Panasonic AW-HS50 System Camera and Switcher Product Lineup Catalog - Page 47

Studio Camera System Dimensions (Front) (Side) Unit: mm(inches) Rear View 125 (4-29/32) As of April, 2017 225 (8-27/32) 71 (2-25/32) 175 (6-7/8) Remote Camera System 3 (1/8) 180 (7-3/32) 90 (3-17/32) 234(9-3/16) Pin Configuration (Common for AW-UE70W/K, AW-HE130W/K, AW-HE40 series) RS-422 Connector This RS-422 connector (RJ45) is connected when exercising serial control over the unit from an external device. Use a cable with the following specifications for the connection to this connector. The tally lamp can be lit by shorting the TALLY signal (pin 2) with GND (pin 1). • Do not apply a voltage to the TALLY signal pin. LAN cable*1(category 5 or above, straight cable), max. 1000 m (3280 ft) * Use of an STP (shielded twisted pair) cable is recommended. Pin NO. Signal Pin NO. Signal 1 GND 5 TXD+ 2 TALLY 6 RXD+ 3 RXD- 7 - 4 TXD- 8 - RS-232C Connectors Connects to an RS-232C cable. 8 5 4 76 3 2 1 RS-232C IN Pin NO. Signal 1 DTR_IN 2 DSR_IN 3 TXD_IN 4 GND 5 RXD_IN 6 GND 7 IR OUT R 8 IR OUT L RS-232C OUT Pin NO. Signal 1 DTR_OUT 2 DSR_OUT 3 TXD_OUT 4 GND 5 RXD_OUT 6 GND 7 NC 8 NC Bottom View Unit: mm(inches) (Space for the wires) 320(12-19/32)or more Through-hole for cable ø 40 mm(ø 1-9/16 inches) (reference) Unit mounting area Hole for mounting the main unit mounting screw Hook for mounting the drop-prevention wire Mount bracket Holes for mounting the mount bracket ø 4.5 mm x 4 160(6-5/16) (Space for the wires from the rear panel) 88(3-15/32) 136(5-11/32) 108(4-1/4) 83.5(3-9/32) 90(3-17/32) Hole for checking the positioning 46(1-13/16) 176(6-15/16) 180(7-3/32) Hole for installing the WV-Q105A direct ceiling mount bracket [ø 60 mm (ø 2-3/8 inches)] The front panel of the unit on this side. Ceiling Installation View Optimal for both hanging and desktop installation. The mounting bracket and droppreventation wire are standard accessories. Ceiling and desktop installation are both possible. Mount the bracket onto the installation surface and then put and turn the main unit on the bracket to be installed. Approx. 20° Drop-prevention wire Use these screw holes when securing the unit to a tripod, etc. (Screw: 1/4-20 UNC, ISO 1222 (6.35 mm)) AW-HE120W/K installation mount bracket can be used. The mounting bracket for HE130 differs from that of discontinued AW-HE50 and AW-HE60 and current AW-HE40 series. * Wiring, mounting, and removal must be done by a qualified technician. 47 To ensure safety, consult with the dealer from whom you purchased the system. Live Switcher