Panasonic AW-HS50 System Camera and Switcher Product Lineup Catalog - Page 10
AK-MSU1000GJ, AK-HVF100GJ, AK-HBU500GJ, AK-HRP1000GJ/HRP1005GJ - embedded audio
View all Panasonic AW-HS50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
4K/HD Studio Camera System Specifications & Dimensions AK-UCU500PJ/UCU500EJ/UCU500PSJ/UCU500ESJ Power Supply AK-UCU500P/AK-UCU500PS: 100 V - 120 V AC, 50 Hz/60 Hz AK-UCU500E/AK-UCU500ES: 100 V - 240 V AC, 50 Hz/60 Hz Power Consumption 500 W (Without camera connected: 70 W) Capacity for Supplying Power to a Camera 240 V AC (tolerance: 5%), 1.46 A , 50 Hz/60 Hz Operating Temperature 0°C to 40°C (32°F to 104°F) Humidity 10% to 90% (no condensation) Weight Approx. 8.8 kg (19.4 lb) Dimensions (W x H x D) 424 mm x 88 mm x 401 mm (16-5/8 inches x 3-7/16 inches x 15-13/16 inches) (excluding protrusions) Video Output 3G/HD/SD-SDI: 7 lines (embedded audio is supported only for HD signals) HD/SD-SDI: 1 line (shared with picture monitor output*1 ; embedded audio is supported only for HD signals) Analog composite: 2 lines (1 line shared with picture monitor output*1) HD TRUNK Output HD-SDI: 1 line (cannot be used in UHD/HS mode) Return Input 3G-HD/HD/SD-SDI: 4 lines (RET1 input has active-through output) Analog composite: 1 line HD-SDI: 1 line (with active-through output) Prompter Input Analog composite: 2 lines (through output of 1 and input of 2 share the connector*1) It is not terminated when the unit is turned OFF. No through output. BB (black burst) / tri-level*2: 1 line Reference Input (automatic termination, connect to upper connector; BB signal and tri-level signal automatically recognized, with loop-through output) Microphone Output 0 dBm/600 Ω, 2 lines (XLR, 3-pin, male) Communication Intercom input/output (ENG / PROD, 0 dBm, 600 Ω (4 W) / 1 V [p-p], 200 Ω (RTS), 4 W / RTS / CLRCOM) : 2 lines*1 PGM input (0 dBm/600 Ω) : 2 lines Tally input (red, green, yellow) : 1 input each WFM control 6-bit (open collector output, terminal shared with AUX camera microphone gain setting*1) Camera microphone gain setting input 5-bit (photo-coupler input, terminal shared with WFM control*1) Down-conversion system setting input 2-bit (photo-coupler input) TRUNK RS-422 / RS-232C 2 lines*1 RS-422 FRONT ROP 1 line, 16 V DC output (only one of this and REAR ROP can be selected at one time via the menu or the [ROP FRONT/ REAR] selection switch on the front panel) RS-422 REAR ROP 1 line, 16 V DC output (only one of this and FRONT ROP can be selected at one time via the menu or the [ROP FRONT/ REAR] selection switch on the front panel) MSU RS-422 1 line, GPI for control LAN TRUNK LAN connection with camera side via an optical cable*3 1 line, 100BASE-T, 1000BASE-T Personal computer connection for distribution via the Web*3 LAN 1 line, 10BASE-T, 100BASE-TX (use a crossover cable when connecting directly with a personal computer) AK-HRP1000GJ/HRP1005GJ AK-HRP1000GJ AK-HRP1005GJ Power Supply 12 V DC (Power supply from camera: 10 V - 16 V DC) 42 V - 57 V DC (PoE power supply) Power Consumption 0.51 A (Power supply from 0.44 A (Power supply from camera: 10 V - 16 V DC) camera 10 V - 16 V DC) 0.15 A (PoE power supply) 0.11 A (PoE power supply) Operating Temperature 0°C to 40°C (32°F to 104°F) Humidity 90% or less Storage Temperature -20°C to 60°C (-4°F to 140°F) Weight Approx. 1.7 kg (3.75 lb) Approx. 1.5 kg (3.31 lb) 102 mm x 385 mm x 113 mm 82 mm x 355 mm x 124.4 mm Dimensions (W x H x D) (4 inches x 15-3/16 inches x (3-1/4 inches x 14 inches x 4-7/16 inches) 4-7/8 inches) Camera/CCU Control Control signals (camera, CCU control) Power supply 16 V DC (when CCU connected)*4, 12 V DC (when camera connected)*4 Maximum Cable Length When camera connected: 20 m (65.7 ft) When CCU connected: 50 m (164 ft) AK-MSU1000GJ Power Supply 12 V DC (DC input range: 10 V - 16 V DC) 42 V - 57 V DC (PoE+ power supply) Power Consumption 1.6 A (Power supply: 12 V DC) 0.6 A (PoE+ power supply) Operating Temperature 0°C to 40°C (-4°F to 140°F) Humidity 90% or less Storage Temperature -20°C to 60°C (-4°F to 140°F) Weight Approx. 4.0 kg (8.82 lb) 482 mm x 222 mm x 81.5 mm Dimensions (W x H x D) (18-31/32 inches x 8-3/4 inches x 3-7/32 inches) (including mounting brackets and dial heights) Scene file, ND filter, CC filter, Color temperature Adjustment Functions (COLOR TEMP), Master gain (MASTER GAIN), Shutter (SHUTTER), Master pedestal (MPED), Iris (IRIS), Camera selection CCU Control RS422 or IP Maximum Cable Length When CCU connected: 50 m (164 ft) AK-HVF100GJ Power Supply DC 12 V (supplied from camera or XLR) Power Consumption 18 W Operating Temperature 0 °C to 45 °C (32 °F to 113 °F) Operating Humidity 10% - 85% (no condensation) Storage Temperature -20 °C to 60 °C (-4 °F to 140 °F) Weight Approx. 2.6 kg (5.73 lbs.) (not including hood) / Approx. 3.0 kg (6.61 lbs.) (including hood) 340 mm x 234 mm x 193 mm (13-13/32 inches x 9-7/32 inches x 7-5/8 inches) Dimensions (W x H x D) (not including hood) 340 mm x 234 mm x 231 mm (13-13/32 inches x 9-7/32 inches x 9-1/8 inches) (including hood) Display Panel 9.0 inches Number of Pixels 1920 x 1080 (FHD) Display Color Approx. 16.77 million colors Operation switch, button, dial button, /// buttons, knob, knob, knob, switch Connector Camera I/F connector (D-sub 29 pins x 1) SDI IN connector (BNC x 1) DC IN connector (XLR 4 pins x 1) CAM: 1080/59.94i, 1080/50i Supported Signal Format SDI: 1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i, 720/59.94p, 720/50p AK-HBU500GJ Power Supply Power Consumption 12 V DC (when external power is supplied) 240 V AC 50 Hz/60 Hz (when AK-UCU500 is connected) 70 W (when external power is supplied) 165 W (when AK-UCU500 is connected) Operating Temperature -10°C to 45°C (14°F to 113°F) Operating Humidity Range 85% or less (relative humidity) Storage Temperature -20°C to 60°C (-4°F to 140°F) Weight Approx. 12.8 kg (28.22 lb) (unit only) Dimensions (W x H x D) 300 mm x 417 mm x 510 mm (16-7/16 inches x 20-1/16 inches x 11-13/16 inches) Camera Number Display 1 to15 (depending on system settings) LENS I/F Connector 36-pin x 1 CAMERA I/F Connector 20-pin x 1 [DC IN] Connector XLR x 1, 4-pin, 12 V DC [DC OUT 12V 1.5 A] Connector 4-pin x 1 [DC OUT 12V 7.5 A] Connector XLR x 1, 4-pin *1: Depending on the setting, only one of them can be selected at one time. *2: The BB (black burst) signal and tri-level sync signal of the reference input are recognized automatically. *3: IP video cannot be transmitted when [CCU MODE] is set to [2160/23.98p], [2160/23.98PsF], [1080/23.98p], or [1080/23.98PsF]. *4: Can be provided from CCU 10