Onkyo 8555 Instruction Manual - Page 23

Enjoying Audio Sources Input selector buttons SPEAKERS A/B MASTER VOLUME INPUT SELECTOR SP A/B VOLUME / 1 Receiver Press the input selector button to select the component that you want to listen to. Remote controller 4 Receiver Remote controller To adjust the volume, use the receiver's [MASTER VOLUME] control, or the remote controller's VOLUME [ ]/[ ] buttons. Turn the control clockwise to turn up the volume or counterclockwise to turn down the volume. 2 Receiver Use the [SPEAKERS A] and [SPEAKERS B] buttons on the receiver to select the speaker set that you want to use. The A and B speaker indicators show whether each speaker set is on or off. Indicators Remote controller You can use the [SP A/B] button on the remote controller. To select the speaker set, press the [SP A/B] button repeatedly. Note for North American model: When you connect a set of speakers whose impedance is 4 or 6 ohms and output sound only from this speaker set, the speaker impedance setting on the receiver should be set to 6 ohms (see page 15). 3 Start playback on the selected component. 23