Panasonic AW-HN40H AW-HN38H Operating Instructions - Page 23

Basic operations (continued) Camera menu operation Wireless remote control Exiting the camera menu Press the [MENU] button for operations 2 seconds. Controller AW‑RP50 AW-RP120 AK-HRP200 Press the [CAMERA OSD] button for Press and hold the [CHARA/MENU] 2 seconds. button for about 2 seconds. Notes ●● Perform the menu operations and exit from the menus using the controller which displayed the Top Menu. If a menu operation has been performed or a menu has been exited using another controller, first display the Top Menu and exit from it using one controller, and then display the Top Menu and exit from it using the other controller. ●● The unit uses a different method to operate its menus from the one employed by the convertible cameras and HD integrated cameras which have already been launched onto the market. For details, refer to the Operating Instructions of the camera concerned. ●● The response speed of the camera differs slightly depending on the controller used. ●● Some functions may be limited for the following existing controllers. Item Camera OSD menu operation Scene Iris Mode Shutter Mode Gain ND Filter Day/Night White Balance Mode AWB/ABB Color Temperature R Gain / B Gain Pedestal R Pedestal / B Pedestal Detail V Detail Level CAM/BAR Pan Tilt Preset Preset Speed Preset Speed Table Preset Scope Freeze During Preset Focus Mode Zoom Digital Extender OIS Tally AW-RP555 Supported Supported *1 (1/2/3/USER) Supported Supported with some restrictions *2 (Step only) Supported *1 Not supported Supported with some restrictions *4 Supported *1 (AWB A/AWB B/ATW only) Supported Not supported Not supported Not supported Not supported Not supported Not supported Supported *1 Supported Supported Supported Not supported Not supported Not supported Not supported Supported with some restrictions *4 Supported Not supported Not supported Supported AW-RP655 Supported Supported (HALOGEN/FLUORESCENT/OUTDOOR/USER) Supported Not supported Supported with some restrictions *3 Not supported Supported with some restrictions *4 Supported (AWB A/AWB B/ATW only) Supported Not supported Supported Supported Supported with some restrictions *5 Not supported Not supported Supported Supported Supported Supported Not supported Not supported Not supported Not supported Supported with some restrictions *4 Supported Not supported Not supported Supported *1 If the setting value is changed on another device, it may take some time for the setting value to be applied. *2 If the Shutter Mode is not turned off/on after configuration, the value will not be changed. *3 Improper operation will occur when Gain is set to 19 dB or higher. *4 If the setting value is changed on another device, the setting value will not be applied. (If the value is configured locally on the device, the value will be applied.) *5 The value range display will be incorrect (-150 to +150). 23