Olympus Stylus 7000 Silver STYLUS-7000 Instruction Manual (English) - Page 28

Reducing the blur caused by the camera shake when shooting [IMAGE STABILIZER] (still images) / [DIS MOVIE MODE] (movies) B CAMERA MENU X IMAGE STABILIZER / DIS MOVIE MODE : K s I A When set to [ON], [ESP/n] (p. 27) is automatically fixed to [ESP], and [AF MODE] (p. 27) is automatically fixed to [FACE DETECT]. Selecting a scene mode according to the shooting situation [J SCENE MODE] J SCENE MODE Submenu 2 OFF ON Application The image stabilizer is deactivated. This is recommended for shooting when the camera is fixed in place on a tripod or other stable surface. The image stabilizer is activated. The camera's default settings are [IMAGE STABILIZER] (still images) to [ON] and [DIS MOVIE MODE] (movies) to [OFF]. There may be a noise coming from inside the camera when the shutter button is pressed with [IMAGE STABILIZER] (still images) set to [ON]. Images may not be stabilized if camera shake is too severe. When the shutter speed is extremely slow, such as when taking still shots or taking pictures at night, the stabilizer may not be as effective. When shooting while the [DIS MOVIE MODE] (movie) is set to [ON], the image will be enlarged somewhat before saving. : s In s mode, the optimum shooting settings are pre-programmed for specific shooting scenes. For this reason, settings may not be changed in some modes. Submenu 1 B PORTRAIT/ F LANDSCAPE/ G NIGHT SCENE*1/ M NIGHT+PORTRAIT/ C SPORT/N INDOOR/ W CANDLE/ R SELF PORTAIT/ S SUNSET*1/ X FIREWORKS*1/V CUISINE/ d DOCUMENTS/ N SMILE SHOT*2/ q BEACH & SNOW/ Y PRE-CAPTURE MOVIE Application The camera takes a picture using the optimum settings for the scene conditions. *1 When the subject is dark, noise reduction is automatically activated. This approximately doubles the shooting time, during which no other pictures can be taken. *2 The focus is locked at the first frame. Brightening the subject against backlight [SHADOW ADJ] B CAMERA MENU X SHADOW ADJ : K s I A Submenu 2 OFF ON Application Shoots without using [SHADOW ADJ]. The camera finds a person's face that has been darkened by backlight and makes it appear brighter for taking the picture. (Point the camera toward the subject. Check the frame that appears around the face detected by the camera, and then press the shutter button to take the picture.) For some subjects, the frame may not appear or may take some time to appear. Shooting with a selected scene "Using the best shooting mode for the scene (s mode)" (p. 17) Detecting a smiling face to release the shutter automatically ([N SMILE SHOT] mode) 1 Select [N SMILE SHOT], and aim the camera toward the subject. ● The self-timer lamp turns on. When a smiling face is detected, the camera automatically takes 3 sequential shots. Pictures can also be taken manually by pressing the shutter button. The camera may not be able to detect a smiling face for some subjects. [IMAGE SIZE] is limited to [I] or lower. 28 EN