Panasonic AW-HN40H AW-HN38H Operating Instructions

Panasonic AW-HN40H Manual

Get Panasonic AW-HN40H PDF manuals and user guides View all Panasonic AW-HN40H manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic AW-HN40H manual content summary:

  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 1
    HD Integrated Camera Model No. AW‑HN40HWPC Model No. AW‑HN40HKPC Model No. AW‑HN40HWE Model No. AW‑HN40HKE Model No. AW‑HN38HWPC Model No. AW‑HN38HKPC Model No. AW‑HN38HWE Model No. AW‑HN38HKE ● How the Operating Instructions are configured : The
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 2
    and products contained in these Operating Instructions may be trademarks or registered manual AW‑HN40HWPC, AW‑HN40HKPC, AW‑HN40HWE, AW‑HN40HKE AW-HN40 AW‑HN38HWPC, AW‑HN38HKPC, AW‑HN38HWE, AW‑HN38HKE AW-HN38 AW‑HS50N AW‑HS50E AW‑HS50 AW‑RP50N AW‑RP50E AW-RP120G AK-HRP200G AW‑RP50 AW
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 3
    Multi display mode  62 What to do when encountering problems in the Web screen configurations  63 basic shooting operations AW‑RP120 Remote Camera Resetting the limiters  122 Controller  29 Activation  123 Operations on the AK‑HRP200 Remote Operation Panel  32 Troubleshooting
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 4
    that overflow with ambience. Using i.Zoom allows up to 40x zoom while maintaining HD quality. [AW‑HN38] In addition to its optical 22x zoom lens, the unit comes a Panasonic camera controller is also possible via Panasonic's proprietary serial communication format. ●● The unit supports standard
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 5
    kinds of problems. ●● Use the desktop version of Internet Explorer. (Internet Explorer for Windows UI is not supported.) ●● For the most recent information on compatible operating systems and web browsers, visit the support desk at the following web site. http://pro-av.panasonic.net/ ■■Disclaimer
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 6
    changed and the original settings are to be restored, refer to the "What to do when encountering problems in the basic shooting operations" (page 12) and "Camera screen" (page 36) in "Camera auto settings will be turned on, and manual operations will no longer be possible for some of the items. 6
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 7
    the units and devices connected in the system to OFF. When performing the operations using the controller When using an AW-RP50, AW-RP120 or AK-HRP200: Refer to the Operating Instructions of the controller. 4 If a multiple number of units are going to be used, repeat steps 2 and 3 as required. The
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 8
    for various applications. (page 44, page 65) IP: Enables IP image transmission over multiple channels. The IP transmission of H.264 images is also supported. SD card: Inserting an SD card (optional accessory) into the unit enables recording H.264 images to the SD card. The data recorded to the
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 9
    operations using the controller When using an AW-RP50, AW-RP120 or AK-HRP200: Refer to the Operating Instructions of the controller. Selecting the shooting menu, for example, all the auto settings will be turned on, and manual operations will no longer be possible for some of the items. Full Auto
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 10
    camera menu display is exited. 3 Press the [▲] or [▼] button to bring the cursor to "Camera". When performing the operations using the controller When using an AW-RP50, AW-RP120 or AK-HRP200: Refer to the Operating Instructions of the controller. 10
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 11
    (the subject becomes reduced in size): Tilt the [ZOOM] lever toward the WIDE direction. ●●Changing the pan/tilt direction and zoom speed When using an AW-RP50, AW-RP120 or AK-HRP200: Refer to the Operating Instructions of the controller. 11
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 12
    encountering problems in the basic shooting operations If the trouble is not resolved by taking the action suggested below, refer to "Troubleshooting" following the procedure below. When using an AW-RP50, AW-RP120 or AK-HRP200: Refer to the Operating Instructions of the controller. ●● If the unit's
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 13
    shooting (pages 14 to 15) ●● Manual adjustment of focus ●● Manual adjustment of iris ●● Manual adjustment of shutter speed ●● Manual adjustment of gain Black level (master pedestal) adjustment (page 21) ●● This adjustment is performed to align the black level (pedestal level) of a multiple number
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 14
    the automatic adjustment. When performing the operations using the controller When using an AW-RP50, AW-RP120 or AK-HRP200: Refer to the Operating Instructions of the controller. Note ●● When the focus is set to manual, the subject may go out of focus during panning, tilting and zooming. Therefore
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 15
    Note ●● When the following settings are made on the AW‑HN40/AW‑HN38, the shutter speed cannot be manually adjusted (as the camera is locked in auto mode). (AGC). When using an AW-RP50, AW-RP120 or AK-HRP200: For details, refer to the operating instructions supplied with the controller. When
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 16
    controller that is used for operation. ●● The focus and iris operating modes (manual and auto settings) are not registered. The current focus and iris values When using an AW-RP50 or AW-RP120: Up to 100 entries can be registered/recalled. For details, refer to the operating instructions for the
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 17
    adjustment) which is used to keep adjusting the white balance at all times, or manual adjustment can be selected. The results of the AWB adjustment can be stored in mode (Scene) on the AW‑HN40/ AW‑HN38 is set to "Full Auto", the white balance cannot be manually adjusted (ATW mode is activated
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 18
    6 Press the [○] button. "White Balance Mode" starts blinking. When performing the operations using the controller When using an AW-RP50, AW-RP120 or AK-HRP200: Refer to the Operating Instructions of the controller. 7 Press the [▲] or [▼] button to change the White Balance Mode to be used to "AWB
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 19
    White balance adjustment (continued) ●●Auto tracking white adjustment (ATW) When white balance adjustment is set to "ATW", the white balance will be corrected automatically, even if the light source or color temperature changes. This function works when "ATW" is selected instead of "AWB A" or "AWB
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 20
    gain and B gain adjustment) White balance can be adjusted manually. Note ●● R/B gain adjustments can only be performed when White the operations using the controller When using an AW-RP50, AW-RP120 or AK-HRP200: Return Refer to the Operating Instructions of the controller. 2 Press the [▲] or
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 21
    using the wireless remote control 1 Press the [M/IRIS] button. Set the iris to the manual mode. 2 Press the [IRIS -] button. The lens iris closes until the image is using the controller When using an AW-RP50, AW-RP120 or AK-HRP200: Refer to the Operating Instructions of the controller. Return 21
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 22
    support page on the following website. http://pro-av.panasonic.net/ Described below are the basic operations for changing the camera menu item settings using the wireless remote control and controller (AW‑RP50, AW . Also, refer to the Operating Instructions of the controller. Table of operations
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 23
    ) Supported Not supported Not supported Not supported Not supported Not supported Not supported Supported *1 Supported Supported Supported Not supported Not supported Not supported Not supported Supported with some restrictions *4 Supported Not supported Not supported Supported AW-RP655 Supported
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 24
    Basic operations (continued) ■■When performing the operations using the wireless remote control 1 Press the [CAM1], [CAM2], [CAM3] or [CAM4] button to select the unit which is to be operated. 8 Press the [○] button. The value of the item to be set is entered, and it stops blinking. 9 After the
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 25
    the [PRESET MEMORY/MENU] area. The button lights, and the SETUP menu appears on the LCD panel. 3 Turn the F1 dial to select an AW‑HN40/AW‑HN38 camera menu item or to change a setting value. Turn the F1 dial to move the cursor up and down or to change setting values
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 26
    ] button lights, and the [PRESET MEMORY/ MENU] buttons become selectable. ●●Preset speed table setting (PRESET SPEED) 1 Press the [MENU] button on the AW-RP50. The [MENU] button lights, and the [PRESET MEMORY/ MENU] buttons become selectable. 2 Press the [4 (AWB/ABB)] button in the [PRESET MEMORY
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 27
    Turn the F1 dial to select "FUNCTION", then press the F1 dial. ●●Digital image stabilization function setting 1 Press the [MENU] button on the AW-RP50. The [MENU] button lights, and the [PRESET MEMORY/ MENU] buttons become selectable. 2 Press the [9 (SETUP)] button in the [PRESET MEMORY/MENU] area
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 28
    DURING), color temperature settings (COLOR TEMP) and digital extender function (DIGITAL EXTENDER) to the [USER] buttons. 1 Press the [MENU] button on the AW-RP50. The [MENU] button lights, and the [PRESET MEMORY/ MENU] buttons become selectable. 2 Press the [9 (SETUP)] button in the [PRESET MEMORY
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 29
    the camera menu, press and hold the [CAMERA OSD] button for about 2 seconds. ●●Switching between Day and Night mode 1 Press the [MENU] button on the AW-RP120. The [MENU] button lights. 2 Press the FUNCTION menu [23] button. The button lights, and the OPTION menu appears on the LCD panel. 3 Turn the
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 30
    press the [EXIT] button and the [ATW] button of [WHITE BAL] simultaneously. ●●Preset speed table setting (PRESET SPEED) 1 Press the [MENU] button on the AW-RP120. The [MENU] button lights. 2 Press the FUNCTION menu [23] button. The button lights, and the OPTION menu appears on the LCD panel. 3 Turn
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 31
    (D.EXTENDER) function setting 1 Press the [MENU] button on the AW-RP120. The [MENU] button lights. 2 Press the FUNCTION menu function (DIGITAL EXTENDER) to the [USER] buttons. 1 Press the [MENU] button on the AW-RP120. The [MENU] button lights. 3 Turn the F1 dial to select "D. EXTENDER", then
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 32
    menu operation 1 Press and hold the [CHARA/MENU] button on the AK-HRP200 for about 2 seconds. The AW‑HN40/AW‑HN38 camera menu appears on the monitor. 2 Turn the SELECT dial to select an AW‑HN40/ AW‑HN38 camera menu item or to change a setting value. Turn the SELECT dial to move the cursor
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 33
    . For details on operations, refer to the AK-HRP200 Operating Instructions . Control/display component 1 Camera power switch 2 Viewfinder display selection 35 Switch Label AW‑HN40/AW‑HN38 : Supported : Supported with some restrictions -: Not supported Remarks HEAD POWER  VF
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 34
    OPT IRIS/M.PED LOCK IRIS () M.PED () PUSH PREVIEW FADER FULL AUTO CLOSE SENSE COARSE EXT D.EXT SD CARD AW‑HN40/AW‑HN38 : Supported : Supported with some restrictions -: Not supported Remarks The shutter value is fixed during transition from SYNC.  • For 59.94p, 59.94i: 1/100 • For 29
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 35
    more detailed settings. For details on the basic operations to display the camera menus and change the items using the wireless remote control or controller (AW‑RP50, AW-RP120 or AK-HRP200), refer to pages 22 to 34. The "*" and "#" marks in the menu titles indicate the hierarchical level of the menu
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 36
    , the detailed setting and adjustment menus are not displayed. Manual1 to 3: In these modes, the detailed settings and adjustments are established manually to match the prevailing shooting conditions and the user's preferences. When the Manual1, Manual2 or Manual3 mode has been selected, the
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 37
    "Auto" has been selected as the "Contrast Mode" setting. Shutter Mode [Off, Step, Synchro] Select for camera shutter mode. This item can be set when "Manual" has been selected as the "Contrast Mode" setting. Off: The shutter is set to OFF (so that it cannot be tripped). Step: The step shutter
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 38
    are output. The lens iris is forcibly set to open. ●● In Night mode, the white balance adjustment cannot be used. ●● When focus is set to manual, the focus may shift when switching between Day and Night mode, depending on the shooting conditions. If necessary, either adjust the focus or set the
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 39
    Camera menu items (continued) ■■Picture 1/3 screen *** Picture 1/3 *** Chroma Level White Balance Mode Color Temperature R Gain B Gain Pedestal 0 AWB A ---0 0 0 Return Chroma Level [-3 to +3] Set here is the color intensity (chroma level) of the images. White Balance Mode [ATW, AWB A, AWB B,
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 40
    Camera menu items (continued) ■■Picture 2/3 screen *** Picture 2/3 *** Detail Detail Level H Detail Level L Flesh Tone Mode HDR DRS E.DRS Low 18 9 Off Off Off Off Return Detail [Off, Low, High] The image detail (image sharpness) is adjusted here. When "Low" or "High" is selected, the detail is
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 41
    Camera menu items (continued) E.DRS [Off, Low, High] Sets the E.DRS function, which provides a greater amount of compensation than DRS does when images with significant light/dark differences are displayed. Select "Low" or "High" to enhance the compensation effect. Depending on the shooting
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 42
    Camera menu items (continued) ■■16-axis color matrix (These operations can be performed only when Manual1 to 3 has been selected as the Scene setting.) *** Matrix 1/3 *** Matrix Type Normal [ Saturation ] [ Phase ] B ---- ---- B_B_Mg ---- ---- B_Mg_Mg ---- ---- Mg
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 43
    Camera menu items (continued) ■■System screen This is the menu in which the camera's output image settings are configured. ## System ## Output Others Return Output This displays the Output screen on which to select the camera's output image settings. Others This displays the Others screen on which
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 44
    the setting for the priority output of video. IP: Enables IP image transmission over multiple channels. The IP transmission of H.264 images is also supported. SD card: Inserting an SD card (optional accessory) into the unit enables recording H.264 images to the SD card. The data recorded to the
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 45
    frequency When the currently selected frequency is changed in the Output screen, the frequency-change confirmation screen appears. Note ●● When using a monitor that does not support the 59.94 Hz or 50 Hz frequencies, images may not be output after the frequency is changed. Verify that the monitor
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 46
    for the function which compensates for out-of-focusing when it occurs during panning, tilting or zooming operations at the manual focus setting. This item can be selected only when "Manual" has been selected as the "Focus Mode" setting. Return Use this to return to the previous menu. Preset Scope
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 47
    : Use only the optical zoom. Up to 30x*1 optical zoom is possible. *1: This is the zoom magnification for the AW‑HN40. The corresponding magnification for the AW‑HN38 is 22x. i.Zoom: Enable the i.Zoom function. Enabling this function allows you to perform electronic zoom while reducing
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 48
    Camera menu items (continued) IR Control [Disable, Enable] "Enable" or "Disable" is set here for operations conducted from the wireless remote control. The operations are enabled when the unit's power is turned on from an external device other than a wireless remote control, and they are disabled
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 49
    Camera menu items (continued) ■■Others 4/4 screen ### Others 4/4 ### Audio Input Volume Plugin Power ALC Equalizer Protocol Model Select Off ------On Off SEVIHD1 Return Audio [Off, On] Enable/disable the audio input signal from the device connected to the audio input connector. Input Volume [
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 50
    Camera menu items (continued) ■■Maintenance screen ## Maintenance ## Firmware Version IP Network Initialize ■■Firmware Version screen ### Firmware Version ### Ver.1.0 Return Firmware Version This is selected to display the Firmware Version screen on which to check the version of the firmware used.
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 51
    Camera menu items (continued) ■■IP Network screen ### IP Network ### IP Address 192. 168. 0. 10 Subnet Mask 255. 255. 255. 0 Default Gateway 192. 168. 0. 1 ●●Concerning initialization When "Initialize" is selected on the Maintenance screen, the Initialize screen appears. Initialize screen ###
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 52
    Phase Factory setting Full Auto Manual1 to 3 Selection items Full Auto Manual1 to Full Auto, Manual1, Manual2, Manual3 Manual3 ---- Auto Auto, Manual 0 0 -10 to +10 ---- Off Off, Step, Synchro ---- [59.94Hz] ●● When 59.94 Hz is selected: 1/100 1/100, 1/250, 1/500, 1/1000, 1/2000
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 53
    /25PsF, 1080/25p, 720/50p 59.94Hz, 50Hz AW‑HN40HWE, AW‑HN40HKE, AW‑HN38HWE, AW‑HN38HKE: 50Hz Priority Mode NDI|HX Install Position Desktop Slow, Fast 1 to 30 Mode A, Mode B, Mode C Off, On Off, On Auto, Manual Off, On Opt.Zoom, i.Zoom, D.Zoom, D.Extender x2 to x16 Off, On Disable, Enable
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 54
    Camera menu item table (continued) Camera menu Top Menu System Others Others 4/4 Item Audio Input Volume Plugin Power ALC Equalizer Protocol Model Select Maintenance Firmware Version IP Network Initialize ---IP Address Subnet Mask Default Gateway ---- Factory setting Full Auto Manual1 to 3
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 55
    Displaying the web screen With a personal computer connected to the unit, it is possible to view the camera's IP videos or select various settings from the web browser. Select an IP address for the personal computer within the private address range while ensuring that it is different from the
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 56
    installed, an installation confirmation message is displayed before the live screen [Live] is displayed. In a case like this, follow the on-screen instructions to install the software. For further details, refer to "Installing the plug-in viewer software" (page 47 in the ). Notes ●● When
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 57
    Web screen operations The live screen [Live] includes a "single display mode" that displays IP images from a single camera and a "multi display mode" that displays IP images from multiple cameras. See below for details on the single display mode, and see page 62 for details on the multi display
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 58
    Web screen operations (continued) 1. Menu switching [Other Menu >>] / [Stream Menu >>] Switch between menu displays. Clicking [Other Menu >>] when the Stream menu is displayed displays the Other menu. Clicking [Stream Menu >>] when the Other menu is displayed displays the Stream menu. ●● The Stream
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 59
    Web screen operations (continued) 5. SD Card Operation buttons [SD Card Operation] Perform the operations for recording the video and audio captured with the unit to an SD card. [Rec] Starts recording to an SD card. The SD access lamp on the top right of the screen is displayed in red during
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 60
    this to adjust the zoom (magnification) [+] in the Tele direction. 11.Focus [Focus] [Auto] [Near] [O.T.AF] [Far] Use this to switch between auto and manual focusing. When Auto is selected, the focus is adjusted automatically. Use this to adjust the focus in the Near direction. It does not work
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 61
    and time set on the unit. ("Clock settings tab [Date&Time]" on page 65) 22.Connected device indication [AW‑HN40] Displays "HD Integrated Camera AW‑HN40". [AW‑HN38] Displays "HD Integrated Camera AW‑HN38". 23.Camera title display area The name for the unit configured in the Basic screen [Basic] (page
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 62
    Web screen operations (continued) Live screen [Live] : Multi display mode In this mode, the images of a multiple number of cameras can be monitored on one screen (called the 'multi screen'). The image of 4 cameras or max. 16 cameras can be monitored at one time. When the camera title of any of the
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 63
    Web screen configurations Logging into the Web setup screen [Setup] 1. Turn on the power of the unit from the standby mode state. 4. Click the [OK] button. Click [OK] again when the following screen appears. 2. Click the [Setup] button. (page 56) The login screen appears. 3. Enter the user name
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 64
    Web screen configurations (continued) Web setup screen [Setup] The settings for the unit are selected on this screen. Note ●● The setting menu operations can be performed only by users whose access level is "1. Administrator". For the procedure used to set the access level, refer to page 88. 8 1 2
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 65
    over multiple channels. The IP transmission of H.264 images is also supported. SD card Inserting an SD card (optional accessory) into the display format is Mmm/DD/YYYY. ●● The time is in the 24-hour format. Manual - Time zone Selects the time zone according to the region where the camera is
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 66
    "Start time & date" and "End time & date" settings cannot be set to the same value. If the same value is set, All the items under "Manual -" are restored to their original values. ●● If a more accurate time setting is required for system operation, use an NTP server. (page 94) „„Live page tab
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 67
    Web screen configurations (continued) „„SD card tab [SD memory card] Configure the format settings for the video to be recorded to an SD card or initialize a card. ●● The priority mode needs to be set to "SD card". For details, refer to "Priority mode tab [Priority Mode]" (page 65). Recording
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 68
    Web screen configurations (continued) Image screen [Image/Audio] „„IP video settings tab [Video over IP] The JPEG image and H.264 image settings as well as the settings related to image quality are selected on this screen. zzInitial display settings for "Live" page Stream Select the images to
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 69
    Web screen configurations (continued) There are restrictions on the simultaneous transmission of JPEG and H.264. For details, refer to page 73. zzJPEG(1) • JPEG(2) • JPEG(3) Configure the settings for JPEG images. Note ●● When the Priority Mode (page 44, page 65) selection is "NDI|HX", "JPEG(2)"
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 70
    Web screen configurations (continued) Image capture size Select the resolution for H.264 images. Selectable options will vary depending on the selected resolution setting. Setting value: H.264(1) 1920×1080 1280×720 640×360 (when HDR is "Low" or "High") H.264(2) 1280×720 640×360 320×180 H.264
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 71
    Web screen configurations (continued) ●●Relationship between image capture size, frame rate, and H.264 bit rate The range of H.264 bit rates that can be specified varies depending on the resolution. When the Priority Mode (page 44, page 65) selection is "IP", the following settings will be
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 72
    as "router") (page 90). For details, refer to the operating instructions for the router. Multicast An unlimited number of users can access must be configured when [Transmission type] is set to [Unicast port (MANUAL)]. Multicast address Enter the multicast IP address. Images and audio will be
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 73
    Web screen configurations (continued) List of settings for transmission output of IP video ●● When "Priority Mode" is set to "IP", "SD card" or "USB" Settings H.264(1) H.264(2)*1 H.264(3)*1 Resolution 1920×1080 1280×720*1 1280×720 1280×720 640×360*3 640×360 640×360 320×180 320×180
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 74
    Web screen configurations (continued) „„Audio [Audio] Configure audio settings. Notes ●● Images and audio are not synchronized. Therefore, images and audio may be slightly out of sync. ●● The audio may skip depending on the network environment. zzAudio Audio Enable/disable the audio input signal
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 75
    , the detailed setting and adjustment menus are not displayed. Manual1 to 3 In these modes, the detailed settings and adjustments are established manually to match the prevailing shooting conditions and the user's preferences. When the Manual1, Manual2 or Manual3 mode has been selected, the
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 76
    Web screen configurations (continued) Shutter Mode Select for camera shutter mode. This item can be set when "Manual" has been selected as the "Contrast Mode" setting. When a higher shutter speed is selected, fast-moving subjects do not become blurred easily but the images
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 77
    Web screen configurations (continued) zzPicture Chroma Level Set here is the color intensity (chroma level) of the images. Setting range: -3 to +3 Factory settings: +2 AWB When you click the [Execute] button, this is used to execute automatic white balance (AWB) to set the white balance. For
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 78
    Web screen configurations (continued) Detail The image detail (image sharpness) is adjusted here. When "Low" or "High" is selected, the detail is enhanced. Setting value: Off, Low, High Factory settings: Low Detail Level H The image sharpness level is adjusted here when "High" has been selected as
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 79
    Web screen configurations (continued) E.DRS Sets the E.DRS function, which provides a greater amount of compensation than DRS does when images with significant light/dark differences are displayed. Select "Low" or "High" to enhance the compensation effect. Depending on the shooting conditions,
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 80
    Web screen configurations (continued) zzUser Color Matrix Setup screen (color matrix settings screen) The User Color Matrix Setup screen is displayed when "User" is selected as the "Color Matrix" setting on the Image adjust screen and the [Setup] button is clicked. B to Cy_B_B: Saturation The
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 81
    adjustments. Use this to adjust the focus in the Far direction. It does not work during automatic adjustments. Use this to switch between auto and manual focusing. Brightness Use this to make the image darker. It does not work during automatic adjustments. Use this to make the image lighter. It
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 82
    "Off" is set, adjust the focus as required after zooming or set the focus to the auto mode. This item can be selected only when "Manual" has been selected as the "Focus Mode" setting. Preset Setting Preset Speed Table Set the preset speed table (Slow, Fast). During preset playback, preset actions
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 83
    Web screen configurations (continued) „„System screen [System] This is the menu in which the camera's output image settings are configured. zzOutput This item's setting is reflected when the [Set] button is pressed. Format The video format is changed on this screen. For details on how to change
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 84
    .Zoom Use only the optical zoom. Up to 30x*1 optical zoom is possible. *1: This is the zoom magnification for the AW‑HN40. The corresponding magnification for the AW‑HN38 is 22x. i.Zoom Enable the i.Zoom function. Enabling this function allows you to perform electronic zoom while reducing drops
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 85
    the function which compensates for out-of-focusing when it occurs during panning, tilting or zooming operations at the manual focus setting. This item can be selected only when "Manual" has been selected as the "Focus Mode" setting. Factory settings: Off Tally "Enable" or "Disable" is set here for
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 86
    Web screen configurations (continued) CAM/BAR Switch between color bar display and camera image display on the monitor and the web setup screen. Setting value: Camera, Colorbar Factory settings: Camera Note ●● When the color bar is displayed, a test tone (1 kHz) is output according to the Audio
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 87
    Web screen configurations (continued) Multi screen setup screen [Multi-screen setup] The cameras whose images are to be displayed on the multi screen are set here. IP address Input here the IP address of the camera whose images are to be displayed on the multi screen or the host name. With one
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 88
    . ●● When [User auth.] is set to [On], network connection with the AW‑RP50 will be disabled. ●● When [User auth.] is set to [On] while [ Authentication] is set to [Digest], network connection with the AW‑RP50, AW‑RP120, and AK‑HRP200 will be disabled. User name [1 to 32 half-size
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 89
    Web screen configurations (continued) „„Host authentication screen [Host auth.] Click the [Host auth.] tab of User mng. screen [User mng.]. Configure the host authorization settings that restrict the personal computers (IP addresses) that can access the unit. „„Priority stream screen [Priority
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 90
    consult your network administrator. The following information is required to configure network settings. Consult your network administrator or Internet service provider. ●● IP address ●● Subnet mask ●● Default gateway (when using a gateway server or router) ●● HTTP port ●● DNS primary and secondary
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 91
    IPv6 address that includes the prefix information provided by the IPv6-compatible router. For details, refer to the operating instructions for the router. Default gateway When [Manual] is set to [On] for [IPv6 network], enter the default gateway for the unit's IPv6 network. Factory settings: blank
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 92
    Web screen configurations (continued) HTTP max segment size(MSS) Select whether to limit the maximum segment size (MSS) transmitted by a camera when viewing camera images using HTTP. Setting value: Unlimited(1460byte) Unlimited (1460 byte) Limited(1280byte) Limited (1280 byte) Limited(1024byte)
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 93
    Web screen configurations (continued) „„Advanced network setting screen [Advanced] Click the [Advanced] tab in the network setup screen [Network]. Settings relating to the FTP, NTP, UPnP, and HTTPS functions are performed here. Click the links to each item to move to the respective setting page.
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 94
    need to set "DHCP" (page 90) of "IPv4 network" on the [Network] tab of the network setup screen [Network] to "On". NTP server address When [Manual] is selected in the [NTP server address setting], input the IP address or host name of the NTP server. Maximum number of characters 0 to 128
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 95
    To use the automatic port forwarding function, the used router must support UPnP and the UPnP function must be enabled. Factory settings: displayed, refer to "No access is possible from the web browser" in the "Troubleshooting" (page 126). CRT key generate A CRT key (SSL encryption key) is
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 96
    (page 102). Note ●● When using an HTTPS connection, network connection with the AW-RP50, AW-RP120, and AK-HRP200 will be disabled. HTTPS port This sets the Port No certificate) in your personal computer in accordance with the screen instructions. (page 103) ●● When using a server certificate:
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 97
    Web screen configurations (continued) „„HTTPS settings [HTTPS] This encrypts access to the camera and sets HTTPS to improve communication safety. Setting HTTPS is performed by following the procedures below. 1 2 3 4 5 1. Generating a CRT key (SSL encryption key) (page 98) When using self-signed
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 98
    Web screen configurations (continued) „„Generating a CRT key (SSL encryption key) [CRT key generate] Notes ●● A CRT key cannot be generated when self-signed certificates and server certificates are enabled. ●● The size of the key that can be used by the Certificate Authority (CA) differs when using
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 99
    Web screen configurations (continued) „„Generating a self-signed certificate [Self-signed Certificate - Generate] Note ●● A self-signed certificate cannot be generated when a CRT key has not been generated. 1. Click the [Execute] button in [Self-signed Certificate - Generate]. [Self-signed
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 100
    Web screen configurations (continued) „„Generating a Certificate Signing Request (CSR) [CA Certificate - Generate Certificate Signing Request] Notes ●● A certificate signing request (CSR) cannot be generated if a CRT key has not been generated. ●● To generate a certificate signing request (CSR),
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 101
    Web screen configurations (continued) „„Installing a Server Certificate [CA Certificate - CA Certificate install] Notes ●● A server certificate (security certificate) cannot be installed if a Certificate Signing Request (CSR) has not been generated. ●● The server certificate must have been issued
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 102
    connection is possible. Note ●● When using an HTTPS connection, network connection with the AW-RP50, AW-RP120, and AK-HRP200 will be disabled. 2. Set the Port No. to be certificate) in your personal computer in accordance with the screen instructions. (page 103) ●● Using a server certificate Install
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 103
    the user name and password. Note ●● When the above screen is displayed after accessing a device apart from the camera or a website, there may be a security problem, so check this carefully. 103
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 104
    Web screen configurations (continued) 5. Click [Next], which is displayed in the certificate import wizard. 8. Click [Next]. Note ●● In the case of Internet Explorer 10 and 11, select the [Save destination] and click [Next]. 6. Select [Place all certificates in the following store] and click [
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 105
    Web screen configurations (continued) Maintenance screen [Maintenance] Among the various maintenance operations performed on this screen are system log checks, system version upgrading and initialization of the unit. The Maintenance screen consists of six tabs: [System log], [Product info.], [
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 106
    . ●● Before using the version upgrading software, be absolutely sure to check the precautions to be observed, and follow the instructions. ●● Use the following files specified by Panasonic Corporation as the software used for version upgrading. UPDATE.HDC ●● Do not turn off the unit's power while
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 107
    Web screen configurations (continued) „„Status confirmation screen [Status] Confirm the status of the unit. „„Reset settings screen [Default reset] The unit's setting data is initialized and the unit is restarted on this screen. zzUPnP Port number(HTTP) Displays the port number configured via
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 108
    , specify the destination folder. When [Camera] is selected in [Config data type], the following settings are saved. File name Settings AW‑HN40_ CSetting.dat*1 Scene Scene1 settings Scene Scene2 settings Scene Scene3 settings Scene Scene4 settings System settings Preset settings *1: The file
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 109
    Web screen configurations (continued) „„Activate screen [Activate] You can perform activation (register an unlock key code) to add available functions. For details, refer to "Activation" (page 123). Download Obtain the serial number and other information for the remote camera. Upload Upload an
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 110
    Recording to and playing back from a memory card The unit can record and playback in MP4 format to/from the following SD cards compliant with the SD standards. ●● Set the priority mode to "SD card" before use. For details, refer to "Priority mode tab [Priority Mode]" (page 65). Notes ●● IP control,
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 111
    Recording to and playing back from a memory card (continued) 4. Start and stop recording by clicking the [Rec] button and [Stop] button of the "SD Card Operation" item. ●● If the web screen is updated during recording, display becomes the Other menu of the Live screen. ●● When the unit records to
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 112
    Recording to and playing back from a memory card (continued) Playing Back Play List screen Select content individually. Select all content. Switches to top page. Returns to the previous page. Goes to the next page. 1. Click the [Play List] button of the "SD Card Operation" item. Switches to
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 113
    Recording to and playing back from a memory card (continued) Downloading a file 3. Perform playback operations with the buttons on the playback screen. Stops playback. Pauses playback. Starts playback. Rewinds the content by 5 seconds. Fast forwards the content by 5 seconds. Stops playback and
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 114
    . Setting range: -10 to +10 ●● This cannot be controlled when the lens iris is set to manual adjustment. Contrast [Contrast] This is not supported by this unit. Hue [Hue] This is not supported by this unit. Saturation [Saturation] This allows you to set a function equivalent to "Chroma Level" of
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 115
    is set as "Auto". Also, if auto mode is canceled, the focus mode is set as "Manual". Exposure [Exposure] This allows you to set the shutter speed in the same way as when opposite direction. Roll [Roll] This is not supported by this unit. Low light compensation [Low Light Compensation] This is not
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 116
    Web camera functions (continued) Audio input mixer [Audio Input Mixer Properties] Enable/Disable (Mute) [Enable] The audio input signal from the device connected to the audio input connector can be turned off or on in the same way as "Audio" of the camera menus and Web settings. Setting value: 0 (
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 117
    Specifications iOS 8.3 Android 4.4 Notes ●● For the latest information on compatible operating systems and web browsers, visit the support desk at the following website. http://pro-av.panasonic.net/ ●● Use a standard web browser with an Android terminal. ●● Images are displayed only in the JPEG
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 118
    Displaying the web screen using a mobile terminal (continued) Preset Resolution switching When this button is pressed, the buttons for selecting the preset positions are displayed on the screen. When one of the displayed buttons is pressed, the camera's pan/tilt position moves to the preset
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 119
    When this button is pressed, the buttons for performing the iris operations are displayed on the screen. This switches the iris between auto and manual. At the auto setting, the button label is green. This adjusts the iris in the "close" direction. It does not work during automatic adjustments
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 120
    Displaying the web screen using a mobile terminal (continued) Camera menu (OSD menu) operation When this button is pressed, the buttons for performing the camera menu operations are displayed on the screen. At the same time, the camera menus are also displayed on the monitor images of the unit. The
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 121
    and controller or web setting screen. Whatever was set or released last takes precedence. For the controller operations, refer to the Operating Instructions of the controller. The settings of the limiters using the wireless remote control will be described here. ■■Basic limiter operations 1 Press
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 122
    Limiters (continued) ■■Setting the limiters The limiter positions can be set by following the steps below. When the position is set, the tally lamp blinks once. 1 Press one of the [CAM1] to [CAM4] buttons to select the unit. ●● Setting the upper limit position of the movement range Press the [▲] or
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 123
    of the unit) is downloaded to the personal computer. 4. Connect to the following activation code generation site from the Web browser. https://panasonic.biz/cns/sav/actkey_e/ 5. Obtain the activation code following the procedure displayed on the site. The activation code "ACTIVE.LST" is downloaded
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 124
    Activation (continued) Activating the unit Checking that activation is complete 1. Click [Setup]  [Maintenance]  [Product info.] from the Web screen. 1. Click [Browse] of the "Upload" item and then specify the folder in which the obtained "ACTIVE.LST" is stored. 2. Click the [Execute] button of
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 125
    Troubleshooting ●●Operation Symptom Cause and remedial action ●● Is the AC adaptor properly?  Refer to the Operating Instructions of the controller. Cannot operate using the controller ●● The user authorization must be set to OFF when the AW-RP50, AW-RP120, and AK-HRP200 remote camera
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 126
    Troubleshooting if the unit is connected to the controller.  Refer to the Operating Instructions of the controller. ●● Has a LAN cable of category 5 or the camera] A reply returned from the unit signifies that there are no problems in operation. If a reply is not received, try following operation: •
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 127
    Troubleshooting (continued) Symptom Cause and remedial action No access is possible from the web browser Cannot access the camera from a mobile terminal ●● Are you accessing via "
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 128
    Troubleshooting (continued) ●●Video/Audio Symptom Cause and remedial action No pictures are may be superimposed onto the white parts of the camera menus. No auto focusing ●● Is the focus set to manual?  Auto focusing is initiated as soon as the focus is set to auto. ●● In some situations, it
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 129
    Troubleshooting (continued) Symptom Cause and remedial action The images appear jerky when the 1080/29.97PsF or 1080/25PsF format is selected ●● Operation is problem setting for the iris or select the manual or too dark setting and adjust the iris manually. The images are in black and white
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 130
    Troubleshooting (continued) Symptom Cause and remedial action The brightness changes cyclically or the colors change, and horizontal stripes can be seen passing across the screen ●● These
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 131
    Troubleshooting (continued) ●●IP videos Symptom Cause and remedial action [When using I visit the webpage]. D Click the [OK] button. ●● The images may not be refreshed or other trouble may occur with some web browsers or their version which is being used. The images are not refreshed ●●
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 132
    Troubleshooting (continued) Symptom Cause and remedial action [When using Windows] ●● Press the [F5] key on the keyboard of the personal computer to request that the settings
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 133
    Troubleshooting (continued) Symptom Cause and remedial action The authentication screen appears repeatedly ●● Has the user name or password been changed?  If you change the user name
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 134
    adapter to the latest version. If this does not resolve the problem, adjust the hardware accelerator function as follows. This section describes the Resolution] from the menu. B Click [Advanced settings]. C Select the [Troubleshoot] tab, and click [Change setting]. D If the [User Account Control]
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 135
    Troubleshooting (continued) ●●Web browser settings Depending on the OS installed on the personal computer, the following may occur. Follow the instructions This website wants to run the following add-on: 'Web from 'Panasonic System Networks Co., Ltd.'." ●● Select [Allow]. For Internet Explorer
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 136
    76 Automatic adjustment (AWB 17 Automatic installation of viewer software 66 Auto port forwarding 95 Auto tracking white adjustment (ATW 19 AWB 77 AW-RP50 25 AW-RP120 29 B Backlight Comp 114 Back Light COMP 41, 79 Backup 108 Bandwidth control (bitrate 92 Bars Type 48, 86 Basic 65 B Gain
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 137
    area 60, 64 Maintenance 35, 105 Maintenance screen 50 Manual 91 Manual adjustment (R gain and B gain adjustment 20 Manual - Date/Time 65 Manual - End time & date 66 Manual - Start time & date 66 Manual - Summer time (daylight saving 66 Manual - Time zone 65 Matrix 36 Matrix Type 42 Max
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 138
    Index (continued) Preset Setting 82 Preset Speed 46, 82, 84 Preset Speed Table 46, 82, 84 Primary DNS server address 91 Primary server address 91 Priority Mode 8, 44, 65 Priority stream 89 Product info 106 Protocol 86 Protocol Model Select 49 R Reboot 107 Recommended network setting for
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 139
    Memo 139
  • Panasonic AW-HN40H | AW-HN38H Operating Instructions - Page 140
    Web Site: http://www.panasonic.com © Panasonic Corporation 2017
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
Operating Instructions
<Operations and Settings>
HD Integrated Camera
●
How the Operating Instructions are configured
<Basics>:
The <Basics> describes the procedure for basic operation and installation. Before installing this unit, be
sure to take the time to read through <Basics> to ensure that the unit will be installed correctly.
<Operations and Settings>
(this manual):
This <Operations and Settings> describes how to operate the unit and how to establish its settings.
Model No.
AW‑HN40HWPC
Model No.
AW‑HN40HKPC
Model No.
AW‑HN40HWE
Model No.
AW‑HN40HKE
Model No.
AW‑HN38HWPC
Model No.
AW‑HN38HKPC
Model No.
AW‑HN38HWE
Model No.
AW‑HN38HKE
ENGLISH
DVQP1509ZA
W1217TY0 -FJ