Onkyo 8555 Instruction Manual - Page 37
Using Zone 2
UPC - 751398008313
View all Onkyo 8555 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Zone 2-Continued Using Zone 2 This section explains how to turn Zone 2 on and off, how to select an input source for Zone 2, and how to adjust the volume for Zone 2. Controlling Zone 2 from the receiver ZONE 2 LEVEL/TONE Notes: • Only analog input sources are output by Zone 2. Digital input sources are not output. If no sound is heard when an input source is selected, check to make sure it's connected to an analog input. • While Zone 2 is on, the Auto Power On/Standby and Direct Change RI functions do not work. Controlling Zone 2 with the Remote Controller OFF ZONE 2 ON/STANDBY Input selector buttons ZONE 2 1 To turn on Zone 2 and select an input source, press the [ZONE 2] button repeatedly. VOL / MUTING Alternatively, press the [ZONE 2] button followed by an input selector button within 8 seconds. Zone 2 turns on and ZONE 2 indicator 1 lights up. To select the same source as that of the main room, press the [ZONE 2] button repeatedly until "Zone 2 Sel: Source" appears. Press the [ZONE 2] button, then point the remote controller at the receiver and press the [ON/STANDBY] button. Zone 2 turns on and ZONE 2 indicator lights up. To select AM or FM, press the [TUNER] Input Selector button repeatedly. On the North American model, you can also select XM/SIRIUS. Note: • You cannot select different AM or 2 FM radio stations for your main room and Zone 2. The same AM/FM radio station will be heard in each room. To select an input source for Zone 2, press the [ZONE 2] button, followed by an Input Selector button. To select AM or FM press the [TUNER] Input Selector button 2 To turn off Zone 2, press the Zone 2 [OFF] button. repeatedly. On the North American model, you can also select XM/SIRIUS. Note: • You cannot select different AM or FM radio stations for your main room and Zone 2. The same AM/FM radio station will be heard in each room. 37