Panasonic AW-HN40H AW-HN38H Operating Instructions - Page 87
Multi screen setup screen [Multi-screen setup], IP address, Notes, Camera title
View all Panasonic AW-HN40H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Web screen configurations (continued) Multi screen setup screen [Multi-screen setup] The cameras whose images are to be displayed on the multi screen are set here. IP address Input here the IP address of the camera whose images are to be displayed on the multi screen or the host name. With one group consisting of 4 cameras, up to four groups of cameras (a total of 16 cameras) can be registered. Input as follows if the HTTP port number of the camera whose images are to be displayed has been changed. IPv4 address entry example http://192.168.0.10:8080 IPv6 address entry example http://[2001:db8:0:0:0:0:0:1]:8080 Enter the following when connecting via HTTPS. Example of input https://192.168.0.10/ Maximum number of characters 1 to 128 half-size characters Factory settings: Cam 1 to Cam 16: Not registered Notes ●● When connecting via HTTPS, install the security certificate for the camera to be displayed. (page 103) ●● When configuring a host name, the DNS settings of the personal computer that will display the multi screen must be configured. For details on the personal computer's DNS settings, consult your network administrator. Camera title Input the camera title here. The camera title which has been input is displayed on the multi screen. ●● You can enter between 0 to 20 half-size characters. ●● The following characters can be displayed. Half-size numeric 0123456789 characters Half-size alphabetical characters (upper and lower cases) ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz Symbols Factory settings: Cam 1 to Cam 16: blank Notes ●● When a 16-screen multi screen is selected, camera titles may be only partially displayed. ●● Multi screen displays are displayed in 4:3 aspect ratio. 87