Oki C3600n C3600n User Guide (English) - Page 63
Color menu, for special or particularly difficult print jobs. Settings revert
View all Oki C3600n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Color menu The printer automatically adjusts color balance and density at appropriate intervals, optimizing the printed output for bright white paper viewed in natural daylight conditions. The items on this menu provide a means of changing the default settings for special or particularly difficult print jobs. Settings revert to their default values when the next print job is complete. COLOR MENU ITEM DENSITY CONTROL ADJUSTMENT MODE SETTINGS AUTO MANUAL CMYK ON CONVERSION OFF CMY 100% DENSITY DISABLE ENABLE UCR LOW MEDIUM HIGH INK SIMULATION DENSITY ADJUSTMENT OFF SWOP EUROSCALE JAPAN EXECUTE EXPLANATION If set to AUTO, image density will be automatically adjusted at power on, when a new image drum or toner cartridge is installed, and at intervals of 100, 300 and 500 drum counts. If a 500 drum count interval occurs during a print job it will occur at the end of that job, and will take up to 55 seconds. If set to MANUAL, this adjustment will only be performed when initiated by the next menu item. To simplify the conversion process of CMYK data and reduce processing time, set to OFF. Notes: This setting is ignored when Ink Simulation is used. This setting only applies to PS models. When enabled, black areas are produced using 100% C, M, and Y instead of black. This results in a glossier finish. Selects a limitation of the toner layer thickness. If paper curling occurs in dark printing, selecting MEDIUM or LIGHT may reduce curling. Selects from a range of industrystandard color swatches. Note: This setting only applies to PS models. Selecting this will perform the auto density set up immediately. C3600n User's Guide 63