Onkyo 8555 Instruction Manual - Page 28

Listening to the Radio DIRECT TUNING TUNING DOWN/UP Number buttons TUNER TUNING MODE Number buttons D.TUN TUNING / CLR / AM Frequency Step Setup (not North America and Europe) You must specify the AM frequency step used in your area. Note that when this setting is changed, all radio presets are deleted. Use the receiver to perform the procedure below. 1 and While pressing the [TUNER] button, press the [TUNING MODE] button. Each press of the [TUNING MODE] button switches the frequency step setting between "10 kHz" and "9 kHz." Release the button After the desired frequency step is displayed, release the [TUNER] button. Listening to AM/FM Stations With the built-in tuner, you can enjoy AM and FM radio stations. 1 Receiver Use the [TUNER] input selector button to select AM or FM. In this example, FM has been selected. 2 Receiver 3 Receiver Press the [TUNING MODE] button so that the AUTO indicator appears or disappears from the display. Auto Tuning To activate this mode, press the [TUNING MODE] button to turn on the "AUTO" indicator. In this mode, you will receive the broadcast in stereo sound. Manual Tuning To activate this mode, press the [TUNING MODE] button to turn off the "AUTO" indicator. In this mode, you will receive the broadcast in monaural sound. Press the TUNING [ DOWN] or [UP ] button. You can also use the remote controller's TUNING [ ]/[ ] buttons or arrow [ ]/[ ] buttons to tune the radio. Auto Tuning Searching stops when a station is found. Manual Tuning The frequency stops changing when you release the button. Press the buttons repeatedly to change the frequency one step at a time. Band Frequency (Actual display depends on country.) 28