Oki C3600n C3600n User Guide (English) - Page 87

If the drum unit needs to be out of the printer for longer

Page 87 highlights

3. Holding it by its top center, lift the image drum, complete with its toner cartridge, up and out of the printer. ID going out_Fig1_12.jpg 4. Put the old unit down gently onto a piece of paper to prevent toner from marking your furniture. 5. Take the new image drum unit, complete with toner cartridge (assembled according to the installation guide) and place it on the piece of paper where the old ID unit was placed. CAUTION! The green image drum surface at the base of the cartridge is very delicate and light sensitive. Do not touch it and do not expose it to normal room light for more than 5 minutes. If the drum unit needs to be out of the printer for longer than this, please wrap the cartridge inside a black plastic bag to keep it away from light. Never expose the drum to direct sunlight or very bright room lighting. C3600n User's Guide 87

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141

C3600n User’s Guide
87
3.
Holding it by its top center, lift the image drum, complete with its
toner cartridge, up and out of the printer.
ID going out_Fig1_12.jpg
4.
Put the old unit down gently onto a piece of paper to prevent
toner from marking your furniture.
5.
Take the new image drum unit, complete with toner cartridge
(assembled according to the installation guide) and place it on
the piece of paper where the old ID unit was placed.
CAUTION!
The green image drum surface at the base of the cartridge
is very delicate and light sensitive. Do not touch it and do
not expose it to normal room light for more than 5 minutes.
If the drum unit needs to be out of the printer for longer
than this, please wrap the cartridge inside a black plastic
bag to keep it away from light. Never expose the drum to
direct sunlight or very bright room lighting.