Panasonic AW-HS50 System Camera and Switcher Product Lineup Catalog - Page 73

Studio Camera System Remote Camera System As of April, 2017 Synchronous Terminal Reference Input/Output In gen-lock mode: Black burst or Tri-level Sync input signals (with loop-through) In internal sync mode: Black burst output signals x 2 • Same field frequencies as those of the system formats supported • With the 1080/23.98PsF and 24PsF formats, only GENLOCK mode supported • With the 1080/23.98PsF format, black burst with 10F-ID (SMPTE318M standard met) or TRI signals supported FS OFF, U/C OFF 1 line (H) Video Delay Time FS ON or U/C ON 1 frame (F) • When the signals have passed through DVE, multi view, down-converter, DVI-IN or DVI-OUT, a maximum delay of 1 frame is applied in each case. Control Terminal PANEL LAN EDITOR COM TALLY/GPI RJ45 x 1 100 Mbps • When the control panel is connected RJ45 x 1 100/10 Mbps • Used for maintenance purposes D-sub, 9-pin, female RS-422 control connector • GVG standard protocol subset supported D-sub, 9-pin, female RS-422 control connector • For Panasonic pan-tilt head system control, etc. D-sub, 50-pin, female INPUT: 8 inputs, general-purpose, photocoupler sensing OUTPUT: 31 outputs; selected from R/G tally, general-purpose ALARM: 1 output, open collector output (negative logic) Control panel [AV-HS450C1N/E] General DC 12 V, 0.8 A • Redundant operation enabled by connecting two AC adaptors • Power consumption when using the AC adaptor: AC 14 W Power Supply Supplied AC adaptor Input: AC 100 V to 240 V, 1.3 A, 47-63 Hz Output: DC 12 V, 3.5 A, 42 W Supplied power cable Maximum rating: AC 125 V • Use within AC 100 V to 120 V. Ambient Operating Temperature 0 °C to 40 °C (32 °F to 104 °F) Humidity 10 % to 90 % (no condensation) Dimensions (W x H x D) 560 x 88 x 299 mm (22-1/16˝ x 3-7/16˝ x 11-3/4˝) [excluding protrusions] Weight 3.9 kg (8.598 lbs.) [excluding accessory parts] Control Terminal MAINFRAME TALLY/GPI RJ45 x 1 100 Mbps • For connecting the mainframe D-sub, 25-pin, female INPUT: 8 inputs OUTPUT: 8 outputs ALARM: 1 output Other SD Memory Cards Memory size supported: Max. 32 GB (SDHC memory cards supported) Still image files: Load, save Setup data: Backup Accessories Operating instructions, CD-ROM (Operating instructions/Image transmission software), AC adaptors (for control panel), Power cords (for mainframe and AC adaptor), CAT5E cable (STP, straight cable, 10 m (32.8 ft.) long) AV-HS450 Block Diagram SDI 1- 8 SDI 9 -16 VIDEO PROCESS ME Image Effect BKGD MIX WIPE DVE(2ch) KEYER KEY PinP 1 PinP 2 Linear, Lum, Full PinP Chroma - - DVE (2D) DVE DVE EDGE Border Border Input Matrix Input Process Internal Source •CBGD •CBAR •Black Frame Memory •FMEM1- 4 A1-A2 B1-B2 DSK 1- 2 AUX 1- 4 MV 1- 2 KEY1 KEY2 Linear, Lum EDGE EDGE AUX 1 MIX transition AUX 2-4 (CUT) Option Slot A-B Output Matrix SDI 1- 4 DVI 1- 2 A1-A2 B1-B2 Live Switcher 73