Olympus E-420 E-420 Instruction Manual (English) - Page 50

Menu MENU[X][AE BKT] AE BKT AE BKT OFF 3F 0.3EV 3F 0.7EV 3F 1.0EV CANCEL SELECT GO Start shooting. • In single-frame shooting, the exposure changes every time the shutter button is pressed. • In sequential shooting, hold down the shutter button until the selected number of frames are taken. • Releasing the shutter button stops auto bracketing shooting. When it stops, 0 is displayed in green on the super control panel. 4 Viewfinder How AE bracketing compensates exposure in each shooting mode The exposure value for the next shot is displayed during shooting. Exposure Depending on the selected shooting mode, exposure is compensated in the following way: P mode : Aperture value and shutter speed A mode : Shutter speed S mode : Aperture value M mode : Shutter speed  TIPS To apply AE bracketing to the exposure value you have compensated: j Compensate the exposure value, then use the AE bracketing feature. AE bracketing is applied to the exposure value you have compensated. ISO sensitivity setting The higher the ISO value, the greater the camera's light sensitivity and the better its ability to shoot in low light conditions. However, higher values may give pictures a grainy appearance. Super control panel ip: [ISO] Menu MENU[W][ISO] ISO [AUTO] : The sensitivity is set automatically according to the shooting conditions. With the [ISOAUTO SET] setting, you can set the maximum ISO that is set automatically. g"ISO-AUTO SET" (P. 87) [100 - 1600]: Fixed ISO sensitivity. OFF arge Normal  TIPS To automatically set the optimal ISO in M mode: j Normally, the AUTO setting is not available in M mode, but you can set it for use in all shooting modes. g"ISO-AUTO" (P. 87) 50 EN