Netgear MBR1516 User Manual - Page 57
Modem SW version, Wireless Broadband Port
View all Netgear MBR1516 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Mobile LTE Broadband 11n Wireless Router MBR1516 • Mobile Broadband Modem. This shows the properties of the mobile broadband modem. - Modem Identity. Shows the modem in use. - Modem SW version. The software version of the modem. - Modem driver version. The driver version of the modem. - IMEI. International Mobile Equipment Identity. The unique identity of the modem. - Operator. The ISP for the broadband wireless network. - Network mode. The mode of the current network the modem is connected to. This is dependent on coverage and distance from the cell site. • Wireless Broadband Port. The current settings of mobile broadband port. - Connection Status. This shows the status of the wireless broadband connection. - IP Address. The IP address being used by the Internet (WAN) port of the router. If no address is shown or the address is 0.0.0, the router cannot connect to the Internet. - Protocol. This shows if the router is using a fixed IP address on the WAN. If the value is DHCP Client, the router obtains an IP address dynamically from the ISP. - IP Subnet Mask. The IP subnet mask being used by the Internet (WAN) port of the router. - Domain Name Server. The Domain Name Server addresses being used by the router. A Domain Name Server translates human-language URLs such as www.netgear.com into IP addresses. • LAN Port. These are the current settings, as set in the LAN Setup screen. - MAC Address. The Media Access Control address. This is the unique physical address being used by the Ethernet (LAN) port of the router. - IP Address. The IP address being used by the Ethernet (LAN) port of the router. The default is 192.168.0.1. - DHCP. Identifies whether the router's built-in DHCP server is active for the LAN-attached devices. - IP Subnet Mask. The subnet mask associated with the LAN IP address. • Wireless Port. These are the current settings, as set in the Wireless Settings screen. - Name (SSID). The SSID of the router. - Region. The location (country). - Channel. The current channel in use. - Wireless AP. Indicates if the access point feature of the router is enabled or not. If not enabled, the WiFi LED on the front panel is off. - Broadcast Name. Indicates if the router is broadcasting its SSID. Administration 57