Panasonic AW-HS50 System Camera and Switcher Product Lineup Catalog - Page 70

Live Switcher - Specifications AV-HS6000 Mainframe [AV-HS60U2P/E] General Power Supply AC100 V to 240 V, 50 Hz/60 Hz (AV-HS60U2 supports redundant power supply) Power Consumption 110 W Ambient Operating Temperature 0°C to 40°C (32°F to 104°F) Operating Ambient Humidity 10% to 90% (no condensation) Storage Temperature 0°C to 40°C (32°F to 104°F) Storage Humidity 10% to 90% (no condensation) Weight Approx. 13.5 kg(29.7 lbs.) [excluding accessories] Dimensions (W x H x D) 482 mm x 132 mm x 418 mm (18-31/32 inches x 5-3/16 inches x 16-15/32 inches) [excluding protrusions] Video Terminal During Standard mode 32 lines • Connectors: BNCx32 • SDI IN 27, SDI IN 28, SDI IN 31, SDI IN 32 terminals are equipped with up-converters. • SDI IN 25 to SDI IN 32 terminals are equipped with color correctors. HD-SDI SMPTE292M (BTA S-004) standard compliant • 0.8 V [p-p]±10% (75 Ω) • Automatic equalizer more than 100 m(328 ft) (when 1.5 Gbps/5C-FB cable is used) SDI IN 1 to SDI IN 32 Terminals SMPTE259M standard compliant SD-SDI • 0.8 V [p-p]±10% (75 Ω) • Automatic equalizer 200 m (656 ft) (when 5C-2V cable is used) During 3G mode 16 lines • Connector: BNC×16 (only the odd numbered terminals can be used) • The even numbered terminals , ... cannot be used. • , , , and terminals are equipped with color correctors. During 4K mode 4K signal x 8 lines • Connector: BNC x 32 (3G-SDI x 4 SQD / 2SI) 3G serial digital, SMPTE424M standard compliant 3G-SDI • 0.8 V[p-p] ±10% (75 Ω) • Automatic equalizer 100 m (328 ft) (when 3 Gbps/5C-FB cable is used) • 3G SDI Level B • 3G SDI Level A (FS ON) 2 lines Digital RGB: XGA (1024 x 768), WXGA (1280 x 768), DVI-D IN 1 to DVI-D IN 2 Terminals SXGA (1280 x 1024), WSXGA+ (1680 x 1050), UXGA (1600 x 1200), WUXGA (1920 x 1200) Vertical frequency: 60 Hz Video format inputs: 1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i, 720/59.94p, 720/50p • Connectors: DVI-D x 2 • The terminals do not support HDCP. • The DVI-I connector cable cannot be used. • For the DVI-D connector cable, use a cable with a length of up to 5 m.(16.4 ft) • / terminals cannot be used during 3G / 4K mode. During Standard mode 16 lines (2 distributed outputs per line) • Connectors: BNC x 32 • ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, ME2KEYPVW, DSKPGM1, DSKPGM2, DSKPVW1, DSKPVW2, DSK1CLN, DSK2CLN, DSK3CLN,DSK4CLN, SEL KEYPVW, MV1 to MV4, and AUX1 to AUX16 can be assigned. HD-SDI SMPTE292M (BTA S-004) standard compliant • Output level: 0.8 V [p-p]±10% SD-SDI SDI OUT 1 to SDI OUT SMPTE259M standard compliant • Output level: 0.8 V [p-p]±10% 16 Terminals During 3G mode 3G‑SDI output: 8 lines (2 distribute outputs per line) HD-SDI output: 2 lines (2 distribute outputs per line) • Connector 3G‑SDI: BNC×16 (odd numbered terminals only) HD-SDI: BNC×4 ( and terminals only) • 3G‑SDI signal is not output from the even numbered terminals. - No signal is output from the , ... terminals. - The HD-SDI signal converted to the 1080i format is output 70 from the and terminals. This signal is converted to the 1080i format by decimating the 1080p signal from the and terminals. SDI OUT 1 to SDI OUT 16 Terminals SD Signal Formats HD 3G 4K Signal Processing ME Number • and terminals are equipped with color correctors. The same color corrector setting is also applied to and terminals. • ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, DSKPGM1, DSKPGM2, DSKPVW1, DSKPVW2, DSK1CLN, DSK2CLN, SEL KEYPVW, MV1 to MV2, and AUX1 to AUX8 can be assigned. During 4K mode 4K signal output: 3 lines (two distribute outputs per line) 2K signal output: 2 lines (two distribute outputs per line) • Connector 3G-SDI (for 4K signal): BNC x 24 (terminal number 1 to 12) 3G-SDI (for 2K signal): BNC x 4 (terminal number 13 and 15) HD-SDI (for 2K signal): BNC x 4 (terminal number 14 and 16) • The 4K signal is output in SQD format. • The HD-SDI signal converted to the 1080i format is output from the and terminals. This signal is converted to the 1080i format by decimating the 1080p signal output from the and terminals. • ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, DSKPGM1, DSKPGM2, DSKPVW1, DSKPVW2, DSK1CLN, DSK2CLN, SEL KEYPVW, MV1 to MV2, and AUX1 to AUX8 can be assigned. 3G serial digital, SMPTE424M standard compliant 3G-SDI • Output level: 0.8 V [p-p] ±10% • 3G‑SDI Level B Mapping 480/59.94i, 576/50i 1080/59.94i, 1080/50i, 720/59.94p, 720/50p, 1080/24PsF, 1080/23.98PsF, 1080/25PsF, 1080/29.97PsF 1080/59.94p, 1080/50p 2160/59.94p, 2160/50p Y:PB:PR 4:2: 2 10 bit R: G: B 4: 4: 4 8 bit 2 ME Synchronous Terminal • Connectors: BNC • Same field frequencies as those of the system formats supported In Genlock mode: Black burst or Tri-level Sync input signals REF Terminal (with loop-through) • If the loop-through output is not used, provide a 75 Ω termination. • In the 1080/24PsF and 1080/23.98PsF formats, only Genlock mode supported • In the 1080/23.98PsF format, black burst signals with 10 Field ID (SMPTE318M standard compliant) or Tri-level Sync signals supported • In the 1080/24PsF format, Tri-level Sync signals supported In internal sync mode: Black burst output signal x 2 This is the LTC (linear time code) input terminal. LTC IN Terminal • Connectors: BNC • Impedance: 1 kΩ • Level: 1 to 2 V [p-p] During Standard mode 1 line (H) When the frame synchronizer is set to "Off" and the up-converter is set to"Off" 2 field (V) When the frame synchronizer is set to "On", or the up-converter is set to "On" Video Delay Time • When the signals have passed through PinP, DVE, MultiView, downconverter, or DVI-IN, a maximum delay of 1 frame is applied in each case. During 3G mode 2 line (H) When the frame synchronizer is set to [Off] 2 frame (V) When the frame synchronizer is set to [On] • Maximum of 2 frame delay is added to each when passed through PinP, DVE, or MultiView. Control Terminal LAN Terminal PANEL Terminal COM1(M)/COM2(M)/ COM3(M)Terminals COM4(M/S) Terminal GPI IN Terminal Compatible with 100Base-TX and AUTO-MDIX (For IP control) • Connection cable: LAN cable (CAT5E), max. 100 m (328 ft), STP (Shielded Twisted Pair) cable recommended • Connector: RJ-45 Compatible with 100Base-TX and AUTO-MDIX (For Control Panel AV-HS60C2/AV-HS60C4connection) • Connection cable (supplied with AV-HS60C2/AV-HS60C4): LAN cable (CAT5E), straight cable, STP (Shielded Twisted Pair), 10 m (32.8 ft) • Connector: RJ-45 RS-422 Control Terminal For master connection for controlling external devices • Connector: D-sub 9-pin (female) x 3, inch screw RS-422 Control Terminal For master/slave connection for controlling external devices • Connector: D-sub 9-pin (female), inch screw • Switchable between master connection and slave connection via menu GPI IN: 18 inputs, general-purpose, photocoupler sensing ALARM OUT: 1 output, open collector output (negative logic) • Connector: D-sub 25-pin (female), inch screw