Netgear WNDRMAC WNDRMAC User Manual - Page 18
Manual Method, Wi-Fi Protected Setup (WPS) Method, To use WPS to join the wireless network - repeater
View all Netgear WNDRMAC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
N600 Wireless Dual Band Gigabit Router WNDRMAC Manual Method 1. Open the software that manages your wireless connections on the wireless device (laptop computer, gaming device, iPhone) that you want to connect to your router. This software scans for all wireless networks in your area. 2. Look for your network and select it. If you did not change the name of your network during the setup process, look for the default Wi-Fi network name (SSID) and select it. The default SSID is located on the product label on the bottom of the router. 3. Enter the router password and click Connect. The default router passphrase is located on the product label on the bottom of the router. 4. Repeat steps 1-3 to add other wireless devices. Wi-Fi Protected Setup (WPS) Method Wi-Fi Protected Setup (WPS) is a standard for easily adding computers and other devices to a home network while maintaining security. To use WPS, make sure that all wireless devices to be connected to the network are Wi-Fi certified and support WPS. During the connection process, the client gets the security settings from the router so that every device in the network has the same security settings. To use WPS to join the wireless network: If your wireless device supports WPS (Push 'N' Connect), follow these steps: 1. Press the WPS button on the router front panel . 2. Within 2 minutes, press the WPS button on your wireless device or follow the WPS instructions that came with the device. The device is now connected to your router. 3. Repeat steps 1-2 to add other WPS wireless devices. Getting Started with NETGEAR Genie 18