Panasonic AW-HN40H AW-HN38H Operating Instructions - Page 86
CAM/BAR, Bars Type, Bars Title, OSD Mix, OSD Off With Tally, OSD Status, Protocol, Model Select
View all Panasonic AW-HN40H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Web screen configurations (continued) CAM/BAR Switch between color bar display and camera image display on the monitor and the web setup screen. Setting value: Camera, Colorbar Factory settings: Camera Note ●● When the color bar is displayed, a test tone (1 kHz) is output according to the Audio setting in the camera menu. zzProtocol Model Select Set the protocol model for standard serial communication. Do not select "Reserved1" to "Reserved7". Setting value: S EVIHD1, SBRC300, SBRCZ330, Reserved1 to 7 Factory settings: SEVIHD1 Bars Type Change the type of color bar to display. (page 48) Setting value: Type1, Type2 Factory settings: Type2 Bars Title Set camera title (page 66) display to Off/On for when the color bar is displayed. Factory settings: Off zzOSD Mix OSD Off With Tally This is used to enable or disable the function for clearing the OSD menu displays when the tally signal is received by a command or contact. When the tally signal is released, the original OSD menu displays are restored. Factory settings: Off OSD Status "Off" or "On" is set here for the status display which appears during AWB operations. Factory settings: Off 86