Panasonic AW-HN40H AW-HN38H Operating Instructions - Page 116

Web camera functions (continued) Audio input mixer [Audio Input Mixer Properties] Enable/Disable (Mute) [Enable] The audio input signal from the device connected to the audio input connector can be turned off or on in the same way as "Audio" of the camera menus and Web settings. Setting value: 0 (Off), 1 (On) Volume Set the microphone input, line input, and volume in the same way as with "Input Volume" of camera menus and Web settings. Setting range: 0 to 1535 ●● The relationship to "Input Volume" of the camera menus and Web settings is as follows. 1535 to 1280 1279 to 1024 1023 to 768 767 to 512 511 to 256 255 to 0 Mic High Mic Middle Mic Low Line High Line Middle Line Low Notes ●● The volume may be adjusted automatically depending on the communication software used. Audio may not be stable depending on the combination of the unit and communication software. ●● Video and audio may not be stable depending on the performance of your personal computer or other device. In this case, reduce the resolution and frame rate of the video or input the audio not from the unit but from the personal computer or other device. Notes ●● In USB priority mode, H.264 image transmission cannot be performed for IP video. ●● When the device is connected by USB, the IP video JPEG(1) setting is forcefully changed to 320×180/5fps. 116