Panasonic AW-HN40H AW-HN38H Operating Instructions - Page 63
Web screen configurations, Logging into the Web setup screen [Setup
View all Panasonic AW-HN40H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Web screen configurations Logging into the Web setup screen [Setup] 1. Turn on the power of the unit from the standby mode state. 4. Click the [OK] button. Click [OK] again when the following screen appears. 2. Click the [Setup] button. (page 56) The login screen appears. 3. Enter the user name and password. The factory settings for the user name and password are as follows. User name admin Password 12345 Notes ●● While the initial settings remain used for the user name and password, a message prompting the user to change the user name and password is displayed after authorization. In order to ensure security, the password for the user name of "admin" must be changed without fail. It is also recommended that the password be changed at regular intervals. ●● During Standby mode, the [Setup] button is disabled, and you cannot switch to the web setup screen [Setup]. 63