Onkyo 8555 Instruction Manual - Page 38

Zone 2-Continued 3 To turn off Zone 2, press the 3 [ZONE 2] button, followed by the [ON/STANDBY] button. Use the Up and Down [ ]/[ ] buttons to adjust the balance. You can adjust the balance from 0 in the center to +12 dB to the right or +12 dB to the left in 2 dB steps. Note: • To control Zone 2, you must press the remote controller's [ZONE 2] button first. Adjusting the Volume of Zone 2 1 On the remote controller, press the [ZONE 2] Remote Mode button, and then use the VOL [ ]/[ ] buttons. Muting Zone 2 On the remote controller, press the [ZONE 2] Remote Mode button, and then press the [MUTING] button. To unmute a zone, on the remote controller, press the [ZONE 2] Remote Mode button, and then press the [MUTING] button again. Adjusting the Tone of Zone 2 1 On the receiver, press the [ZONE 2] button. On the receiver, press the [ZONE 2] button, and then use the Up and Down [ ]/[ ] buttons. 2 Press the receiver's [TONE] button repeatedly to select Bass or Treble. Adjusting the Balance of Zone 2 1 On the receiver, press the [ZONE 2] button. 2 Press the receiver's [TONE] button repeatedly to select Balance. 3 Use the Up and Down [ ]/[ ] buttons to adjust the bass or treble. You can boost or cut the Bass or Treble from -12 to +12 in 2 steps. Notes: • Zone 2 can also be unmuted by adjusting the volume. • The Zone 2 level, balance, and tone functions have no effect on the ZONE 2 PRE OUT when the Zone 2 Out setting is set to Fixed (page 36). 38