Panasonic AW-HN40H AW-HN38H Operating Instructions - Page 20

White balance adjustment (continued) ●●Manual adjustment (R gain and B gain adjustment) White balance can be adjusted manually. Note ●● R/B gain adjustments can only be performed when White Balance Mode is set to "AWB A", "AWB B" or "VAR". 5 Press the [○] button. "White Balance Mode" starts blinking. 6 Press the [▲] or [▼] button to change the White Balance Mode to "AWB A", "AWB B" or "VAR", and press the [○] button to confirm the selection. When performing the operations using the wireless remote control ●● Steps 1 through 6 represent the procedure for selecting the "AWB A", "AWB B" or "VAR" memory. They need not be taken if a selection has already been made. 1 Select Manual1, Manual2 or Manual3 as the shooting mode by following the procedure in "Selecting the shooting modes (scene files)" (page 10). ** Camera ** Scene Contrast Picture Matrix Manual1 7 Press the [▲] or [▼] button to bring the cursor to "R Gain" or "B Gain." 8 Press the [○] button to make the "R Gain" or "B Gain" value blink. 9 Press the [▲] or [▼] button to change the "R Gain" or "B Gain" numerical value, and press the [○] button to enter the setting. When performing the operations using the controller When using an AW-RP50, AW-RP120 or AK-HRP200: Return Refer to the Operating Instructions of the controller. 2 Press the [▲] or [▼] button to bring the cursor to "Picture". 3 Press the [○] button. The "Picture 1/3" sub‑menu is displayed. *** Picture 1/3 *** Chroma Level White Balance Mode Color Temperature R Gain B Gain Pedestal 0 VAR 3200K 0 0 0 Return 4 Press the [▲] or [▼] button to bring the cursor to "White Balance Mode". 20