Olympus FE 115 FE-115 Advanced Manual (English) - Page 66
If an error code is displayed, Monitor indication, Possible cause, Corrective action
UPC - 050332157743
View all Olympus FE 115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Direct printing (PictBridge) If an error code is displayed If an error code is displayed on the camera's monitor during direct print setting or printing, see the following table. For more details, refer to the printer's instruction manual. Monitor indication NO CONNECTION NO PAPER Possible cause Corrective action The camera is not connected Disconnect the camera and to the printer correctly. connect it again correctly. There is no paper in the printer. Load some paper in the printer. NO INK The printer has run out of Replace the ink cartridge in ink. the printer. JAMMED The paper is jammed. Remove the jammed paper. 6 SETTINGS CHANGED The printer's paper cassette has been removed or the printer configuration has been changed. Do not reconfigure the printer after the settings have been made. Turn off the camera and There is a problem with the printer. Check the printer and PRINT ERROR printer and/or camera. remedy any problems before turning the power on again. TIPS • If an error code other than those shown above is displayed, see "Error codes" (P. 89). Printing pictures 66