Oki C3600n C3600n User Guide (English) - Page 89
Replacing the belt unit, Switch off the printer and allow the fuser to cool for about
View all Oki C3600n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Replacing the belt unit The belt unit is located under the four image drums. This unit requires replacement approximately every 60,000 pages. WARNING! If the printer has been powered on, the fuser will be hot. This area is clearly labelled. Do not touch. Switch off the printer and allow the fuser to cool for about 10 minutes before opening the cover. 1. Press the cover release and open the printer's top cover fully. cover open button_F5_23.jpg 2. Note the positions of the 4 cartridges. It is essential that they go back in the same order. ID Positions_Fig1_04.jpg 1. Cyan cartridge 3. Yellow cartridge 1 2 3 4 2. Magenta cartridge 4. Black cartridge C3600n User's Guide 89
C3600n User’s Guide
89
Replacing the belt unit
The belt unit is located under the four image drums. This unit
requires replacement approximately every 60,000 pages.
Switch off the printer and allow the fuser to cool for about
10 minutes before opening the cover.
1.
Press the cover release and open the printer’s top cover fully.
cover open button_F5_23.jpg
2.
Note the positions of the 4 cartridges. It is essential that they go
back in the same order.
ID Positions_Fig1_04.jpg
WARNING!
If the printer has been powered on, the fuser will be hot.
This area is clearly labelled. Do not touch.
1. Cyan cartridge
2. Magenta cartridge
3. Yellow cartridge
4. Black cartridge
1
2
3
4