NordicTrack 360 Canadian English Manual - Page 11

11. Route the Press Arm Cable (66) over a 3 1/2" Pulley (43). Attach the Pulley and a Cable Trap 11 (47) to the Top Frame (12) with an M10 x 40mm Screw (97). Make sure that the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 47 43 97 66 12 12. Route the Press Arm Cable (66) through the Top Cover (24) and over a 3 1/2" Pulley (43). 12 Attach the Pulley and a Cable Trap (47) to the Top Frame (12) with an M10 x 40mm Screw (97). Make sure that the Cable Trap is orient- ed to hold the Cable in the groove of the Pulley. 24 47 43 12 97 66 13. Use the wire in the Right Press Arm (8) to pull the Press Arm Cable (66) down through the 13 Press Arm. Make sure that the Cable is rout- ed around the pulleys above the Press Arm as shown in the inset drawing. Hold a 4" Pulley (42) over the Press Arm Cable (66). Attach the Pulley inside of the Swivel Arm (26) with an M10 x 50mm Button Bolt (88), two M10 Washers (105), two 16mm x 6mm Spacers (11), and an M10 Locknut (108). 66 8 88 105 11 42 66 105 108 11 26 11