Panasonic AW-HS50 System Camera and Switcher Product Lineup Catalog - Page 46

Remote Camera System - Specifications Dimensions AW-HE130W/K General Power Requirements DC 12 V (AC adaptor supplied) DC 42 - 57 V (PoE+ power supply) 1.8 A (AC adaptor supplied) 0.6 A (PoE+ power supply) Ambient Operating Temperature 0 °C to 40 °C (32 °F to 104 °F) Allowable Humidity Ranges 20 % to 90 % (no condensation) Storage Temperature -20 °C to 50 °C (-4 °F to 122 °F) Mass Approx. 3.1 kg (6.83 lb) [Including mount bracket] 180 mm x 228 mm x 234 mm Dimensions (W x H x D) (7-3/32 inches x 9 inches x 9-3/16 inches) (excluding protrusions, cable cover, direct ceiling mount bracket) Finish AW‑HE130WP/AW-HE130WE: Pearl white AW‑HE130KP/AW-HE130KE: Metallic black Controller Supported*1 AW-RP120G, AW‑RP50, AK-HRP200G Camera Unit Imaging Sensors 1/2.86-type Full-HD 3MOS Optical 20 zoom, F1.6 to F3.4 Lens (f=4.5 mm to 90 mm; 35 mm equivalent: 32.13 mm to 642.5 mm) Focus Switching between auto and manual Focus Distance Entire zooming range: 800 mm (2.62 ft) Wide end: 400 mm (1.31 ft) Color Separation Optical System 3MOS Minimum Illumination 2 lx (50 IRE, F1.6, 36 dB) Horizontal Resolution 1000 TV lines Typ (Center area) Gain Selection Auto, 0 dB to 36 dB Frame Mix*2 0 dB, 6 dB, 12 dB, 18 dB, 24 dB 59.94p/ 1/100, 1/120, 1/250, 1/500, 59.94i 1/1000, 1/2000, 1/4000, 1/10000 29.97p 1/30, 1/60, 1/120, 1/250, 1/500,1/1000, 1/2000, 1/4000, 1/10000 Electronic Shutter Speed 23.98p 1/24, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 50p/50i 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 25p 1/25, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 Synchro Scan 59.94 Hz 60.15 Hz to 642.21 Hz 50 Hz 50.15 Hz to 535.71 Hz Gamma HD, SD, FILMLIKE1, FILMLIKE2, FILMLIKE3 0.30 to 0.75 (Manual setting) White Balance AWB A, AWB B, ATW, 3200K, 5600K, VAR (2000K to 15000K) Chroma Amount Variability OFF, -99 % to 40 % Scene File Scene1, Scene2, Scene3, Scene4 Synchronization System Synchronization System Internal/External synchronization (BBS/Tri-level sync) Output Video output HDMI HDMI connector • HDCP is not supported. • Viera Link is not supported. HD/ SMPTE424/SMPTE292/ SD-SDI OUT SMPTE259 standards 75 Ω (BNC x 1) VIDEO OUT NTSC/PAL 1.0 V [p-p]/75 Ω (BNC x 1) Input/Output LAN LAN connector for IP control (RJ‑45), PoE+ RS-422 CONTROL IN RS-422A (RJ‑45) Input/ Output connector MIC/LINE input ø3.5 mm stereo mini jack Input impedance: High impedance • During MIC input Supported mic: Stereo mic (plug-in power, on/off switching via menu) • Supply voltage: 2.5 V ± 0.5 V Mic input sensitivity: Approx. -40 dBV ± 3 dBV (0 dB=1 V/Pa, 1 kHz) • During LINE input Input level: Approx. -10 dBV ±3 dBV Pan-tilt Head Unit Installation Method Stand-alone (Desktop) or suspended (Hanging)*3 Camera/Pan-tilt Head Control IP connecting cable • When connecting through a PoE+ hub: LAN cable*4 (category 5e or above, straight cable), max. 100 m (328 ft) • When a PoE+ hub is not used: LAN cable*4 (category 5 or above, crossover cable) max.100 m (328 ft) RP connecting Cable LAN cable*4 (category 5 or above, straight cable), max. 1000 m (3280 ft) RS-422A, AW series protocol Pan-tilt Operation Speed 0.08°/s to 60°/s Panning Range ±175° Tilting Range*7 -30° to 210° *5 Quietness NC35 or less Standard Accessories Mount bracket for installation surface (Hanging*6 / Desktop): 1, Dropprevention wire: 1, Drop-prevention wire mounting screw (comes attached to the unit): 1, Bracket mounting screws (bind-head) M4 x 10 mm: 4, Main unit mounting screw (with flat washer,spring washer) M3 x 6 mm: 1, Cable cover: 1, Power cable: 1, AC adaptor: 1, CD-ROM *1: It may be necessary to upgrade the version of the controller in order to support the unit. For details on upgrading, visit the support page on the following website. http://pro-av.panasonic.net/ *2: This cannot be configured when the format is 1080/29.97p, 1080/23.98p, 1080/29.97PsF 1080/23.98PsF, 1080/25p, or 1080/25PsF. *3: To ensure safety, the unit must be secured using the mount bracket supplied. *4: Use of an STP (shielded twisted pair) cable is recommended. *5: Depending on the pan or tilt position, the camera may be reflected in the image. *6 : To ensure more safety, AW-HE130W/K can be secured by using the direct ceiling mount bracket (WV-Q105A). Input Input Connector 46 DC 12 V IN, G/L IN (BNC) • BBS (Black Burst Sync), tri-level sync supported • Locking to a color subcarrier is not possible with BBS. PoE+ (IEEE802.3at standard) *For informations on "Output Signal Format", see page 38.