Panasonic AW-HN40H AW-HN38H Operating Instructions - Page 46

Camera menu items (continued) ■■Others 1/4 screen ### Others 1/4 ### Install Position Desktop Preset Speed Table Fast Preset Speed 10 Preset Scope Mode A Freeze During Preset Off Speed With Zoom POS. On Focus Mode Auto Focus ADJ With PTZ. ---- Return Install Position [Desktop, Hanging] "Desktop" or "Hanging" is selected here as the method used to install the unit. Desktop: Stand-alone installation Hanging: Suspended installation ●● When "Hanging" has been selected, the top, bottom, left and right of the images will be reversed, and up/down/left/right control for panning and tilting will also be reversed. Preset Speed Table [Slow, Fast] Set the preset speed table (Slow, Fast). During preset playback, preset actions are performed at Preset Speed (1 to 30) values that are based on the table set here. Slow: S et the preset speed table to "Slow". Fast: Set the preset speed table to "Fast". Preset Speed [1 to 30] There are 30 preset pan-tilt operation speeds when regenerating the camera direction and other information which are registered in the preset memory. Note ●● If a high value is selected for the Preset Speed setting, the image on the screen may shake when operation stops. Freeze During Preset [Off, On] Turn the function for freezing images during preset playback off/on. When this is set to "On", preset playback is performed with a still of the image immediately preceding the start of preset playback being output. The image freeze is released when preset playback is finished. Notes ●● When this is set to "On", the start of preset operations may be delayed momentarily due to the image being frozen. ●● When HDR is set to "Low" or "High", this is set to "Off". Speed With Zoom POS. [Off, On] "Off" or "On" is set here for the function used to adjust the camera direction's adjustment speed in conjunction with the zoom magnification. When "On" is set, the panning and tilting operations will become slower in the zoom status. This function has no effect during preset operations. Focus Mode [Auto, Manual] "Auto" or "Manual" is set here for the focusing function. Auto: The subjects are always brought into focus automatically. Manual: The focus is operated manually. Focus ADJ With PTZ. [Off, On] "Off" or "On" is set here for the function which compensates for out-of-focusing when it occurs during panning, tilting or zooming operations at the manual focus setting. This item can be selected only when "Manual" has been selected as the "Focus Mode" setting. Return Use this to return to the previous menu. Preset Scope [Mode A, Mode B, Mode C] Selected here are the setting items to be recalled when the contents of the preset memory are regenerated. Mode A: Pan, Tilt, Zoom (including digital zoom), Focus, Iris, Gain, White-BAL Mode B: Pan, Tilt, Zoom (including digital zoom), Focus, Iris Mode C: Pan, Tilt, Zoom (including digital zoom), Focus 46