottom of your router to reset all settings to their original factory default settings. This is called a hard reset. To perform a hard reset, press and hold the Restore Factory Settings button for 6 seconds. Your router returnx to the factory configuration settings that are shown in the following table. Feature Router login User login URL User name (case-sensitive) Login password (case-sensitive) Internet WAN MAC address connection WAN MTU size Port speed Local network (LAN) LAN IP Subnet mask RIP direction RIP version RIP authentication DHCP server DHCP starting IP address DHCP ending IP address DMZ Time zone Daylight saving time adjustment Firewall Inbound communication from the Internet Outbound communication to the Internet) Source MAC filtering Default Behavior http://192.168.0.1 admin password Use default address 1500 AutoSense www.routerlogin.net 255.255.255.0 None Disabled None Enabled 192.168.0.2 192.168.0.254 Disabled PST for North America Enabled Disabled (except traffic on port 80, the HTTP port) Enabled (all) Disabled Supplemental Information 99