Panasonic AW-HS50 System Camera and Switcher Product Lineup Catalog - Page 64
Live Switcher Specification Comparison
View all Panasonic AW-HS50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Live Switcher Specification Comparison ME Video Format 4K/3G HD Video Processing SD Y: PB:PR RGB Input SDI Video Input DVI-D/DVI-I Optional Board Output SDI Video Output DVI-D Optional Board Reference Input/Output AV-HS6000*1 2ME 2160/59.94p (4K mode)*2, 2160/50p (4K mode)*2, 1080/59.94p (3G mode), 1080/50p (3G mode) 1080/59.94i, 1080/50i, 1080/24PsF, 1080/23.98PsF, 1080/25PsF, 1080/29.97PsF, 720/59.94p, 720/50p AV-HS450 1080/59.94i, 1080/50i, 1080/24PsF*4 , 1080/23.98PsF*4, 720/59.94p, 720/50p 4 : 2 : 2 10 bit 4 : 2 : 2 10 bit (8 bit for FMEM) 34 signal lines 32 lines, BNC x 32 HD (SMPTE292M)/3G (SMPTE424M)/SD (SMPTE259M) standard, 0.8 V [p-p] ± 10 %(75 Ω) 16 signal lines, standard 20 signal lines, maximum Standard SDI: 16 lines, BNC x 16 HD (SMPTE292M)/SD (SMPTE259M) standard, 0.8 V [p-p] ±10 % (75 Ω) 2 signal line DVI-D x 2 Digital RGB: XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024), WSXGA+ (1680 x 1050), UXGA (1600 x 1200), WUXGA (1920 x 1200) Vertical frequency: 60 Hz - Video format inputs: 1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i, 720/59.94p, 720/50p 16 signal lines 16 lines, BNC x 32 (2 distributed outputs per line) HD (SMPTE292M)/3G (SMPTE424M)/SD (SMPTE259M) standard, 0.8 V [p-p] ± 10 % - - Maximum of 4 inputs (IN A1, A2, B1, B2)(Up to 2 optional 6 signal lines, standard 10 signal lines, maximum Standard SDI: 4 lines, BNC x 5 (2 output distribution for OUT 1) HD (SMPTE292M)/SD (SMPTE259M) standard, 0.8 V [p-p] ±10 % (75 Ω) Standard DVI-D: 2 lines, DVI-D x 2, (OUT 5, 6) Digital RGB: XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024), WSXGA+ (1680 x 1050), UXGA (1600 x 1200), WUXGA (1920 x 1200) Vertical frequency: 60 Hz Video format outputs: 1080/50P, 1080/59.94P (Analog output signals are not supported) Maximum of 4 outputs (OUT A1, A2, B1, B2)(Up to 2 optional Mainframe BNC GENLOCK mode: Black burst or Tri-level Sync input signals (with loop-through) • Same field frequencies as those of the system formats supported. • With the 1080/23.98PsF, 1080/24PsF format, only GENLOCK mode supported. • With the 1080/23.98PsF format, black burst with 10F-ID (SMPTE318M standard met) or TRI signals supported. Internal sync mode: Black burst output signals x 2 PANEL/MAINFRAME RJ45 x 1, Compatible with 100Base-TX and AUTO-MDIX (to connect between the mainframe and the control panel) RJ45 x 1, 100 Mbps (to connect between the mainframe and the control panel) EDITOR COM - Mainframe, D-sub 9 pin x 4, RS-422*3 Control Panel: D-sub 9 pin x 2 (RS-422 x 1, RS-232C x 1) Mainframe, D-sub 9 pin x 1, RS-422 (GVG protocol compatible) Mainframe, D-sub 9 pin x 1, RS-422 (pan-tilt system control) Interface TALLY/GPI LAN Control Panel Menu Panel Multi-Selection Panel Mainframe: D-sub25 pin x 1 GPI IN x 18 (general-purpose, photocoupler sensing), GPIOUT x 48 (selected from general purpose, tally, Open collector output), ALARM OUT x 1 (open collector output, negative logic) Control Panel: D-sub 25 pin x 1 GPI IN x 8 (general-purpose, photocoupler sensing), GPIOUT x 10 (selected from general purpose, tally, Open collector output), ALARM OUT x 1 (open collector output, negative logic) Mainframe: Compatible with 100Base-TX and AUTO-MDIX (For IP control) Discrete (menu DVI-D output; USB mouse menu control) Discrete Provided for each ME Mainframe: D-sub 50 pin x 1 GPI IN x 8 (general-purpose, photocoupler sensing), GPI OUT x 31 (general-purpose, selected from R/G tally, open collector output), ALARM OUT x 1 (open collector output, negative logic) Control Panel: D-sub 25 pin x 1 GPI IN x 8, GPI OUT x 8, ALARM OUT x 1 Mainframe, RJ45 x 1, 10 BASE-T/100 BASE-TX Discrete Removable Media 64 SD Memory Card Supported by the control panel, Capacity: Maximum 32 GB (SDHC Memory Card compatible) Still image file/movie clip file/Project file (including memories): Loading/saving, Software: Loading, Log data: saving SD Memory Card Supported by the control panel, Capacity: Maximum 32 GB (SDHC Memory Card compatible) Still image file: Loading/saving, setup data: backup *1: For information on 4K/3G mode, see page 59. *2: Firmware Ver. 4 or later required. For details, see "Service and Support" on the Panasonic website (http:// pro-av.panasonic.net/en/ ).