Panasonic AW-HN40H AW-HN38H Operating Instructions - Page 25
Operations on the AW‑RP50 Remote Camera Controller
View all Panasonic AW-HN40H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Basic operations (continued) ■■Operations on the AW‑RP50 Remote Camera Controller POWER ALARM F1 F2 F1 CAMERA OSD MENU STORE PAGE DELETE 1 2 3 4 5 GAIN/PED R/B GAIN R/B PED AWB/ABB SHUTTER 6 7 8 9 10 DETAIL SCENE/MODE CAMERA SETUP PRESET MEMORY / MENU SYSTEM F2 EXIT USER1 USER2 IRIS AUTO TELE ZOOM WIDE 1 AUTO 2 3 4 5 CAMERA STATUS / SELECTION FOCUS/PUSH OAF LOW HI PTZ/FOCUS SPEED PT ACTIVE For operating the camera menus. CAMERA OSD: When this is pressed for 2 seconds, the selected camera menu is displayed, overlapping the camera output image. When it is pressed for 2 seconds while a camera menu is displayed, the menu is exited. F1: Turn F1 to move the cursor up and down in the camera menu or to change setting values. Press F1 to move to the next level of a menu item or to change a setting value at the lowest level. For selecting the cameras to be operated. ●●Camera menu operation 1 Press the appropriate [CAMERA STATUS/ SELECTION] button to select the unit you want to operate. ●●Switching between Day and Night mode 1 Press the [MENU] button on the AW-RP50. The [MENU] button lights, and the [PRESET MEMORY/ MENU] buttons become selectable. 2 Press and hold the [CAMERA OSD] button on the AW-RP50 for about 2 seconds. The AW‑HN40/AW‑HN38 camera menu appears on the monitor. 2 Press the [9 (SETUP)] button in the [PRESET MEMORY/MENU] area. The button lights, and the SETUP menu appears on the LCD panel. 3 Turn the F1 dial to select an AW‑HN40/AW‑HN38 camera menu item or to change a setting value. Turn the F1 dial to move the cursor up and down or to change setting values. Press the F1 dial to move to the next level of a menu item or to change a setting value at the lowest level. 4 To exit the camera menu, press and hold the [CAMERA OSD] button for about 2 seconds. 3 Turn the F1 dial to select "FUNCTION", then press the F1 dial. 4 Turn the F1 dial to select "OPTION". "Off" or "On" appears on the bottom right (F2 area) of the LCD panel. 5 Turn the F2 dial to select "Off" or "On", then press the F2 dial. Off: Day mode On: Night mode ● Auto mode cannot be specified with this operation. 25