Olympus Stylus 7000 Silver STYLUS-7000 Instruction Manual (English) - Page 39

Refer to "Using the Menu" (p. 3) when adjusting the settings of these functions. Resetting the file names of pictures [FILE NAME] E SETUP X FILE NAME Folder name Folder name DCIM 100OLYMP File name Pmdd0001.jpg 999OLYMP Pmdd9999.jpg Automatic numbering Automatic numbering Pmdd Month: 1 to C (A=October, B=November, C=December) Day: 01 to 31 Adjusting the CCD and adjusting the image processing function [PIXEL MAPPING] E SETUP X PIXEL MAPPING This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended. For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again. To adjust the CCD and the image processing function Press the E button when [START] (submenu 2) is displayed. ● The camera checks and adjusts the CCD and the image processing function at the same time. Submenu 2 RESET AUTO Application This resets the sequential number for the folder name and file name whenever a new card is inserted.*1 This is useful when grouping images on separate cards. Even when a new card is inserted, this continues the numbering for the folder name and file name from the previous card. This is useful for managing all image folder names and files names with sequential numbers. *1 The number for the folder name is reset to 100, and the one for the file name is reset to 0001. EN 39