NordicTrack 360 Canadian English Manual - Page 10

8. Route the Press Arm Cable (66) over a 3 1/2" Pulley (43). Attach the Pulley and a Cable Trap 8 (47) to the Top Frame (12) with an M10 x 40mm Screw (97). Make sure that the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 12 66 47 43 97 9. Route the Press Arm Cable (66) through the Top Cover (24) and over a 3 1/2" Pulley (43). 9 Attach the Pulley and a Cable Trap (47) to the Top Frame (12) with an M10 x 40mm Screw (97). Make sure that the Cable Trap is orient- ed to hold the Cable in the groove of the Pulley. 24 12 66 43 47 97 10. Route the Press Arm Cable (66) under a 3 1/2" 10 Pulley (43). Attach the Pulley, a Cable Trap (47), and two Finger Guards (48) to the second hole from the top of the Weight Tube (16) with an M10 x 50mm Bolt (96) and an M10 Locknut (108). Make sure that the Cable Trap is ori- ented to hold the Cable in the groove of the Pulley. 66 16 48 108 47 96 48 43 10