Nokia 002B9M3 User Guide - Page 122
Phone IP address, Primary DNS address
UPC - 758478010891
View all Nokia 002B9M3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Settings Phone IP address (for IPv4 only)-Enter the IP address of your device. DNS address-In Primary DNS address, enter the IP address of the primary DNS server. In Secondary DNS address, enter the IP address of the secondary DNS server. Contact your internet service provider to obtain these addresses. Proxy server address-Define the address for the proxy server. Proxy port number-Enter the proxy port number. Wireless LAN access points Follow the instructions from the wireless LAN service provider. WLAN network name-Select Enter manually or Search for networks. If you select an existing network, WLAN network mode and WLAN security mode are determined by the settings of its access point device. Network status-Defines whether the target network is hidden or not. WLAN network mode-Select Ad-hoc to create an ad hoc network and to allow devices to send and receive data directly; a wireless LAN access point device is not needed. In an ad-hoc network, all devices must use the same WLAN network name. WLAN security mode-Select the encryption used: WEP, 802.1x (not for ad hoc networks), or WPA/WPA2. If you select Open network, no encryption is used. The WEP, 802.1x, and WPA functions can be used only if the network supports them. WLAN security settings-Enter the settings for the selected security mode: Security settings for WEP: • Wep key in use-Select the WEP key number. You can create up to four WEP keys. The same settings must be entered on the wireless LAN access point device. • Authentication type-Select Open or Shared for the authentication type between your device and the wireless LAN access point device. • WEP key settings-Enter WEP encryption (length of the key), WEP key format (ASCII or Hexadecimal), and WEP key (the WEP key data in the selected format). Security settings for 802.1x and WPA/WPA2: • WPA/WPA2-Select the means of authentication: EAP to use an extensible authentication protocol (EAP) plug-in, or Pre-shared key to use a password. Complete the appropriate settings: • EAP plug-in settings (only for EAP)-Enter the settings as your service provider instructs. 122